Question about 1999 Plymouth Voyager

1 Answer

How do I remove the window crank and the drivers side door panel on a 1999 Plymouth Voyageur ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 353 Answers

You need a tool to remove the clip behind the handle. It is called window and door handle remover tool.

How do I remove the window crank and the drivers - 6710d07.jpg

Posted on Sep 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuze located for my power windows in a 99 Plymouth voyageur


Please refer the owners manual that came along with the vehicle

Feb 20, 2015 | 1999 Plymouth Voyager

1 Answer

How do I get the window crank off?


there is a clip between the door panel and the crank handle realy hard to see you can use a long flat skinney screw driver on the end of the clip to push it off

Aug 20, 2012 | 1999 Saturn SL

1 Answer

I need to replace side view mirrors on a 91 Plymouth Voyager. I realize I need to remove the door panel. How do I remove the window crank?


remove door handle two screws ,now the window handle has a clip on the back remove it with a needle nose pliers,then with a screw flat screw driver pry the edge is just snap on clips good luck and thank you for choosing fix-ya

May 18, 2011 | Plymouth Voyager Cars & Trucks

1 Answer

How too remove door panel and window crank handle on driver side on 2001 chevy van


On that model of van, you will have to remove the screws on the lower side of the panel, and in the door handle. The window crank handle has a spring clip in it that takes a special tool that is available at any parts store, but very easy to use (you just slide it up and down inside of the handle a few times, and it should pop off). After you have the screws, and handle off, you will need to "pop" the panel loose from the door. whille pulling on the sides of the panel, look inside of the panel to see if you can locate the pop in fasteners. When located, you'll have to have a screw driver, or similar object to pry the panel off of the door. (some of the fasteners might break, but are available at the part store) After the panel is loose, be careful of the door release handle, and with the window in the down position, take all of the switches loose from the panel and carefully raise the panel up and out.I hope that this is helpfull.

Jan 03, 2011 | 1999 Chevrolet Express

1 Answer

WHAT WILL IT COST TO REPAIR REAR WHEEL BEARINGS ON A 1999 PLYMOUTH GRAND VOYAGEUR


should coast u the part plus one hour labor,,,depends on where u live too,some labor rates are,,45 to 80 a hour,,then they jack the part up to,,

May 15, 2010 | 1999 Plymouth Grand Voyager

1 Answer

How to replace interior door latch on elantra?


Remove any and all screws from the door panel, including removing lock and window controls. then take a large flat-tipped screwdriver and pry off the panel all the way around. FInally lift panel up and off the door. Now you will have access to the inside of the door. Everything from here is self explainable.

Dec 07, 2009 | Hyundai Motor 1999 Elantra

1 Answer

Change window gear on 99 civic


this is from a 97 civic should be the same. remove the door panel. remove 1 screw and pull handle, remove 1 screw and plastic cover over door opener handle. remove speaker cover and three screws underneath. remover window crank. then remove the door panel (held on with plastic plugs...just pull panel toward youself).
8e9dc4a.jpg
e838839.jpg
to remove the regulator ("window crank gears") Remove the glass held in with two 10mm bolts. The regulator itself is held in with six 10mm bolts. Remove these bolts and remove the regulator. (installation is reverse). Note: pay attention to the Idler arm track (highlighted in green) I think this one is directional (the front has to be at the front and the back has to be at the rear)

5a5e384.jpg

Feb 23, 2009 | 1999 Honda Civic

Not finding what you are looking for?
1999 Plymouth Voyager Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...