Question about 2002 Mazda MPV

1 Answer

My MPV low beam are not working. I have switched up the bulbs and the low beam still do not work. I can turn on the high beam fine. What could be the problem? I do not have a owner's manual to research the problem.

Posted by on

  • nreid_1224 Oct 03, 2009

    I had to get a tune up on the van so I took it to my local mechanic. He saw that the wiring to the headlight was chewed on and a short happened and melted the cap that connects to the headlight bulb. Luckily he repaired the problem for just the cost of parts. It was funny to hear the mechanic complain on how tightly packed everything is in the vans engines compartment. Changing the bulb and wiring on battery side brought out some colorful remarks from him.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 347 Answers

Check the switch lever on the steering wheel. switch on and off for so many times. check headlight fuses and relays.

Posted on Oct 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

One low beam head lights will not work, high beam works though


check for a damaged wire for the low beam. Also wouldn't hurt to check the ground wire as the high beam will try and ground through the low beam but not visa verse

Dec 29, 2013 | 1997 Chevrolet Blazer

1 Answer

Both low beam headlights are out.


check for voltage at the high beam switch when high beams are turned on.

Oct 08, 2012 | 2004 Ford Focus

1 Answer

Mazda cx7. both high beams work and one low beam works. how can i tell if its a headlight or some other problem


Thanks for choosing FixYa and welcome. These new lights have two types lin one bulb, one for the low beam and one for the high beam. Find the bulb that isn't lighting for the low beam and replace it with a new bulb. If it doesn't work, you need to check the wiring to that specific light. Since it is only one, the new bulb should work.

Oct 01, 2011 | 2000 Mazda MPV

1 Answer

I recently puchased blueish headlight bulbs for my 2006 Volvo S80. The original bulbs were 55W for both the low and high beams. i replaced the high beams with 100w blueish bulbs and they work fine. When...


i think im right in saying the low beam bulbs are twin filament(low and high beam in one)and the main/high beam are single filament(spotlights).

Aug 17, 2010 | 2006 Volvo S60

1 Answer

The high beam indicator is on. The low beams don't work.


You need a new headlight dimmer switch located on the steering column between the dash and the firewall

Jun 03, 2010 | 2000 Mazda MPV

2 Answers

Low beams don't work; High beams fine. Not the


the high beam switch is at fault
A new one is needed
The directional lever you pull up on to switch to high and low connects to a rod which is going to the high beam switch at the mid section of the steering coluum. It is a headache to change for your on your head replacing this part

May 24, 2010 | 2004 GMC Envoy

1 Answer

Lowbeams on Mpv went out. Highbeams ok, but


how are the headlight bulbs..i have seen many mechanics change all kinds of parts and turned out to be just both lamps coincidently went out at same time

Dec 10, 2009 | 2000 Mazda MPV

2 Answers

Low beams dont work, only high beams do. 02 tacoma


If there is power there, then it has to be the bulbs. The trouble that most people have is, they don't see how both bulbs could burn out at once... and they're right. They don't. But you see vehicles with one headlight all the time. They don't know it unless you tell them or they happen to see it themselves. Then the second light burns out, and they think it's a major catastrophe, when in fact, it's just bulbs. The high beam still works because the bulb is double filament. The only other thing it can be is the dimmer switch, and since you switched it to high, it appears to be working. However, if it's not bulbs, it still could be the switch.

Oct 07, 2009 | 1996 Toyota Tacoma

Not finding what you are looking for?
2002 Mazda MPV Logo

477 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8274 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...