Question about 2004 Ford F250

1 Answer

Drain fuel water separator - 2004 Ford F250

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Ford Master
  • 1,564 Answers

There is a plastic thumbwheel at the base of the seperator, turn it out until the fluid starts to flow(do not run the engine while doing this) it is a good idea to use a clear bottle or a clear bowl to catch the fluid. This way you can determine when the water has completly empyied from the filter. Thanks, Dana

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water in fuel separator


Drain fuel filter should have a drain hoze Under fuel filter

Apr 21, 2014 | SsangYong Rexton Cars & Trucks

1 Answer

Fuel water separator


Their is a cable with a tee handle on it next to your trans dipstick , always grab the tube with one hand and pull with other or you will break the bracket that\'s attached to it . If this has been done regularly you will not have an issue , the drain tube goes down the engine on the right side and usually soaks your front axle. But if you are replacing the fuel filter you have to remove the air cleaner box and also the silencer box to access the filter . My advise is not to use drain valve , suck out as much fuel as you can and then thoroughly clean out that fuel bowl before you install the filter .I have seen many of these powerstrokes with low power issues stemming from lack of maintenance. Make sure you change your oil regularly 5-6000 miles and if you live in a cold weather state you need to use 10w30 motor craft diesel oil , it works the best with those injectors

Mar 29, 2014 | 2002 Ford E350

1 Answer

Drain water separator light on, will not start


for water to drain out there has to be a means for the fuel to be replaced. most probably the fuel didn't flow in as the water ran out so air got in as the water was coming out. That means that you will have to bleed the air out of the fuel system the same as if you changed a filter.

Mar 13, 2014 | 2008 Ford F 250 Super Duty 4WD

1 Answer

How to replace a diesel pomp


.
  1. CAUTION
  2. Smoking or open flame of any type must not be present when working near fuel or fuel vapor.


  1. Disconnect both battery ground cables.


  1. Raise and support the vehicle.
  1. Before servicing the vehicle, refer to the Precautions Section.
    CAUTION Smoking or open flame of any type must not be present when working near fuel or fuel vapor.
  2. Disconnect both battery ground cables.
  3. Raise and support the vehicle.
  4. Open the fuel/water separator drain valve to release the fuel pressure.
  5. Disconnect the electrical connectors.
  6. Disconnect the fuel pump electrical connector.
  7. Disconnect the fuel warmer electrical connector.
  8. Disconnect the water-in-fuel electrical connector.
  9. Disconnect the fuel hoses.
  10. Remove the fuel hose retaining clips and discard. Disconnect the fuel hoses from the fuel pump.
  11. Press in the retaining clips and release the fuel hoses.
  12. Remove the mounting nuts and the fuel conditioning module.
  13. To install, reverse the removal procedure. Torque the nuts to 11 ft. lbs. (15 Nm).

  1. Open the fuel/water separator drain valve to release the fuel pressure.

12_18_2011_10_53_10_pm.jpg

Dec 18, 2011 | 2007 Ford E-350 Super Duty Length XLT

1 Answer

I have a peugeot 4007 and it is coming up on the electronic display remove water in separator? what does that mean and is it safe to drive?


It means your fuel system has a water trap to separate the water from the fuel. It is getting full of water and needs to be drained before it begins to let water back into the fuel system. If that happens, your engine will run very badly.

Jan 09, 2011 | Peugeot 505 Cars & Trucks

1 Answer

How do I change the fuel, water separator filter


#1 Disconnect the battery ground cables from both batteries.#2 Drain fuel from the fuel filter into a sutable container.#3Remove the water drain tube from the bottom of the filter assembly.#4 Unscrew water separator drain bowl and remove. Remove the filter element.#5 Installation is the reverse of the removal procedure.Screw a new filter element onto the filter base until seal contacts ,then tighten filter one half to 1 turn.I hope this is helpfull, good luck.

Dec 06, 2010 | 1990 Ford F350

1 Answer

Location of 2nd fuel filter


one is in the tank.

Filter Removal and Installation
s3o~us~en~file=ani_caut.gif~gen~ref.gif WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related component. Highly flammable mixtures are always present and may be ignited, resulting in possible personal injury.
  1. Relieve the fuel system pressure. For additional information, refer to Section 310-00 .
  1. Disconnect the fuel lines from the fuel filter. For additional information, refer to Section 310-00 .
  1. Remove the fuel filter.
    • Loosen the fuel filter clamp screw.
  1. NOTE: Make sure that an audible click is heard when installing the fuel lines. Pull back on the fuel lines to confirm engagement.
    To install, reverse the removal procedure.
----------------------------------------------------------
Filter -Water Separator Removal
s3o~us~en~file=ani_caut.gif~gen~ref.gif WARNING: Smoking or open flame of any type must not be present when working near fuel or fuel vapor.
s3o~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: The fuel system contains pressurized fuel after the vehicle is shut down and will maintain this pressure for a long period of time.
  1. Disconnect both battery ground cables. On vehicles equipped with dual batteries, refer to Section 414-01 .
  1. Open the fuel filter/water separator drain valve to release the fuel pressure. Completely drain the fuel filter/water separator assembly.
  1. Disconnect the fuel supply and fuel return lines.
  1. Disconnect the two cylinder head fuel supply lines.
  1. NOTE: The turbocharger compressor manifold is removed for clarity.
    Disconnect the electrical connector from the fuel filter/water separator.
  1. Remove the fuel filter/water separator from the vehicle.
    1. Disconnect the exhaust back pressure sensor electrical connector.
    1. Remove the fuel filter/water separator bolts.
Installation
  1. s3o~us~en~file=ani_caut.gif~gen~ref.gif WARNING: Clean all the fuel residue from the engine compartment. Failure to do so can cause personal injury or damage to the vehicle.

Nov 19, 2010 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

Ford suer duty 250 diesel has diesel in water


I think you mean that you have water in your diesel fuel. Open the valve behind the fuel/water separator and drain out some of the watery fuel into a pan (place pan under the car). If you have a lot of water in your fuel, you may need to have a professional drain your fuel tank, flush out the fuel system, and try to salvage the fuel for reuse. I hope this helps.

Aug 29, 2010 | 2005 Ford F 250 Super Duty

1 Answer

2005VWPassatTDI Where is the fuel-water separator?


On the bottom of the diesel filter...a plastic bolt.

Mar 12, 2009 | 2005 Volkswagen Passat

Not finding what you are looking for?
2004 Ford F250 Logo

Related Topics:

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...