Question about 1993 Jeep Cherokee Country

1 Answer

Drain and Refill brake fluid (step by step)

I need to drain and refill the brake fluid in order to replace caliper

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 34 Answers

You shouldnt have to drain the brake fluid! havent heard of that before but i might be wrong. but anyways all you have to do to drain it is that there should be a little nipple looking thing somewhere on the caliper it might have a rubber peice on it. screw that off and the fluid should come out. to speed up the process push on brake. after replacing the caliper you need to bleed the brakes. wich means getting all the air out of them by turning the same nipple and witing till the fluid runs out then screw it back tight. dont press brake on this part

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What do I do if someone of lower than normal intelligence not me put a little ATF fluid in the Brake Master cylinder?


Completely drain the brake system,
refill with new fluid and purge ,
drain again
refill again and purge

Jul 07, 2017 | Cars & Trucks

4 Answers

I put power sterring fluid in my brake master cylinder,what can happen?


It will cause the breaks to not work at all u would have to flush the hole break system out by usein break fluid an bleeding them out till nothing but break fluid comes out I hope this helps buddy

Apr 04, 2012 | 2003 Jeep Liberty

1 Answer

Got 55k on a 2004 Dodge Dakota any scheduled service for 60k....like belts transmission etc?


The 60K service on this vehicle requires the following....

Change engine oil and engine oil filter. X X X X X Change rear axle fluid. X X Change front axle fluid (4X4). X X Inspect brake linings. X X Inspect engine air cleaner filter, replace if necessary. X Replace spark plugs. X Inspect PCV valve, replace as necessary.* X Inspect auto tension drive belt and replace if required. X Drain and refill transfer case (4X4). X Drain and refill automatic tranmission fluid, change filter and adjust bands (3.7L). X Drain and refill automatic tranmission fluid and change main sump filter (4.7L).

Oct 13, 2010 | 2004 Dodge Dakota

1 Answer

I put 2 front brakes shoes on my 1995 Nissan Maxima,what is the correct way to bleed my brakes?Is their any order that i need to follow?


Did you open the bleeder screws at all. If not you may not need to bleed the brakes just pump the pedal to bring the caliper pistons out and your pedal should feel fine. If you just want to blled anyways open all your bleeder srews and as the fluid level in your brake master cylider goes down refill with new dot 3 brake fluid (do not alow the master cylider to drain completely). Close bleeders when you get clean fluid through. Start at passenger rear corner and have a buddy press the brake pedal down. open bleeder, close bleeder after squirt of fluid then have buddy release pedal. Do this a couple of time per corner. Go from pass rear to drivers rear then pass. front ending with driver front. You just flushed your brake fluid. Hope this helps.

Oct 05, 2010 | 1995 Nissan Maxima

2 Answers

How often should I change the Transmission fluid, normal driving ? Thank you Gary


It's listed in your owner's manual. Schedule A is normal driving conditions.
SCHEDULE "A"
7,500 miles (12 000km) or at 6 months
- Change engine oil.
- Replace engine oil filter.

15,000 miles (24 000km) or at 12 months
- Change engine oil.
- Replace engine oil filter.

22,500 miles (36 000km) or at 18 months
- Change engine oil.
- Replace engine oil filter.
- Inspect front wheel bearings.
- Inspect brake linings.

30,000 miles (48 000km) or at 24 months
- Change engine oil.
- Replace engine oil filter.
- Replace engine air cleaner filter.
- Replace spark plugs.
- Drain and refill automatic transmission fluid and filter (4.7L).

37,500 miles (60 000km) or at 30 months
- Change engine oil.
- Replace engine oil filter.
- Drain and refill automatic transmission fluid and filter (5.2L/5.9L).
- Drain and refill transfer case fluid.

45,000 miles (72 000km) or at 36 months
- Change engine oil.
- Replace engine oil filter.
- Inspect front wheel bearings.
- Inspect brake linings.
- Flush and replace engine coolant at 36 months, regardless of mileage.

52,500 miles (84 000km) or at 42 months
- Change engine oil.
- Replace engine oil filter.
- Flush and replace engine coolant if not done at 46 months.

