Question about 1993 Subaru Legacy

1 Answer

What oil do I need to top off a manual 5-speed transaxle on a 1993 Subaru legacy, front wheel drive. Anyone know?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 119 Answers

About 3.5 to 4 quarts of 80-90 gear oil

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Or should i say how much gear oil does my 94 nissan sentra hold?


Conventional front wheel drive? Well, a 4-speed (RN4F31A) takes 5.9 pints. Two different 5-speeds were available: RS5F21A takes 6.2 pints. RS5F32V takes 7.8 pints.
So, depending on which one you have, I guess. Chilton sez the transaxle number is attached to the "clutch withdrawal lever" on manual transaxles.

Dec 06, 2014 | Cars & Trucks

Tip

General Motors gear ratios hide] 1 GM Rear Wheel Drive...


General Motors gear ratios
hide]

GM Rear Wheel Drive Transmissions

PTU = Power Transfer Unit (Crossover SUV AWD/4WD)

6 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
MNK Allison 1000
MNZ Allison 1000
MW7 Allison 1000
MYB
MYC

5 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
M74 Allison 1000
M22 5L50-E
M82 5L40-E
MTW Allison 2400
MX4 Allison 2000
MX5 5L40-E with PTU*
MV3 5L50-E with PTU*

4 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
M30 4L60-E
M32 4L60-E HD
M32 4L65-E
M33 4L60-E Hybrid
M41 4L30-E
M70 4L70-E Super Duty
M99 2ML70 2-mode Hybrid*
MD8
ML4 4L30-E
MN8 4L80-E HD
MN8 4L85-E
MT1 4L80-E
MW9 HM 200-4R
  • EVT Mode 1 The 2ML70 can operate in electric mode or non-electric mode in first gear with a gear ratio of infinity to 1.70:1.
  • EVT Mode 2 The 2ML70 operates in non-electric mode with a gear ratio of 1.70 - 0.738:1

3 Speed Automatic Transmissions

RPO Trans Name 1st 2nd 3rd
M40
M41
M65
MD2
MD3 HM-180
HM-200C
HM-350
HM-400

GM Front Wheel Drive Transaxles

6 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
MH2
MH4
MH6 6T75 (AWD)
MH7
MH8
MY9 6T75 (AWD)

5 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
Aisin-AW 55-51LE
M09 Aisin-AW AF33-5
M43 Aisin-AW AF23-5
M45 Aisin-AW AF33-5
M98 AF33-5
MJ7 Honda 5AT
MJ8 Honda 5AT w/PTU*
MLS Aisin 50-40E
MU3 Saab 76.5mm

4 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
MLQ Aisin 81-40LE
Aisin ZF 4HP 16
HM 325-4L
Jatco JF405-E
M10 Jatco JF403-E
M13 4T60-E HD
M13 4T60-E
M15 4T65E
M45 Aisin-AW AF33
M57 A245-E
M76 4T65E with PTU*
MD7 4T65E
ME7 4T45-E BAS Hybrid
ME8
ME9
MH1 4T80-E
MN3 4T65E
MN4 4T40/45-E
MN5 4T45-E
MN7 4T65E HD
MS7 A240-E
MU4 A246-E
MU5 U341-F

3 Speed Automatic Transaxles

RPO Trans Name 1st 2nd 3rd
M60 GEO Metro
MB3 A131L
MD9
MX1 A131L
GEO Storm
HM-425

GM Manual Transmissions

6 Speed Manual Transmissions

RPO Trans Name 1st 2nd 3rd
M10 Tremec 85mm
M12 Tremec T56
ML6 ZF S6-650
ML9 ZF S6-40
MM6 Tremec T56
MV1 Aisin 85mm
MV5 Aisin D173 AY6
MV6 Aisin 85mm
MZ6 Tremec 85mm

