Question about 1999 Ford Windstar

2 Answers

1999 ford windstar no heat blows only cold already replaced blend door. It was making the knocking noise when the a/c was on.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Did you replace the actuator behind the radio ?

Posted on Mar 05, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 26 Answers

Fill up the rad with coolant then check heat again or you might need a new radiator..check for leaks.
Fill reservoir up, look for any puddles.
maybe the heater core might be shot as well.

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cold air comes out front vents in 1999 windstar


Usually a sign of a faulty blend door under the dash. The blend doors direct air thru the heater core and the vent outlets. One blend door is directly behind the radio.

Dec 18, 2012 | 1999 Ford Windstar

1 Answer

My heat went in my 2004 ford explorer...its blowing colding and there is a knocking noise


The knocking noise is the key. Assuming the coolant level is correct, and the thermostat is working correctly, it sounds like you have a blend door actuator concern. If the knocking noise is coming from the center dash area, the blend door needs to be replaced. The radio and center trim will need to be removed, the blend door removed and the blend door needs to be manually moved to verify heat. Good luck.

Apr 04, 2011 | 1998 Ford Explorer

1 Answer

1999 WINDSTAR front heater not working blowing cool air, rear heater works fine


There is a huge problem with the blend doors on the Ford Windstars. To access the Blend doors, the dash must be pulled and the plenum box removed. It is very labor intensive. Alternatively, there is a way to remove the glovebox, make an incision in the plenum box, and replace the blend door. There is more info on the problem here: http://www.heatertreater.net/Final%20Tech%20info.htm#History

Nov 16, 2010 | 1999 Ford Windstar

1 Answer

1999 ford windstar making knocking noise in the dash when i change heat from hot to cold


hot/cold vent actuator door is damaged/faulty. This may cause the vents to blow cold only or hot only or no air at all!!

Apr 21, 2010 | 2000 Ford Windstar

1 Answer

Heater blowing cold air


make sure cooling systen is full if it appears that the cooling system is doin its job, then behind the radio is a blend door motor also sometimes makes a clicking noise when broken.....
part about 75 bucks and will need a 8mm swivel socket and radio removal tools to replace it.....

Jan 22, 2010 | 1999 Ford Windstar

1 Answer

The heater only blows hot air sometimes


it sounds like a bad blend door motor.these are controlled electrically and not with a cable like older vehicles did.

Oct 27, 2009 | 1999 Ford Windstar

2 Answers

More Air Conditioning issues!!


have 2001 ford windstar front ac blows hot but rear blows cold any idea what problem is and how to fix it?

May 27, 2009 | 2001 Ford Windstar

1 Answer

Heating problem in a 1999 ford windstar


This noise is the blend door electric stepper motor, this motor controls the door inside the heating ducts that diverts air across the heater core to heat the van, either the bleen door is warped from heat and stuck, or the blend door motor is defective, in order to fix this the dash assembly must be pulled to gain access to the motor and the door.

Dec 02, 2008 | 1999 Ford Windstar

5 Answers

1999 Ford Windstar 3.8 no heat


If you have a knock or clicking noise behind the radio, it is the blend motor. The blend door is spring loaded and the gears in the blend motor are "stripped". The door is spring loaded so that the door is closed to the heater core. About 2 hours to replace and a lot of bending and stretching. You don't have to remove the dash, but all of the trim, radio, and controls will need to come out.

Nov 12, 2008 | 1999 Ford Windstar

1 Answer

2003 Ford Explorer is knocking and blowing cold air when I turn the knob to the heat


The blend door (mode door ) is a very common issue there is even an associated TSB t(technical service bulletin) it has to do with the blend door becoming warped and binding the accuator. In an opened or semi-closed position

Oct 20, 2008 | 2003 Ford Explorer

Not finding what you are looking for?
1999 Ford Windstar Logo

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...