Question about 1993 Ford Ranger SuperCab

2 Answers

Ford Ranger will not start

Replaced fuel pump in ford ranger and the truck will not turn over to start. Could the control ignition module cause this problem or could it be something else

Posted by on

  • Pimpinaudio May 11, 2010

    can you hear the fuel pump running when ignition set to "ON" position befor starting?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Common problem with the Ranger, the hot wire breaks right at the ignition key switch. The solution is to replace the wiring harness (not the "entire" vehicle wiring harness, just the wiring harness inside the steering column). Its a pain .. takes over an hour, but solves the problem.

Posted on Jul 13, 2013

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Does the car click when you turn the ignition? If it does, it is probably your starter. If the engine does not turn when you turn the ignition.

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 Ford ranger XLT 2.3 won't stat relaxed many parts what could problem?


engine module ????? EEC - engine control module ? Or the ignition control module ? Learning how to test electronic system an not replacing parts is the way to find the problem .
ScannerDanner gets his but kicked by an 88 150 EEC IV Ignition

Apr 23, 2017 | Ford Cars & Trucks

1 Answer

1006 ford ranger ignition cotrol module location


Your ranger doesn't have a ICM - ignition control module . PCM - engine computer controls spark .

Jan 16, 2017 | Ford Ranger Cars & Trucks

1 Answer

Both coils do not fire on 1 and 4. Will start but only running on 2 cylinders. Could both coils be bad or should I look elsewhere?


Part 3 -How to Test the Ignition Module and Crank Sensor ...

easyautodiagnostics.com > Ford > 2.3L
Mar 1, 2012 - Spark plugs for cylinders #2 and #3 get spark at the exact same time. ...voltage -12 Volts) to both individual ignition coils within the coil pack. ... Ford Mustang or Ranger (or 2.3L Mazda B2300), this is what you'll need ... for this 'Switching Signal' at the coil pack... but you can also test this ... 1991, 1992, 1993.

How to Diagnose a Misfiring Cylinder (2.3L Ford Ranger ...

troubleshootmyvehicle.com > Ford > 2.3L
Apr 3, 2012 - Bad Fuel Injectors can cause a Misfire Condition. ... the ignition system on the 2.3L Ford Mustang or Ranger consists of 2 ignition coil packs, ...

2002 ranger misfire rough idle - Discussion on Topix

www.topix.com > Ford Ranger
Jul 27, 2007 - My truck is giving the code misfire in number 4 cyl. I replaced my spark plugs, Wires, Coil packs (both of them) and all my fuil ... three (3.0L v6) go bad, the fuel/air mixture gets messed up. Judged: 2. 2 ... My truck runs rough only at idle. ...code for ford ranger 2002, 2.3 5speed. truck runs like a champ but that ...

Extremely stumped! I need the best and brightest 1994 Ford ...

answers.edmunds.com > Edmunds Answers

Jan 31, 2016 | Cars & Trucks

3 Answers

Does an ignition control module have anything to do with fuel pump functioning?


1987 rangers use a device called a TFI module to control ign. timing , this merely triggers a std. coil to fire the center port of distributor cap , this device only controls the coil to fire but does send a pulse for timing back to ecu this sets the base pulse for fuel injection , but its also affected by manifold Air flow and exhaust O2 amounts (closed loop) , but engine should run in base mode (open loop) fuel timing (but not well) , fuel pump relay is enabled to run via ECU output , Now your year ranger had a tech bulletin out on fuel pumps , seems they had a problem getting them to work after a fuel filter was replaced , something about a false backpressure , no if you have no/low fuel pressure then id look at fuel pump power 1st then fuel pump itself assuming you've already tried a new filter of course

Jun 14, 2015 | 1987 Ford Ranger

2 Answers

I have a 83 ford ranger. it will turn over but it wont start.


possibly the ignition control module.some are a box on the firewall. mine is located on the back of the distributor. typical for no spark on fords both times i had this problem that was the fix

Jul 13, 2012 | 1983 Ford Ranger

1 Answer

1988 ford ranger no spark


Did you replace the ignition control module, it is called the "TFI"? That is the most common source of a no start. There is also a problem with the ignition starter switches coming apart and causes a loss of power to the ignition system.

Jan 25, 2012 | 1988 Ford Ranger

1 Answer

I HAVE A 1993 FORD RANGER 3.0 V6 ENGINE AND NEED


For 1993 Ford Truck Ranger 4WD 3.0L MFI 6cyl the Control Module-Ignition is located under hood, center, rear engine area, mounted on distributor.

f2a2c92.jpg

Fig. 1: View of the remote mounted Ignition Control Module (ICM)

Hope this help (remember comment and rated this).

Jul 27, 2010 | 1993 Ford Ranger SuperCab

1 Answer

1994 ford ranger 2.3litter timming belt broke replaced it know i have no spark and no fuel pump does the crank sensor do that


Yes, if the ignition module doesn't receive the signal from the crank sensor it won't send fire to the coils or the signal to the ecm to run the fuel pump.

Apr 22, 2010 | 1994 Ford Ranger Supercab

1 Answer

I have replaced fuel pump and now have fuel getting to engine now i have no spark, engine will not start


The most common cause of no spark on 86 through 90 ranger V-6 is a bad ignition module. They aren't too hard to replace, but you need a special tool. The module is located on the distributor stem at the back of the engine. Its held on by two small screws that need to be taken off with a special tool. It can be bought at Advanced Auto for about $5, just called "Ford ignition module tool". If you have small enough hands you can probably even get the module replaced without taking the distributor out.

Oct 04, 2009 | 1988 Ford Ranger

Not finding what you are looking for?
1993 Ford Ranger SuperCab Logo

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...