Question about 2003 Buick Rendezvous

1 Answer

I dont know what tools i have to use to get the door panel off

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

You only need a screwdriver (most likely Philips)

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls.

Posted on Sep 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the driver side door panel on a 1986 pontiac parisienne broughham


You need special tools to remove the door panel without permanently damaging the panel. you can get them at any auto parts store. The armrest has screws that have to be removed. Pull up on the panel with all the buttons on it while prying on it with a flat blade screw driver. You'll find more screws to take out there. Now for the special tools. Use them to locate and to pry up on the door panel. the tool releases the metal or plastic fasteners without ruining the door panel.

Jul 28, 2016 | Pontiac Parisienne Cars & Trucks

1 Answer

How do I remove the rear door panel on my 2000 YUKON?


It takes a special tool. DONT pry on it or the clips will break. Check Ebay for YUKON Door Panel Removal tool or check Auto Zone to buy one.

Jul 10, 2015 | Cars & Trucks

1 Answer

Bmw 6 series doors are closed and latch is stuck


Buy something called a z-tool or call AAA and have them open the door for you.. A z tool took the place of a slim jim. It will not damage your car though...

Jan 25, 2014 | 2005 BMW 6 Series

1 Answer

Chevy door panel remove


Many door panels are held on by nylon snap-in-place 'doohickeys'. It takes a bit of prying, and I usually start along the bottom of the door. Once you get started it gets easier. Special (inexpensive) pry tools are available in automotive supply shops, or even Harbor Freight. These afore-mentioned doohickeys do have a habit of breaking from time to time, but again replacements can be purchased at O'Reilly's, AutoZone, etc.

Jan 22, 2014 | 2002 Oldsmobile Bravada

1 Answer

How do i take off de door panel of 2001 dodge intrepid


PHILLIPS SCREW DRIVER AND A DOOR PANEL REMOVER TOOL WORKS BEST,ONCE YOU REMOVE ALL SCREWS YOU CAN SEE I BELIEVE THE ARE SOME HIDDEN BEHIND THE SPEAKER GRILL ,TAKE THAT OFF AND THEIR SHOULD BE AT LEAST 3 AROUND THE SPEAKER AREA.ALOT OF PEOPLE DONT SEE THOSE.THEN GET THE DOOR PANEL TOOL PUT UNDER THE DOOR PANEL AND PRY IT TO YOU, MAY HAVE TO USE SOME FORCE THEIR PLASTIC SNAPS. THIER ALL AROUND THE DOOR.....HOPE THIS HELPS

Aug 04, 2011 | 2001 Dodge Intrepid

1 Answer

Drivers side window seems to be off track and i dont know how to get into the door to repair it.


You would need to remove the door panel to access your window track. There are plastic expansion pins which hold the door panel in place. There is a tool specifically designed for this it looks like a screwdriver with a v center, slide this tool under the pin and push down on the handle and it will pop the pins out. You may need to unhook or remove your master control unit that operates your power doors/window etc in order to have enough room to access window track. There are little cheap crappy plastic guides which hold the window in place which break quite frequently you can get those from the dealer cheap (they are always in stock). Remove those guides and install the new ones and you'll be good to go

Feb 02, 2011 | 1996 Ford Explorer

1 Answer

Describe how to replace 2002 driver side mirror


remove the left door panel screws by inside handle and remove the 2 big screws in the arm rest may have some covers on it then with the panel clip tool or screw driver you need to hit the inside top of the panel as you lift up with you hand dont break the panel. carefully remove the door panel clips to release the panel. remove the screws inside the door at the mirror unplug the connector have someone hold the mirror so you dont scratch the car. then pull it loose and reverse the prosess.

Dec 11, 2010 | 2002 Oldsmobile Bravada

1 Answer

Passenger door removal for radio speaker access.


YOU NEED A DOOR PANEL FLAT TOOL AND WINDOW CRANK CLIP TOOL IF YOU DONT HAVE POWER WINDOWS. A HAYNES REPAIR MANUAL TO SHOW YOU HOW TO REMOVE DOOR PANEL.

Apr 04, 2010 | 2007 Chevrolet Cobalt Coupe

1 Answer

Yea i dont know how to take off my door panels in my 2000 sunfire it dont have power windows


There are spring clips behind the handle that require a special tool to remove.
It slips between the door panel and handle to remove the clip.

Looks like this...

7c0dfc5.gif

Any autoparts store carries this for about $5

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Nov 03, 2009 | Pontiac Sunfire Cars & Trucks

2 Answers

How do you remove the side mirrors on a 1995 Dodge Stratus


Start by taking off the inside door panel. Screws are located:
Inside the door release handle under the small plastic panel
Inside the door recessed handle under the small plastic panel
Under the speaker grill you will find three screws
On the inside rim closest to the hinge.
I believe that is all the screws, but check again.
Then there is the plastic retainers. They go around the lower perimeter of the door panel. Use a flat head screw driver or panel removal tool. The panel will be held on by the window wipe, push up on the panel. The door release bar is removed by pushing the retainer to the side and pushing the bar out. Remove all the wire connectors from the panel (mirror, lock, speaker, window.) Panel is now off.

There is a wing panel held on by two screws. underneath there may or may not be body plugs. Remove Them. There are three nuts that hold on the mirror. I believe they are 8mm deep well. Push the wire through the membrane.

Reverse to replace.

Feb 21, 2009 | 1995 Dodge Stratus

Not finding what you are looking for?
2003 Buick Rendezvous Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...