Question about 2003 Pontiac Grand Am

2 Answers

MY turning signals nor hazaed lights blink any more...they dont flash, make noise or anything. nothing comes up on the dash board either...i think it might be my flasher unit but i have no idea to access it, neither does my mechanic...i have a 2003.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Located as one whole unit in steering colomn, called a multifunction switch

Posted on Jun 22, 2011

  • polar-bear30 Jun 22, 2011

    Costs around 100 takes 15 mins to install. Remove 4 screws in panels behind steering wheel, drop panels and it fits on top side. Includes wiper switch, signals switch all as one unit.

  • polar-bear30 Jun 22, 2011

    The actual fuse is located behind your stereo. Remove covers, but leave stereo connected unless you have anti- theft code. Fuse is right there after you pull out stereo. Good luck ya'll!

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 474 Answers

Its probably your flasher unit. most auto parts sters have the and can give you the location if the dont replace it for you

Posted on Sep 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My signal are working well outside but dose not indicate on the datch board car nissan altima 2003


There is a Relay usually in the interior Fuse Panel under the Dash for the Turn signal that's where the clicking noise comes from also when your turn signals are on, I suspect you have a bad Relay or even a Fuse. Its unlikely the bulbs simultaneously went out in the Dash. So check your fuses and the Turn Signal Relay.

Jun 17, 2015 | 2003 Nissan Altima

1 Answer

Brake lights turn signals not working


Try turning the 4 way flasheras on and off a couple of times and see if that clears the problem.

Jun 12, 2013 | Pontiac Cars & Trucks

1 Answer

Chevrolet impala 2002 turn signals


check to see if you have a bulb blown out

Dec 04, 2012 | Cars & Trucks

1 Answer

I have an 02 kia sportage. my signal lights come on but dont blink outside. no lights for the signal lights come on on the dash at all. also, no hazard lights.


If the 15A HAZARD fuse in the passenger compartment fuse box is OK, power is getting to the hazard function of the flasher unit. Pressing the hzard switch should cause the hazard lights to flash. HOWEVER, there is an electronic time and warning indication system module connected to to the hazard switch lead and that may be affecting things. If the 10A TURN fuse is OK, power is applied to the turn switch (with the engine in START or RUN) and you state you can select a right or left turn. HOWEVER, the RED/WHT and RED/BLU outputs from the flasher unit connect directly to the front and rear turn lamps and the instrument cluster turn indicators so you are not getting any flasher output. Again, that electronic time & warning indication system module could be affecting things

Oct 26, 2012 | Cars & Trucks

1 Answer

Nothing works,door locks, lights, no noise of any


security system failure will shut everything down
(IT THINKS IT IS BEENING STOLEN) an locked it self out

Mar 03, 2010 | 2005 Chevrolet Equinox

3 Answers

Turn signals dont blink.


You need to replace the turn signal flasher, it's a cylinder shape and may be silver or gold in color. When it goes bad, the turn signals stop flashing. Good luck and keep me posted.

Feb 16, 2010 | 1994 Chevrolet S-10 Blazer

2 Answers

Turn signals come on but dont blink


its in the fuse box, round with 2 spade pins on older models, on newer ones they used morep ins...but same logic.

cycle and release your HAZZARD switch a few tymes. Hazzard switch has an over-ride for the turn signals, and sticky switches will sometymes cause a NO FLASH problem that a cycle of the switch can correct. If lights still dont flash, flasher unit has probably failed/

Sep 19, 2009 | Ford E-250 Cars & Trucks

1 Answer

Turn signals 2003 Ford F-150


Sounds like the turn blinker is shorted internally. Suggest you change it out, to test this.

My next check is that no wiring is melted and burned, such as can happen with any connection to tow a trailer. U-Haul has fine print that indemnify them of any problems they cause! have you towed anything recently?


Dec 25, 2008 | 2005 Ford F-150

Not finding what you are looking for?
2003 Pontiac Grand Am Logo

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...