5 Speed Manual Transmissions

RPO Trans Name 1st 2nd 3rd
M35 Getrag 260
M35 Getrag 260 (2003-2004 Cadillac CTS)
M49 BW 5spd
M50
M59 GEO Tracker
M86 Getrag F23 75mm
M94 Getrag F23
M96 Tremec 109mm
MA5 Aisin AR5 82mm
MG3 Getrag F23
MG5
M50
M51
MH3 Tremec T-5
MK5 C59
ML2 Tremec T-5
ML3 Tremec T-5
MT8
MU3 Saab F25
MW2
MW3 NV4500 109mm
TR-3450
TR-4050
TR-4050
2007 Chevrolet Optra and Spark (Trans code Y4A)
2007 Chevrolet Optra and Spark (Trans code Y4M)

4 Speed Manual Transmissions

RPO Trans Name 1st 2nd 3rd
M20 HM-117
M73 Isuzu
MC0 Getrag
MC9
MY6 NP260

More GM Manual Transmissions

6 Speed Manual Transaxles

RPO Trans Name 1st 2nd 3rd
MT2 Opel F40 83mm
MU9 Opel F40 83mm
MTN Toyota C60

5 Speed Manual Transaxles

RPO Trans Name 1st 2nd 3rd
D-16 (2005-2008 Chevrolet Aveo 1.4 DOHC / 1.5L)
D-16 (2005-2008 Chevrolet Aveo 1.4 SOHC)
Y4A (2007 Pontiac Matiz)
YM4 (2005-2007 Chevrolet Aveo)
D-20 (2005-2007 Chevrolet Epica)
L73 Pontiac LeMans F16
M42 Geo Metro
M43 AF23
M49 BW 5spd
M58 Geo Metro
M79 LeMans F13
M86 Getrag F23 (5T45MI)
M94 Getrag F23
M98 Aisin 55-51E
MB4 Geo Prizm 1.8L
MB5 Geo Prizm
MFB 2008 Chevrolet Epica 5-Speed S/R (D24)
MFN 2008 Chevrolet Epica 5-Speed S/R (D33)
MG1 HM-282
MG2 HM-282
MG3 Getrag F23
MJ1 Isuzu
MK7 Isuzu
MLM Y4M (2008 Chevrolet Aveo 1.6 DOHC)
MR3 Isuzu
MU3 Saab F25
MV2 Chevrolet Sprint
MY7 Early J-car

GM Continuously Variable Transaxles

RPO Trans Name Lowest Highest
M83 V20-E
M75 V25-E
M16 V25-E AWD

on Apr 15, 2015 | GMC Cars & Trucks

1 Answer

I have a 1991 Subaru legacy wagon 5 speed and a 1993 Subaru legacy wagon automatic I was wondering can I use the 1991 wagon for a full manual swap


Yes these cars are the same as far as parts go.
You will need to change some wiring on the automatic car for the manual swap to work without changing the wiring harness.

Oct 25, 2013 | Subaru Legacy Cars & Trucks

1 Answer

HAVING A 1993 SUBARU LEGACY TOWED


it must be towed on what is called a "roll back" tow truck because of the all wheel drive.

Aug 08, 2012 | 1993 Subaru Legacy

1 Answer

1997 subaru legacy with awd transmission - driveshaft has been removed due to bad u-joints and trans. locked up the front wheels. What do we need to unlock them?


I have a 93 legacy. Subaru's always run in front wheel drive until a sensor tells the computer the front wheels are not turning the same speed as the rear wheels( spining on ice or sand etc.). At that point all wheels will be driven though a clutch to the rear wheels. This is not good if the car needs to be towed with the front wheels in the air! This "all wheel drive" can be shut down for towing. Under the hood on my 93, there is an in line fuse holder on the pass. side of car behind the front strut mount. Open the top of the holder and it will be empty, put in a fuse (10 or 20 amp or close) , this completes a circuit and shuts down the rear wheels. I don't know if the your 97 has this in the same place, but it must have one some place. hope this can help you.