60,000 miles (96 000km) or at 48 months
- Change engine oil.
- Replace engine oil filter.
- Replace engine air cleaner filter.
- Replace ignition cables (5.2L/5.9L).
- Inspect PCV valve, replace as necessary.
- Replace spark plugs.
- Inspect auto tension drive belt and replace as necessary (5.2L/5.9L).
- Drain and refill automatic transmission fluid (4.7L).

67,500 miles (108 000km) or at 54 months
- Change engine oil.
- Replace engine oil filter.
- Inspect front wheel bearings.
- Inspect brake linings.

75,000 miles (120 000km) or at 60 months
- Change engine oil.
- Replace engine oil filter.
- Drain and refill automatic transmission fluid and filter (5.2L/5.9L).
- Drain and refill transfer case.
- Flush and replace engine coolant if it has been 30,000miles (48 000km) or 24 months since last change.
- Inspect auto tension drive belt and replace if required.

82,500 miles (132 000km) or at 66 months
- Change engine oil.
- Replace engine oil filter.
- Flush and replace engine coolant if it has been 30,000miles (48 000km) or 24 months since last change.

90,000 miles (144 000km) or at 72 months
- Change engine oil.
- Replace engine oil filter.
- Replace engine air cleaner filter.
- Replace spark plugs.
- Inspect front wheel bearings.
- Inspect brake linings.
- Inspect auto tension drive belt and replace as necessary.
- Drain and refill automatic transmission fluid (4.7L).

97,500 miles (156 000km) or at 78 months
- Change engine oil.
- Replace engine oil filter.

105,000 miles (168 000km) or at 84 months
- Change engine oil.
- Replace engine oil filter.
- Flush and replace engine coolant if it has been 30,000 miles (48 000km) or 24 months since last change.
- Inspect auto tension drive belt and replace if required.

112,500 miles (181 000km) or at 90 months
- Change engine oil.
- Replace engine oil filter.
- Drain and refill automatic transmission fluid and filter (5.2L/5.9L).
- Inspect front wheel bearings.
- Inspect brake linings.
- Flush and replace engine coolant if it has been 30,000 miles (48 000km) or 24 months since last change.

120,000 miles (192 000km) or at 96 months
- Change engine oil.
- Replace engine oil filter.
- Replace engine air cleaner filter.
- Replace ignition cables (5.2L/5.9L).
- Inspect PCV valve, replace as necessary.
- Replace spark plugs.
- Inspect auto tension drive belt and replace as necessary.
- Drain and refill automatic transmission fluid (4.7L).

Thanks for using FixYa -a 4 THUMBS rating is appreciated for answering your FREE question.

Sep 05, 2010 | 2001 Dodge Durango

2 Answers

My 2002 toyota sienna has never had its trans fluid changed. It has 69000 miles on it. No troubles yet but the fluid is brown. Should I just drain what comes out of the drain plug and replace it ?


Yes, absolutely.

I don't think you'll find a drain plug though. (You might, but I doubt it.)

If there is no drain plug, you drain it by removing the pan from the transmission.

Jun 23, 2010 | 2002 Toyota Sienna

1 Answer

Need to change the fluid on an 02 santa fe 2wd w/ 2.7


Use ONLY Hyundai SPIII fluid - no other substitute is available. Several ways to do this - drain & refill several times: run engine to operating temp and cycle the trans through D & R. drain fluid again, refill and run engine again and cycle D & R, drain and refill again. Do not over fill - check when fluid is hot, the adjust level.
The other way is a Trans-Flush machine which performs a 'fluid exchange' - pulls old fluid out while replacing it with fresh fluid while the engine is running at idle in Neutral.

Sep 04, 2009 | 2002 Hyundai Santa Fe

2 Answers

2002 buick rendezvous groans when turning


The fluid in the versa trak AWD in the rear is old and needs to be drained and refilled. After you drain and refill it, make a bunch of sharp left and right hand turns, then drive it for 10 minutes. Drain and refill it for the second time and problem solved. Use only versa trak fluid available at any GM dealership. There is TSB on this now at the Buick dealership.

Jul 22, 2009 | 2002 Buick Rendezvous

2 Answers

Bleeding abs brakes


Try using a pressure bleeder. It will force the air out. Works every time.

Nov 08, 2008 | 2001 Ford Mustang

Not finding what you are looking for?
1993 Jeep Cherokee Country Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...