Question about 1994 Buick Roadmaster

1 Answer

Replaced fuel pump, pump wiring harness, fuel

I replaced fuel pump, pump wiring harness, fuel strainer and tested wiring for power and still not getting any fuel out of pump on my 1994 Roadmaster. If I spray starting fluid in the intake it starts for a quick second then dies.

Posted by on

  • sdlogan5286 Sep 30, 2009

    I did replace the fuel pump relay and checked to see if there is power at the fuel pump. Is the Oil Pressure Sensor also known as Oil Pressure Switch?

  • sdlogan5286 Oct 04, 2009

    Where is the oil pressure sensor (switch) located on the LT1 in a 94' Roadmaster?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,596 Answers

Fuel Pump RELAY & FUSE CHECKED & DO you Have POWER "TO" Fuel Pump ? ALSO OIL Sending Unit Supplys the GROUND To Fuel Pump , This is A Saftey FEATURE that Shuts Down Fuel If ENGINE Looses OIL PRESSURE . And If This OIL Sending Unit or also Called (OIL PRESSURE SENSOR) << If It FAILS it WILL Cause What Seems Like A Fue Pump Problem But Is Rally Just The Sensor that is BAD. HOPE this Sheds Light on Your Problem !

Posted on Sep 30, 2009

  • Ronnie Wilson Sep 30, 2009

    Yes it is And Has 3 wire Plug, It may have 2 Different ones

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Electric fuel pump works sometimes and it seams to always work if you turn the key on and off till you here the pump come on


Bad Ignition Switch

Worn out Fuel Pump

Worn Fuel Pump Relay Contacts

Do the proper testing

Do not replace any parts until
they fail a test

Mar 04, 2014 | 2000 Mercury Sable

1 Answer

How to replace a fuel strainer on a 2000 Nissan maxima


Remove rear seat now u have access to fuel pump. Remove cover disconnect wire harness. Then there is a big plastic screw top which goes around whole pump and secures it to fuel tank. Turn counter clockwise with some force without breaking it. The remove pump slowly so you dont break fuel level float. Now you should have access to the strainer.

Nov 04, 2013 | Cars & Trucks

1 Answer

2004 gmc sonoma will not start after very hard braking


This could be electrical, when you get engine not to start check your fuel pressure and also see if you have spark, this will help in finding the problem.

these trucks are none for electrical connector problems to fuel pump, by checking to see what the engine is missing ,like spark or fuel will help, check the ground to the frame on the rear of the truck .if you locate the wiring harness going to pump you will see groud wiring leading off harness to frame rail, make sure that is good also you can try to move wiring while someone is trying to start engine to see if it is a wiring problem,

If it turns out to be wiring to pump there is a replacement connector sold to rewire fuel pump connector, start with these tests and will go from there. good day.

Sep 28, 2012 | 1994 Oldsmobile Ninety Eight Regency

1 Answer

My fuse for the fuel pump keeps blowing. the fuel pump was replaced. it was intermitant now as soon as you put the fuse in it pops. Short in the wiring somewhere?


When the fuel pump is replaced, often the correct wiring harness needs to be spliced in. The original wiring harness was more than likely reused. It is very possible the wiring harness is the cause for the short. Other than that, check where the wires go from the fuel pump wiring harness to the connection to where they go back inside the car. Corrosion is often another problem.

Feb 09, 2011 | 1994 Pontiac Grand Prix

1 Answer

How do i replace the wiring harness in a 94 dodge shadow, there is a short leading to the fuel pump


You may not be able to replace the harness 1. it most likely not even available 2. its too expensive and 3. the labor involved would be huge. You will need to find it and repair it. it always helps to tell what engine/ trans you have, the wiring diagrams are different. The white wire will be power and it comes from the fuel pump relay (drivers strut tower, inner relay) take a test light and put one lead on positive battery terminal, now disconnect the relay and connect test light to the white wire, now disconnect the fuel pump and if the light is on, there is a short, and you will need to follow the harness and wiggle it until the light flickers, then you may find the short.

Dec 04, 2010 | 1994 Dodge Shadow

1 Answer

Fuel pump on 1994 caprice not pumping fuel. its a new pump. replaced pigtail harness and relay. checked all fuses and used test light to check wires connecting to fuel pump.


I've run into new pumps that didn't work. If there is power at the pump and it is not pumping, then the pump should be replaced, again (under warranty).

Aug 17, 2010 | 1994 Chevrolet Caprice Classic

1 Answer

Bad wiring to fuel pump


don't know how you came to this conclusion but your fuel pump harness has four wires two for the gauge and two for the pump, if you dont know what they are you go over to a auto parts place have them show you one and look at the harness to see which go to the pump now go test the pump on your truck remember when you turn the key you will only recieve power to fuel pump for a few seconds to prime the fuel line after which once it starts the computer cintrols the rest. you might have a bad crank sensor causing it to not start.

May 18, 2010 | 1994 Dodge Ram 2500

2 Answers

Birning the fesue for the fuel pump


You could have a short in the wire harness to the fuel pump or the fuel pump it self is bad or the relay has gone bad also. Start with the replacement of the fuel pump relay and also find the wire harness to the fuel pump sending unit from the frame to the gas tank and disconnect the connections. If the fuse does not blow when the connection to the fuel pump is disconnected, then it's a go chance that it's the fuel pump. If the fuse blows and the wire harness is disconnected, then the problem is towards the fuel pump relay and fuse block. Good luck and keep me posted, be glad to help you get your car running 100% again. 

Jul 27, 2009 | 2003 Kia Rio

3 Answers

1999 oldsmobile silhouette van won't start. no power to fuel pump


I have a silhouette and it had the same problem
Follow the fuel pump wiring harness to where it plugs into the floor of the van--pull the connectors apart--they will probably be corroded, and you will possibly have to change both wiring harnesses or connectors.

May 25, 2009 | 1999 Oldsmobile Silhouette

1 Answer

Fuel pump not getting power.


Check and replace pump relay if you have not already.

Feb 20, 2009 | 1994 Chevrolet Caprice Classic

Not finding what you are looking for?
1994 Buick Roadmaster Logo

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...