Question about 2004 Lincoln Navigator

1 Answer

I recently had a flat tire on the driver's front and we did not turn off the suspension swithch before we jacked it up. Now the passenger's front side is very low and the check air suspension light has come on all of a sudden. The flat tire happened a week ago.What could be the problem?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 5,546 Answers

You may have bent a sensor. The 4 corners of your car each have an adjustible sensor. They can be adjusted, but it should be on an alignment rack or collision body repair floor.

You car may be electrically confused and the sensor is now taking the jacked position as its base setting.
Try disconnecting the negative battery cable for 10 minutes and see if the computer resets itself. Reattach cable and see what happens.

Posted on Oct 02, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Ford explorer eddie bauer 1998 front passenger tire bald in one spot what causes it


Doreen, the radial belt has become faulty, replace tire immediately.

Mar 07, 2016 | 1998 Ford Explorer

1 Answer

1998 dodge durango loud thumping noise front passenger tire looks crooked


A suspension part has come loose or is worn out. Check the top strut mounts under the hood. There may be a rubber plug to remove to see the top mounting plate. The three nuts around the perimeter of the strut plate are the mounting nuts, not the larger center nut-leave that one alone-it is for keeping the strut from coming apart.
If that mount is good, check for a broken coil spring around the strut.
Keep looking for the problem. If the tire leans out that bad, you should be able to spot the problem. Raise the wheel off the ground (recommend jack stands or blocks so it won't slip off the jack), grasp the wheel and shake it back and forth while watching for looseness or noise on the suspension parts connecting to the wheel hub at top and bottom- the upper and lower control arms and the strut connection.
Good luck.

Dec 31, 2012 | Cars & Trucks

1 Answer

I NEED THE STEPS OF TAKING OUT A TRANSMISSION OUT OF MY 1994 HONDA ACCORD


  1. Remove the hub cap and bolt the wheel back in.
  2. Punch out the spindle nut lock and loosen the spindle nut.
  3. Raise and support the vehicle and block the rear tires.
  4. Remove the wheel.
  5. Drain the transmission.
  6. Remove the all the damper fork nuts and all the brake hose nuts on the damper fork and on the shock absorber.
  7. Remove the damper fork.
  8. Remove the driver side and passenger side front suspension flange nut inside the engine bay and slide the upper arm out
  9. Turn the steering wheel all the way to the passenger side and remove the passenger drive shaft spline from the hub.
  10. Separate the inner driveshaft from the transmission with a large screw driver (or crow bar).
  11. Remove the passenger side drive shaft. Do not pull.
  12. Remove the front radius rod.

Under the car.

  1. Remove the center beam.
  2. Remove the torque converter cover, the control cable holder and remove shift control cable.
  3. Remove the drive plate bolts and four transmission housing bolts.

Inside the engine bay.

  1. Place a transmission jack or several small jacks under the transmission.
  2. Disconnect all the electrical connectors.
  3. Remove the speed sensor gear shaft but leave the hoses on.
  4. Remove the distributor and mark the distributor shaft with a razor or a diamond etcher, usually on the head side or both.
  5. Remove the throttle control lever cable.
  6. Remove the transmission cooler hoses mounting bolts and their 4 washers.
  7. Remove the starter.
  8. Remove the all the transmission housing bolts.
  9. If the transmission won't come out remove a horizontal side engine mounting bolt and raise oil pan (with a wooden block between the oil pan and jack) until the transmission clears.
  10. Lower the transmission into the transmission jack.
  11. With the driver side front suspension flange out of the way, turn the steering towards the right then remove the driver side inner drive shaft with a large flathead screw driver.
  12. Lower the low profile transmission jack and slide the transmission and the jack from under the car. Don't loose the two dowel pins.
  13. Block all transmission fluid ports from leakage and dust and dirt.
  14. If repairs are being done repair the transmission in a dust, sand free environment.

Jul 30, 2011 | Honda Accord Cars & Trucks

1 Answer

How do i rotate tires on a 2008 saturn outlook


you lift the car up on jacks so that the tires are off the ground, then you put jack stands in placement. then you loosen ONLY THE BOLTS ON THE TIRE IN THE AIR remove the tire let the car down on to the jack stands, and move the jack to the next and do the same what you do is take the passenger side back tire and switch it with the drivers side front tire. then you take the drivers side back tire and switch it with the passenger side front tire. make sure the bolts are tight as you can get them then you are done. i hope this information helps. Be careful and drive safe!

Feb 27, 2011 | Saturn Outlook Cars & Trucks

1 Answer

Where do you place the jack when changing a front tire on a 2001 ford excursion


First step. be sure that the vehicle is on a level surface with the transmission in Park and parking brake set. Chock the wheels if possible.
For a 4 Wheel Drive (4WD), a flat on passenger's side, position the jack so that it cradles the front axle. For a flat on the driver's side, position the jack so that it fits into the notched area of the 4WD differential. For a 2 Wheel Drive, position the jack so that the jack cradles the large pin that protrudes out of the cross-member to the front of car. Hopefully, this will FixYa problem!

Oct 18, 2009 | 2001 Ford Excursion

1 Answer

Its a air suspension comprssor for a 93 lincoln mark 8 were on the car is it located


The air suspension compressor is located on the passenger side of the car in front of the tire. To get to it, you must first lift the front tires off of the ground, remove the front passenger tire, and then remove the plastic skirt found behind the tire. After this is done it is easy to see the compressor which is found towards the front of the car, mounted just behind the skirt. I hope this helps

Aug 11, 2009 | 1998 Lincoln Mark VIII

3 Answers

How to replace front cv shafts on a 1997 isuzu rodeo ?


Remove tire, remove axle nut, pop ball joint off, remove clip, pull axle

For a more detailed instructions, go to autozone.com and register for free.
Now you will have full free online repair manual

Aug 01, 2009 | 1997 Isuzu Rodeo

Not finding what you are looking for?
2004 Lincoln Navigator Logo

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...