Question about 1995 Dodge Ram

1 Answer

How to fix reverse lights on a 2002 1500 4x4 dodge v8 tried bulbs and fuses wat next...?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 190 Answers

There should be a switch on the trans that may have a bad connection or has gone bad. I am guessing your trans (like most) is an automatic.
I see yours is a 4x4. If you have been working on the rig or been out off road, then you may have clipped or bumped a connection.

I'm not sure on this year but it may be a part of the Neutral Safety Switch.

Hope this helps...

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix a fuse that pops ever time I pull the light switch? 96 dodge Dakota no tail lights no side markers no license plate lightship. Has head lights turn signals brake lights reverse.


Sounds like you have a short that is going to ground. You can put a fuse in and have someone watch the rear lamps when you pull the light switch on. You can also check the bulb sockets by removing the bulbs. You could try a 5 amp heavier fuse (be careful only for a few seconds). Check the wiring for a weak spot as well. Try another light switch. I hope this helps.

Jul 11, 2015 | 1996 Dodge Dakota

1 Answer

Reverse lights dodge ram


p1652 this code is for engine ecu for light code start B -XXXX BCM body control module for your light check wiring or check bulb and bulb make match to the vehicle

Apr 13, 2014 | 2005 Dodge Ram 2500 Truck

1 Answer

Hi I have a 1991 Dodge Dakota 2 Door 2WD V8 Auto Trans. I do not have any backup lights. So far I have checked the backup bulbs, the fuse at the dash, the neutral start/backup light switch at the...


sounds like you've been really trying, you say there is no power at the light bulb socket and you checked your switch at the transmission. did you check for power at the transmission. this will tell you if the problem is at the front of the truck or in the rear.

Dec 13, 2010 | 1991 Dodge Dakota

1 Answer

Why wont my reverse lights stay on if they work?


Hello,

if your reverse light don't stay on, first check the bulb.

If the bulb is okay, check the reverse light wire and make sure its intact.

Lastly, check your fuse box. You should find your fuse box under your steering and or inside the bonnet. Check if the fuse has blown.

Good luck.

Nov 26, 2010 | 1987 Dodge Aries

1 Answer

How to fix 2002 dodge 4x4 standard regular cab st


seriously, it has to be the switch on the trans unless somebody was playing w/ the vehicle wiring recently. if you want to test it, unplug it and jump both sides of the wired connector w/ a paper clip. if the lights come on now (with ign.key ON) then the switch is bad

Sep 30, 2009 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

Backup lights don't work Bulbs are fine and fuse is fine


check the reverse switch as it's most likely failed. It'll be on the side of your transmission with several wires sticking out of it

Sep 21, 2009 | 1993 Dodge Spirit

2 Answers

1993 Dodge Shadow...left turn signal won't flash


If the fuses are good and the front and rear bulbs are good, change the flasher for the turn signals, even tho the right is working. If that doesn't fix the problem, it might be in the turn sgnal switch on the steering column.
If both bulbs are good for the backup lights and fuses are good, then the backup light switch, which is screwed into the side of the transmission has to bad.

Apr 12, 2009 | 1993 Dodge Shadow

2 Answers

Fuse blows when shift in reverse


Am I correct, the turn signal fuse is blowing when you put the manual shifter in reverse?
Let me know.
Regards

Mar 26, 2009 | 1999 Chevrolet Tracker

1 Answer

Brake lights dont work


What happens when you run a jumper wire from another fuse cavity, directly to brake switch?

Oct 15, 2008 | 1991 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...