Question about 2003 Ford Explorer

1 Answer

How do i fix back disc brakes on a 2003 ford explorer 4x4?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,776 Answers

Visit the autozone.com website and register the vehicle information. It doesn't cost anything and you will gain access to an online repair manual. The information on the braking system should be available for you there. The manual is a very handy resource for anyone doing their own automotive maintenance. Hope this helped and best wishes.

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause the 4x4 high/low lights on the dash not to come on at start up on 2003 ford expedition?


Check all fuses and replace brake light bulbs and clean the socets .
Inspect grounds and wires at conectors . Bulbs at dash also .

Dec 14, 2014 | 2003 Ford Expedition

1 Answer

Trying to find step by step instructions or a diagram on how to replace emergency brake shoes on my 2002 Ford Explorer 4.0L 4x4. This is my first time trying to work on something with rear disc brakes.


I use and I'd recommend you register for free at www.autozone.com Once registered you'll have access to repair and shop manuals for virtually any car or truck. All the data and diagrams you need now or may need in the future will be a couple of mouse clicks away.

Jun 28, 2011 | 2002 Ford Explorer

1 Answer

Is it expensivie to to repair front brakes on 2003 Ford Explorer?


Not if you can do it yourself. The shop would probably charge 150.00 to 400.00 depending if it's 4X4 or if you will need new rotors or not.

Jun 08, 2011 | 2003 Ford Explorer

1 Answer

4 wheel drive is not working on my 2002 ford explorer


2003 ford explorer 4x4 buttons does not work should stay in awd but only pulls at rear tires.. 4x4 buttons not working

Jan 16, 2010 | 2002 Ford Explorer

1 Answer

I have a 2003 ford explorer. I accidently backed


on top of your brake master cylender under the hood (where you put in brake fluid) there is a sensor in the end of it which is for your cruise control. Un-plug the electrical connector and see if you see brake fluid in that sensor -take it to the dealer. This faulty cruise control switch has been the cause of many Fords catching fire. They will fix it for free-it is now a recall. This problem will allow the cruise not to work and an a.b.s. light also. Hope this helps!

Dec 04, 2009 | 2003 Ford Explorer

1 Answer

I have a 93 ford explorer 4x4 automatic. The 4x4 doesn't engage, or does anything when the button is pushed. Is this something simple to fix? Thanks Duane


This will take two persons to do...with a light hammer or mallet, hit the 4x4 motor on the transfer case as another person is pushing the 4x4 high switch,while the vehicle is in neutral and the emergency brake on, AND FOOT ON THE BRAKE.BE CARFUL NOT TO RUN OVER YOUR HELPER!!!! If it starts to work,replace the 4x4 motor. The inside of the motor gets corrodid from water and dirt.

Nov 14, 2009 | 1993 Ford Explorer Limited

1 Answer

My abs light is on my 2003 ford explorer and when


possibility you have worn brake shoe or disc have the check if none of those check abs sensor cable

Jul 01, 2009 | 2003 Ford Explorer

1 Answer

How hard is it to replace front rotors


for the most part you put the car on jackstands on both side and there is two screws on the back of the brake caliper remove them and then you take a little brake fluid out first then you take a-c-clamp and use one of the old pads and the take the c- clamp and close the cylinder on the caliper so you can get your new pads on because they will be thicker and once you have it all back together be sure you add brake fluid back in and put the cap on and pump the brakes to get the pedal back up before you drive the truck and here is a website that may have you truck listed its www.autozone.com and i hope i have been some help to you

Apr 27, 2009 | 2003 Ford Explorer Sport Trac

1 Answer

2003 Ford Explore 4x4 stuck in 4x4 Low


Try backing up in 4x4 then put it in N and shift out of 4x4

Dec 22, 2008 | 2003 Ford Explorer

1 Answer

2002 explorer 4x4WD lights keep flashing is it the module


someone could have pushed the 4x4 low button accidently, it will not engage but the 4x4 will flash up on your dash. just push the 4x4 auto button and it should stop

Nov 11, 2008 | 2003 Ford Explorer

Not finding what you are looking for?
2003 Ford Explorer Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...