Question about 1998 Saturn SL
It is mounted directly to the starter. You have to get under the car to see it.
Posted on Oct 04, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
he starter is underneaththe bottom from drivers side of the car. it will have three wires connected to it and you need do disconnect the pos battery cable before you start to remove the old starter. its pretty simple to find.
Posted on Feb 13, 2009
if by bypass you mean the ignition switch. jump it at the relay, find the starter relay the relay should have a diagram on the side and numbered posts on the bottom with a jumper wire you can jump the post in the power distribution. look at the diagram there should be a switch which shows normally open you need to jump the posts that would close this switch and this will jump you starter make sure you key is on to start the vehicle. hope this helps some
Posted on Feb 14, 2009
Tips for a great answer:
Mar 11, 2017 | Saturn SL2 Cars & Trucks
Dec 12, 2013 | 2001 Saturn SL
CAR STARTER REMOVAL? TESTING
One Wire From Starter Motor Goes To Solenoid And Other Goes
To BATTERY. Starter GETS 12 VOLT SUPPLY FROM BATTERY AND WITH THESE VOLTAGE
IT TURNS THE MOTOR AND THIS TRIGGERS THE STARTER SOLENOID AND YOUR VEHICLE
your help there are few relatively help links showing how to remove and install
starter with proper instructions:-----
help links will help.
the link below:-----
SL2 Starter Wiring Diagram?
details will help.
Nov 28, 2012 | 1999 Dodge Durango
Feb 18, 2010 | 1993 Saturn SC2
Oct 24, 2009 | 1993 Saturn SL2
Feb 13, 2009 | 1998 Saturn SL
320 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: