Question about 1996 Toyota 4Runner
You will need to chisel the bolts off as they are security snap bolts
Posted on Mar 02, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Removal of the ignition Barrek
HAVE YOU TRIED TO USE SOME SILICONE SPRAY ON THE NUT? MAYBE YOU CAN CUT THE NUT OFF WITH A DREMEL AND A VERY SMALL DIAMOND BIT WITHOUT CUTTING THE DASH. HOPE THIS HELPS. LET ME KNOW. GOOD LUCK
Posted on May 03, 2009
it is better to buy a new ignition barrel.it takes a special socket to get the screws out, once the screws are out they do not need to be replaced.buy new barrel,disconnect negative battery cable,disconnect wires from barrel assembly, remove barrel from colum. first take vin# to dealership parts department to get correct barrel assembly, the keys with new assembly will fit doors and trunk
Posted on May 20, 2009
If you have the 3.4 V6 engine yes you have a timing belt and you shouild change it every 90 thousand miles if you have the 4 cylinder engine no you do not it is chain driven
Posted on May 29, 2009
SOURCE: mercedez 190 ignition barrel. I have taken out ignition barrel attached to steering coloum but i can not remove key ignition from steering coloum how does it remove ignition barrel from steering
Should be the same as w123 model. Check diy Mercedes web page.
Photos included easy to do.
Posted on Jul 07, 2009
Remove the plastic covers around the ignition switch, insert the key in the ignition and turn the key to ignition on position (just before start position) now locate the pin on the side of the ignition switch which is flush with the aluminium housing holding the barrel,the pin is about 3 mm in diameter.Gently press the pin inwards (which is spring loaded) with a sharp pointed object e.g small screwdriver and at the same time while holding the pin, pull on the ignition key as if you want to remove the key, and the barrel will slide out completely.
Posted on Sep 18, 2009
Tips for a great answer:
Dec 06, 2016 | Toyota Hilux Cars & Trucks
Dec 16, 2013 | 1996 Toyota 4Runner
Jan 15, 2013 | Cars & Trucks
Oct 15, 2012 | Toyota Hilux Cars & Trucks
Mar 09, 2012 | 1996 Toyota Corolla
Jun 12, 2010 | 1986 Toyota Corolla 2 Door
Sep 17, 2009 | 1998 Toyota Celica
Aug 04, 2009 | 1996 Toyota RAV4
Jun 09, 2009 | 1994 Toyota Pickup
683 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: