Question about 2002 Chrysler Town & Country

1 Answer

Hi the forward clip of y driver side mirror is completly broken im petrified to roll down my window bc its broken off the track 3 times and finally that part broke and im in the military and daily have to show my id i just wanna get this fixed very inexpensively

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 122 Answers

My suggestion is to order a power window regulator, you can get from several auto parts stores onlinelike autopartswarehouse.com, I had a similar problem on a 2000 model and looked at fuses and relays, all were good. the regulator can be as much as 300.00 at the dealer, autopartswarehouse.com was a good choice for me. remove the panel, this can be tricky so start with the latch area, 1 screw behind a plastic cap, 1 in the door pull area, start removing the panel at the bottom and use a flat blade screw driver or similar item to get under the panel should pop out, and this will sound like you are breaking it, but it will be fine. remove the innerlining plastic (tears easily) so be careful with this. three bolts on the regulator and two window clips or bolts. 4 bolts, 2 each side of the tracks, reinstall as you have taken apart. good luck and look for about three to four hours of time.

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My drivers side window has fallen off sideways in the door.I rolled it up and the window did close OK. What has happened and will it slide off again


Depending on the make model and year of your vehicle, you have either broken the clip at the back of the window that holds it into the track, have a broken window regulator, or Broken a guide at the bottom of the window. I would say yes, the window will fall if rolled down again until repairs have been made.

Jan 10, 2017 | Cars & Trucks

1 Answer

Why is my passenger door window slipping when rolling up or down?


Broken clips that hold the window to track, damaged lift mechanism

Oct 01, 2015 | 1991 Ford Explorer

1 Answer

Put drivers side window back on track


The track is probably broken, most of them are made of a plastic material and if they become stuck will break.

Aug 15, 2013 | 2005 Pontiac G6

1 Answer

Drivers side power window off track


Roll it down halfway and in with your hands put it back in the place Center of the rubber that wraps the window you should feel it pop or click, test rolling the window up and down if it didn't work try a few more times there's two sides that should slide into place if it doesn't work a Clip broke off the slider you need to disassemble the door find it and replace it

Jul 27, 2013 | 2004 Honda Accord

2 Answers

1997 geo metro front windows stuck


You will need to replace the regulators, they are an incredibly cheap design

Sep 11, 2012 | 1997 Geo Metro

2 Answers

Need to replace drivers side rear view mirror, powered. I have the new mirror, just need to know how t install it.


Hi,
You remove the door panel on the inside and it is bolted on from the inside. One wire clip and 3 bolts. Takes longer to remove and replace the door panel than replace the mirror....look for a hidden screw under the armrest , under the window/door lock button panel and sometimes behind the reflector or light on the bottom of door..Usually there are 3-4 screws and then the rest of the panel is held on by plastic clips. Get the screws out, then work a flat screwdriver or putty knife around the sides and bottom of panel, then lift upwards to get the top sealing side out of the track where the window runs.....Mike

Jul 14, 2011 | Buick LeSabre Cars & Trucks

1 Answer

How to fix my drivers side window the motor is still good i think its off track or a broken clip it will always roll down but will not go up past a certain point you have to pull it up and wedge something...


Hi, this is a common fault with these cars. The window regulator is broken. There are two ways to repair the fault, you can either replace the regulator (£90) or fit a repair kit (£30). The retailers tend to fit the entire regulator as this is less costly because it takes less time to fit. If you are reasonably confident mechanically instuctions for repair are readily available on the net.
Hope that helps Matt..

Nov 19, 2009 | 1998 Volkswagen Jetta

1 Answer

2001 Saab 95 se driver/passenger windows.


A car I owned the left rear window did that. I could pull it up by taking a hold of it while another person held the switch. They told me the problem was the track was made out of plastic and it had broken. They had to replace the track. Yes it was expensive to repair but is ok now.

Mar 10, 2017 | 2000 Saab 9-3 Viggen

1 Answer

WIndow


If your window is off the track and sliding forward (leaving a gap at the rear) when you roll it down; the plastic guide that fits into the track is likely broken and very easy to replace. There should be a hole drilled into your at the top rear of the window where a plastic clip can snap in. Most auto part stores have these for sale or the dealer can be a last ditch alternative. Installation is a snap, literally (forgive the pun), roll your window half way down, you fold the clip over into the hole, snap it together and fit the window and the clip back in the the rail. Usually you can just grab hold of the top of the window and push the whole thing into the rail. Good Luck! Nick

Nov 08, 2008 | 1999 Pontiac Grand Am GT

Not finding what you are looking for?
2002 Chrysler Town & Country Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...