Question about 1996 GMC Sonoma

Open Question


Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

84 dodge wont charge battery

hook a test lit at the alt big wire this wire must be hot all times and most of the times is protected with a fusible link prone to burn when hooked backward

Dec 22, 2013 | Dodge Cars & Trucks

1 Answer

Transmission Fluid Pressure Sensor/Switch

I had a similar problem in my Mazda truck before. There is a pressure switch on the side of my truck's automatic gear box. The switch is connected to the engine vacuum system. When the switch leaks, the vacuum sucked the transmission oil through the vacuum line to the engine over time. Have you checked your transmission oil level? If the oil level is low, that's probably the reason. I was still able to drive back home by adding sufficient amount of transmission oil.

Good luck.


Aug 07, 2012 | Chrysler PT Cruiser Cars & Trucks

1 Answer

On 3rd alternator ,cant get them to charge the battery and in turn they keep burning out

First have battery checked at shop that knows what they are doing.

Aug 07, 2017 | 1995 Dodge Neon

1 Answer

2 problems. first problem, once the truck is started it won't shift out of park. i have to shut it off and shift into neutral and start it again and then shift into gear. second problem, the truck sounds...

The shifter problem sounds like the shift interlock is not releasing, check to see if your brake lights work, if not probably a fuse or brake light switch. Your misfire could be a bad injector or no compression in cyl 4. You probably had code P0304, which indicated a misfire on #4 not nessessarily a spark issue. Sounds like you covered the spark side of it. Pull the plug and check compression then check to see if the injector is working.

Apr 23, 2010 | 1998 Ford F150 Regular Cab

1 Answer

2005 toyota 4 runner, abs and vsc trac light on... and i cannot shift my gear.

You either have a short some were or a vacum leak you need to, have your truck hooked up to a diagnostic machine to find out what is causing your problem.

Sep 11, 2009 | 2006 Toyota 4Runner

1 Answer

1994 s-10 replaced ignition actuator gear rack

if you goto any auto parts store you can get a repair manual for your vehical. but i think that the neautral safty switch is no hooked up right.

Mar 20, 2009 | 1994 Chevrolet S-10

1 Answer

91 jeep wont start

The neutral safety switch on those (auto trans) are a bit complex and expensive. They can be removed and serviced(other than buying a new or good used one, best to do). To bypass, use the two center contacts in the harness plug, opposite the plug latch. Don't forget though if you leave the toggle on, it will start in any gear!!l Do not leave harness unplugged if bypassed as shift solenoids in trans get their signal through the harness!

Feb 07, 2009 | 1991 Jeep Cherokee Limited

Not finding what you are looking for?
1996 GMC Sonoma Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

75822 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides