Question about 2001 Nissan Pathfinder

1 Answer

Replacing passenger side headlamp? - 2001 Nissan Pathfinder

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 5,763 Answers

Unplug ,untwist cap that holds bulb and wiggle bulb out carefully,( DO NOT TOUCH GLASS OF NEW BULB WILL WEAKIN LIFE OF BULB.)

Posted on Sep 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my Passenger headlamp dim. No other lights affected on right side.


The passenger side is grounding threw the drivers side. When you pull the drivers side light the other looses it ground. It is actually grounded threw the bulb. The reason it is dim. It could be the plug. Find the ground and run a new one to the bulb from the body.

May 20, 2016 | 2006 Pontiac Torrent

1 Answer

Why does passenger side low beam keep burning out?


2002-2003 Altima(L31) headlamp recall - Nissan Forum ' Nissan Forums

forums.nicoclub.com/2002-2003-altima-l31-headlamp-recall-t125981.ht...
Jul 14, 2005 - Owner notification is set to begin August 15th 05. ... I thought I had a bulbburn out, but was able to fix it by making sure the bulb ... I spent about $250.00 a few months ago replacing a headlight bulb! ... I know this is an old post, but my 02altima's passenger headlight keeps burning! it's the 3rd time this year!

Sep 16, 2015 | 2005 Nissan Altima 2.5

1 Answer

Where is the relay for the passenger side headlight on a 2007 Chrysler sebring?


Hi Im AL the owner of Big As Auto Repair

There is no relay for the pass side headlamp. I'm assuming you've already tried replacing the headlamp bulb and it doesn't work. If not, replace it first. For further assistance go to my auto-repair website here:
http://www.bigasautorepair.com/

Jul 03, 2015 | Chrysler Cars & Trucks

1 Answer

2007 Ford Focus front passenger side turn signal blinks fast. Works fine with head lamps off, doesn't work when headlamps are on.


faulty earth wire on the wiring cluster for the heat light check with a meter and fix the earthing point.

Mar 19, 2014 | 2007 Ford Focus (3 Door) Hatchback

1 Answer

Where are the ac recharge ports for a 2005 pontiac grand prix


The high side is located in the engine compartment, passenger side aginst the firewall. The low side is trickier. it is located on the passenger side of the engine compartment in the front by the headlamps. Easiest way to get to it is to have a lift handy. If lift not available be ready to contort your arm up behind the headlamps.

Jul 24, 2012 | 2005 Pontiac Grand Prix

3 Answers

I have a 2006 ford escape and the passenger head light low beam will not work. Tried replacing the bulb, and check fuses nothing is working.. what else can I try?


Both your low beam and your high beam is protected by the same fuse, so it makes sense that the fuse is OK if the high beam is working on the passenger side. There are 3 fuses for the headlamps. Fuse #13 in the Battery Junction Box (20 Amp). If this fuse is blown, the headlamp relay will not have any power and neither high nor low beam on either side will work (you will have no headlamps at all) Then there is Fuses #2 and #3 (15 Amp) in the Battery Junction Box. #2 goes to the left low and high beam and #3 goes to the right low and high beam.
The headlamp switch uses a SINGLE CIRCUIT to control BOTH sides at the same time, so if one side works, the switch cannot be the problem. The headlamp relay provides power for fuses #2 and #3 and we already ascertained that these fuses must have power since we have working lights on both sides, so the relay cannot be the problem. A replacement bulb has already been tried, so that pretty much leaves us with a bad lamp socket. (Most likely cause) or a bad connection at splice #S122, which is located in the main wiring harness near the breakout for the left headlamp. (RED/BLACK wire)

May 16, 2011 | 2003 Ford Escape

1 Answer

Replacing the bulb in headlamp of 2005 vw super beetle convertible. solution please. need process steps


I used this link to replace my two headlights. The passenger side is easier than the drivers side. :) Here's a link to the blog I used, there are step by step instructions and pictures.

http://www.cindyli.com/index.php/site/comments/vw_beetle_headlight_replacement/

Apr 27, 2009 | 2005 Volkswagen New Beetle

1 Answer

Passenger headlight don't work 2003 lincoln navagator


high beam or low beam? or both of them on one side.

  • One low beam headlamp is inoperative
  • Central junction box (CJB) fuse 23 (10A) (RH headlamp).
  • CJB fuse 25 (10A) (LH headlamp).
  • Circuitry.
  • CJB.
  • Go To Pinpoint Test C .


  • One high beam headlamp is inoperative
  • Circuitry.
  • Headlamp assembly.
  • Go To Pinpoint Test D .

  • The high and low beam headlamp is inoperative on one side
  • Circuitry.
  • REPAIR ground circuit 57 (BK).


  • Headlamp switch
  • Multifunction switch
  • Vehicle Security Module
  • Central junction box (CJB) fuse(s):
    • 17 (15A)
    • 23 (10A)
    • 25 (10A)
    • 35 (20A)
    • 40 (20A)
  • Circuitry
  • Headlamp bulbs
  • Daytime running lamp (DRL) relay



Apr 19, 2009 | 2003 Lincoln Navigator

1 Answer

2005 pacifica w/ HID headlamps driver side doesnt work


From LustyKid.

Check the connector wire for continuity on the low end side with a good OHM meter. You probably have a broken wire connection but can't see it due to insulation. See if you have voltage on the low end side of the plug. No voltage, no light. Probe the wire and find where the current stops. Also make sure you don't have the ground reverse on the plug to the headlight. Before replacing it of course. Or you can cut all the wires and replace with a new connector.

Dec 14, 2008 | 2004 Chrysler Pacifica

1 Answer

Instructions on replacing headlight assembly


96 f150 procedure

Headlamp Assembly Removal
  1. Remove radiator air deflector from radiator support.
  1. Remove two screws and two nuts retaining headlamp door (13064).
  1. Pull headlamp door from vehicle. Remove three bulbs and sockets.
  1. Disconnect engine control sensor wiring (12A581) from headlamp bulb (13007).
  1. Remove two retainers attaching upper two attachments of headlamp (13008).
  1. Turn horizontal headlamp adjusting screw (13032) completely out of the adjusting nut.
  1. Pull headlamp from vehicle.

Oct 17, 2008 | 1994 Ford F150 Styleside Supercab

Not finding what you are looking for?
2001 Nissan Pathfinder Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...