Question about 1994 Geo Metro

2 Answers

How do you change the timing belt on a Geo Metro?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 427 Answers

If you have to ask, you need to obtain a repair manual for your car, or head down to your nearest public library and they will likely have manuals that you can look at.
Don't mickey mouse anything here, the slightest mistake can cause serious and costly engine damage. Read a repair manual before you try this. G/L

Posted on Oct 02, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Geo Master
  • 5,763 Answers

If i were you i would buy a repair manual for your car, to change timing belt, i would also replace waterpump while your at it.

Posted on Sep 30, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

chiquititas
  • 1010 Answers

SOURCE: Can Geo Metro parts be used to fix a Chevrolet Metro?

yes it will if the year model and body style are the same and it dose not have to be the exact same year model i would find out which years fit your sisters car you can call most good body shops and they can tell you or call you local Chevy dealer to find out what years will fit

Posted on May 15, 2008

  • 58 Answers

SOURCE: geo metro timing diagram

woot i feel your pain i had the same problem. go to autozone.com and go to thier vehicle repair.
enter your year make and model and find it. but please hear me on this one.. be carfule thier are like 2 timing references and one timing mark. USE THE DOT. pls i learned the hard way. lol use the dot on the cam sproket. good luck

Posted on Jan 29, 2009

  • 1757 Answers

SOURCE: looking for timing belt diagram on 97 Geo Tracker

Click on the following free, direct Link. It has the Timing Belt Diagrams, including Marks and Instructional Diagrams.

Let me know if this helped...

http://www.2carpros.com/car_repair_information/year/1997/make/geo/model/tracker/1997_geo_tracker_timing_belt_diagram_marks.htm

Posted on Apr 08, 2010

captaynkyrk
  • 170 Answers

SOURCE: how to change water pump in 1996 geo metro?

I've found the Haynes Repair Manual that you can get at Auto Zone to be the best one there is. They have step by step instructions with pictures on repairing or replacing just about anything on your auto. You can get them for around $20 - 25. Is yours a 3 or 4 cylinder? Auto Zone has a new service where you can actually look up repair instructions for your vehicle with pictures. Here's the instructions for a 3 cylinder for your year, make and model:

  1. Disconnect the negative battery cable.
  2. Drain the cooling system.
CAUTIONWhen draining the coolant, keep in mind that cats and dogs are attracted by the ethylene glycol antifreeze, and are quite likely to drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantity. Always drain the coolant into a sealable container. Coolant should be reused unless it is contaminated or several years old.
  1. Remove the air cleaner assembly.
  2. Loosen but do not remove the four coolant pump pulley bolts.
  3. Raise and support the vehicle safely.
  4. Remove the lower splash shield.
  5. Remove the air conditioner compressor drive belt.
  6. Remove the lower alternator cover plate bolts, loosen the alternator adjusting bolt and remove the drive belt.
  7. Remove the crankshaft pulley.
  8. Remove the coolant pump pulley.
  9. Remove the timing belt.
  10. Remove the oil level dipstick and guide tube.
  11. Remove the alternator adjusting bracket from the water pump.
  12. Remove the water pump rubber seals.
  13. Remove the water pump mounting bolts and nuts. Remove the water pump from the vehicle.
To install:
  1. Clean the gasket mating surfaces thoroughly.
  2. Check the water pump by hand for smooth operation. If the pump does not operate smoothly or is noisy, replace it.
  3. Install the pump using a new gasket. Tighten bolts to 115 inch lbs.. (13 Nm).
  4. Install new rubber seals.
  5. Install the upper alternator adjusting bracket and tighten bolt to 17 ft. lbs.. (23 Nm).
  6. Install the oil level dipstick and guide tube.
  7. Install the timing belt.
  8. Install the water pump pulley and leave the bolts hand tight.
  9. Install the crankshaft pulley.
  10. Install the water pump/alternator drive belt.
  11. Install the lower alternator cover plate and tighten bolts to 89 inch lbs.. (10 Nm).
  12. Install the air conditioner compressor drive belt by releasing the tensioner pulley and installing belt.
  13. Install the lower splash shield and lower vehicle.
  14. Tighten water pump pulley mounting bolts to 18 ft. lbs.. (24 Nm).
  15. Adjust the water pump drive belt tension and tighten alternator adjustment bolt to 17 ft. lbs.. (23 Nm).
  16. Install the air cleaner assembly.
  17. Refill the cooling system.
  18. Connect the negative battery cable.
  19. Start the engine and allow it to reach operating temperature. Check for leaks and refill cooling system as necessary.

Posted on Jul 18, 2008

mickha2
  • 145 Answers

SOURCE: how to replace timing belt on 3 cyl geo metro

remove accesory belts remove carank pulley remove t belt covers
set cyl 1 TDC change belt

Posted on Aug 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change a 1.0 front crank seal on geo metro


same as all G engines.
at timing belt change time, every 60k miles
and is same chapter in the book.
alldata.com covers the 1L engine, G10.

if you buy the GATE belt, the instructions are in the box.
first google hit on G10 is.

http://www.teamswift.net/viewtopic.php?t=26588

Jul 11, 2014 | 1991 Geo Metro

1 Answer

I have 96 geo metro drove 15 miles and just died on me... Will not,start replaced dist. And dist cap and button,coil is getting power fuel is gettin to plugs, tried starter fluid but still nothin, fire is...


Depending on mileage, Geo's have timing belt and it should be changed every 60k, if you've done all that's mentioned I suspect timing belt is broken.

Mar 24, 2011 | 1996 Geo Metro

1 Answer

How to replace timing belt on 3 cyl geo metro


remove accesory belts remove carank pulley remove t belt covers
set cyl 1 TDC change belt

Apr 24, 2010 | 1995 Geo Metro

2 Answers

I have a 1992 geo metro. I replaced the timing


you need to check the timing belt tensioner,sounds like it is going bad.also check that you dont over tighten the belt

Mar 26, 2010 | 1992 Geo Metro

1 Answer

How do I set the timing belt on a 93 geo metro without breaking the belt?


Please go to Auto Zone and ask for a Timing Belt Diagram

Jun 13, 2009 | 1993 Geo Metro

1 Answer

To chage the bel on the geo metro


Serpentine belt is one belt that drives all except for the timing.
The timing belt maintians the timimg of the crank shaft and the cam shaft in sink.
A/C is seperate from all

Apr 17, 2009 | 1994 Geo Metro

1 Answer

Replacing broken timing belt on 92 GEO


a repair manual will show you the specs you need

Dec 06, 2008 | 1994 Geo Metro

1 Answer

95 Geo metro will not crank no fire


take your timing cover off have a friend look to see if the belt is moving while you crank the engine i would say that the belt is broken

Oct 22, 2008 | 1995 Geo Metro

Not finding what you are looking for?
1994 Geo Metro Logo

684 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Mike Gilbreath

Level 1 Expert

50 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...