- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the inner fender will provide a way. I would simply take it to a store and ask them nicely if they will do the install - -many times they will do it and at no charge. - if you must - -carefully pull away the inner fender from under the car - and look for the back of the marker -
DO NOT PRY on the plastic or you will break it and still not be able to change out the bulb.
I have the same vehicle and just went through this. The best way to get to those side marker bulbs is to loosen or remove the front grille. There are several screws to remove this grille. I removed the top screws (hood opened you'll see them) and simply loosened the lower and center section screws. This enables you to pull the grille out far enough from the main headlight area, where you can then access the side marker bulb outlet.
Under the hood on the backside of the light lens there is a ring with a wire in it. You must unscrew the ring and replace the bulb there. Now it will be a little difficult to get your hand in there but this is the only way to replace the bulb.
Open the hood. Observe the area above the right headlamp, close to the fender. You will see a phillips screw that holds a plastic tab. Remove the phillips screw. After removing the screw, pull the marker lamp assembly towards you. It may be real tight, if it has never been removed before. You need to pull the light assembly out of 2 retention sockets behind the marker lamp. Rotate the bulb socket to get to the bulb, replace the bulb, & slide it back in.Easy job.