Question about 2002 Ford Mustang

1 Answer

P0316 scan code come up on my 2002 mustang 3.8

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,049 Answers

The Ford troubleshoot code P0316 = Engine Misfire Detected on Startup (First 1000 Revolutions)

Check for moisture under a coil. It seems to be a somewhat common problem.

Posted on Sep 30, 2009

  • royh49 Feb 23, 2011

    replaceing the coil fix the code p0316 thanks.

  • pblack3
    pblack3 Jan 03, 2012

    Exact same code on my 20 V6 Mustang, replaced the coil and it fixed my misfire and the P0316 code .. Thanks for posting ;)

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Misfiring


code p0303 refers to cyl 3 misfire detected ===causes engine mechanical fault--wiring--ignition/fuel system--injector--ECT/MAF sensor--ECM
code p0316 refers to misfire detected during start up --first 1000 revs===causes --engine mechanical fault--wiring--ignition/furl system--injector
the common fault cause is ignition/ fuel system and injectors so I would be checking fuel pressure and injector systems for clean and wiring connections are good especially on no 3 injector.

Apr 19, 2014 | Mazda 626 Cars & Trucks

1 Answer

My car is cutting off every time im going under 1000rpm. mercury sable 2002. codes were p0301 p0302 and p0316 until i changed crank sensor and spark plugs now it says p0316 p0305 p0306.. whats going on?...


Hi

P0305 is misfire in cylinder #5.
P0306 is misfire in cylinder#6.
P0316 is misfire on start up.
Have the plugs on those 2 cylinders, and the 2 fuel injectors checked, also check for spark from the coil on those 2 plug wires.

Please get back to us if you have further query or else please accept the solution.

Thanks for contacting fixya.com



Sep 05, 2011 | 2002 Mercury Sable

3 Answers

Hello my mustang is sputtering badly, idles at between 900 and 1000 rpm. has a bad exhaust smell and acts like it wants to stall alot. the oem codes it gave were po303 and po316. what does this mean and...


303= cylinder #3 misfire the 316 is just another code for misfire detected during start up:
I would say buy a new plugs and wires, this will correct the problem, Tim

  • Faulty spark plug or wire
  • Faulty coil (pack)
  • Faulty oxygen sensor(s)
  • Faulty fuel injector
  • Burned exhaust valve
  • Faulty catalytic converter(s)
  • Running out of fuel
  • Poor compression
  • Defective computer

Apr 25, 2011 | 2002 Ford Mustang

3 Answers

P0303, P0316


You have a misfire on #3 for code p0303 & misfire for code p0316

Apr 20, 2011 | 2002 Ford Taurus

1 Answer

Have misfire, code P0316, any ideals? 86,000 miles on


2004 Marauder and 2003-2004 Mustang vehicles built before 12/19/2004 equipped with 4.6L 4V/5.4 4V engine may exhibit a runs rough, lacks power, and engine misfire, prompted by a MIL light and DTC codes P0301, P0302, P0303, P0304, P0305, P0306, P0307, P0308, and P0316.
ACTION
Diagnose engine for engine misfire concern. If diagnostics determine an engine misfire which is characterized by leakage through exhaust valve(s), only replace the affected cylinder head(s).
SERVICE PROCEDURE FOR VEHICLES WITH RUNS ROUGH/MISFIRE CONDITION:
1. Perform relative compression check on all cylinders. If abnormal, check cylinder leakage and actual compression for "low" cylinders refer to Workshop Manual (WSM), Section 303-00.
2. If leakage/compression check indicates a valve train concern, per valve train diagnostics in WSM, Section 303-00, replace cylinder head and cam assembly, pipe plugs and timing chain tensioner, per procedure outlined in WSM, Section 303-01.
3. If cylinder leakage and compression tests are inconclusive, perform misfire diagnostic, per TSB 05-22-8.

So

Feb 26, 2011 | 2004 Ford Freestar

1 Answer

2002 ford f150 xl 4.6 litre code p0316


Do you have another code in addition to this ?
The P0316 DTC is Misfire Detected On Startup (First 1000 Revolutions), which usually has another code set in addition to the P0316 code.

Nov 15, 2010 | 2002 Ford F150 Regular Cab

2 Answers

What is code p0316 & p0302 on my ford sable


P0302 IS MISFIRE ON# 2 CYLINDER P0316 I THINK IS KNOCK SENSOR BUT IM OLNY 90% ON THAT

Oct 15, 2010 | 2002 Mercury Sable

1 Answer

Engine lite on code p0316 &p0301


p0316
misfire detected during startup-first 1000 revolutions

p0301
cylinder no.1 misfire detected

Aug 23, 2010 | 2002 Ford Taurus

2 Answers

Dtc code p0316 on 2002 ford taurus


Code P0316 means 'misfire detected first 1000 revs.'

Feb 18, 2010 | 2002 Ford Taurus

Not finding what you are looking for?
2002 Ford Mustang Logo

Related Topics:

2,804 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...