Apr 29, 2011 | 1997 Subaru Legacy

3 Answers

Rear cluch not working


Depends on what model and components you have:

{ ...
ENGINE TORQUE DISTRIBUTION – DIRECTING THE FLOW OF POWER
In an all-wheel-drive vehicle, engine power can be directed to all four wheels. Subaru Symmetrical AWD differs slightly from model to model in how it directs power to the wheels, depending on its transmission.

MODELS WITH FIVE-SPEED MANUAL TRANSMISSION – CONTINUOUS ALL-WHEEL DRIVE: A viscous-type locking center differential and limited-slip rear differential help distribute torque – normally configured at a 50/50 split front to rear. If wheel speed differs between front and rear axles, the center and/or rear differentials lock up to help distribute power to the wheels with the most traction.

MODELS WITH FOUR-SPEED AUTOMATIC TRANSMISSIONS – ACTIVE ALL-WHEEL DRIVE: An electronically controlled variable transfer clutch and limited-slip rear differential distribute power to where traction is needed. Sensors monitor parameters such as wheel slippage, throttle position, and braking to help determine torque distribution and direct it to the wheels with optimum traction.

MODELS WITH FIVE-SPEED AUTOMATIC TRANSMISSION – VARIABLE TORQUE DISTRIBUTION ALL-WHEEL DRIVE: As with Active All-Wheel Drive, an electronically controlled variable transfer clutch distributes power, but through a planetary-type center differential and a viscous-type limited-slip rear differential. Torque distribution is normally configured at a performance-oriented rear-wheel-biased 45/55 split front to rear. Sensors monitor the same parameters as for Active All-Wheel Drive.

WRX STI, WITH SIX-SPEED MANUAL TRANSMISSION – DRIVER CONTROLLED CENTER DIFFERENTIAL (DCCD) ALL-WHEEL DRIVE: The STI uses an electronically managed multi-plate transfer clutch and a mechanical limited-slip differential in conjunction with a planetary-gear-type center differential to control power distribution between the front and rear wheels. Featuring manual and three automatic modes, DCCD is normally configured at a 41/59 split front to rear. Sensors monitor parameters such as wheel slippage, steering angle, throttle position, and braking to help determine torque distribution and direct it to the wheels with optimum traction. DCCD also features a limited-slip helical front and Torsen® rear differential. ... }

And what are the symptoms? How do you know the coupling to the rear is not working?

Jun 05, 2010 | 1995 Subaru Legacy

3 Answers

How much transmission fluid does a 1999 subaru Legacy BH need


automatic trans 2.2liter engine- 1990-1993/ 8.8 qts.
1994-on/ 8.4 qts
2.5 liter engines 10 qts. all years

manual trans 2.2 liter 2wd 1990-1994 3.5 qts
1995 2wd 3.7 qts

4wd 1990-1994 4.2 qts
4wd 1995 on 3.7 qts2.5 liter aall years 3.7 qts.

Jan 25, 2009 | 1999 Subaru Legacy

1 Answer

1993 Subaru Legacy Wagon: Bumpy Brakes


Your '93 Legacy was one of the first cars to provide ABS as standard. If your ABS is activating, you'll feel a fast pulsing feel when braking, is that what you experience? 
If it's more of a brake pedal movement that changes frequency with the cars change of speed, and when moving slowly it feels slower and more pronounced, you likely have a warped rotor. 
An ABS issue should be checked out by a Subaru mechanic. If it's the rotor, then the offending rotor will have to be machined or replaced. If you can identify the rotor that's warped (with the car on stands, rig up a steel ruler so that it touches the rotor, and spin the wheel by hand. If it touches intermittently, then the rotor is warped) you may be able to remove it yourself (buy a workshop manual for instructions) and bring it to a brake shop and have it machined. This is far cheaper than they doing the whole job. 
However, if you're not comfortable with these suggestions, then have a brake shop do it for you. This is an important safety device (obviously) and worth the money to have it done correctly. Early Legacy's are pretty much bullet-proof and last forever, so the investment will be worthwhile.
Hope this helps.

Dec 27, 2008 | 1993 Subaru Legacy

Not finding what you are looking for?
1993 Subaru Legacy Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...