Question about 1990 Honda CRX

1 Answer

How do i change a clutch in a 1990 honda civic crx step by step?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Honda Expert
  • 268 Answers

There's no trick to it, this is not in perfect order but it will help... You have to jump in, don't be afraid. Everything is just nuts and bolts. Drain the gear oil out of the trans, disconnect everything in the way, remove starter, all trans bolts, remove outer tie-rod bolt and pop the joint, remove lower control arm bolt on each side and pop the joint, (DON'T HAMMER THE THREADS ON THE BALL JOINTS, SMACK THE THICK METAL ON THE SIDES OF THE KNUCKLE / SPINDLE UNDER THE RUBBER BALL JOINT SEAL AND THE JOINT WILL POP OUT) push suspension up and pop out the axles. Remove motor mounts that connect to your trans. Pull the trans out or pry it carefully, MAKE SURE EVERY BOLT IS OUT. You'll also need to prop the engine up with a jack and something soft like wood or layers of cardboard. The trans will slide out but it's a few inches then it will want to drop so have something under it like a skateboard or a creeper with layers of cardboard to protect both. Don't let it slam down and hit the spline coming out of the engine. Your new clutch kit will have instructions and an alignment tool in the package to complete the clutch install. Then slap it back together. Could take 5 hours your first time, about 2.5 next time.

Posted on Sep 29, 2009

Testimonial: "thanks cuz i had no idea how to do that this will help me out alot"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a d15b7 water pump be compatiable with a d16y8 water pump


I hope this helps, it all I could find.

1991

CRXL4 - 1.5L 1493cc type D15B2 - MFI GAS SOHC
2 vehicles
1988 - 1989

CRX 1500 HFL4 - 1.5L 1493cc - MFI GAS SOHC
3 vehicles
1988 - 1990

CRX DXL4 - 1.5L 1493cc type D15B2 - MFI GAS SOHC
2 vehicles
1990 - 1991

CRX HFL4 - 1.5L 1493cc type D15B6 - MFI GAS SOHC
4 vehicles
1988 - 1991

CRX SIL4 - 1.6L 1590cc type D16A6 - MFI GAS SOHC
4 vehicles
1988 - 1991

CivicL4 - 1.5L 1493cc - MFI GAS SOHC
1 vehicles
1988

Civic 1500 DXL4 - 1.5L 1493cc - MFI GAS SOHC
4 vehicles
1988 - 1991

Civic 4WDL4 - 1.6L 1590cc type D16A6 - MFI GAS SOHC
3 vehicles
1989 - 1991

Civic CXL4 - 1.5L 1493cc - GAS
4 vehicles
1992 - 1995

Civic CXL4 - 1.5L 1493cc type D15B8 - MFI GAS SOHC
4 vehicles
1988 - 1991

Civic DXL4 - 1.5L 1493cc type D15B2 - MFI GAS SOHC
4 vehicles
1992 - 1995

Civic DXL4 - 1.5L 1493cc type D15B7 - MFI GAS SOHC
3 vehicles
1993 - 1995

Civic Del Sol SL4 - 1.5L 1493cc type D15B7 - MFI GAS SOHC
2 vehicles
1990 - 1991

Civic EXL4 - 1.6L 1590cc type D16A6 - MFI GAS SOHC
4 vehicles
1988 - 1991

Civic LXL4 - 1.5L 1493cc type D15B2 - MFI GAS SOHC
4 vehicles
1992 - 1995

Civic LXL4 - 1.5L 1493cc type D15B7 - MFI GAS SOHC
1 vehicles
1988

Civic SEL4 - 1.5L 1493cc - GAS
3 vehicles
1989 - 1991

Civic SIL4 - 1.6L 1590cc type D16A6 - MFI GAS SOHC
2 vehicles
1992 - 1993

Civic VXL4 - 1.5L 1493cc type D15Z1 - MFI GAS SOHC

Jul 11, 2011 | Honda Civic Cars & Trucks

2 Answers

1990 honda crx water pump


do you have any technical knowledge to do it your self.

Sep 30, 2008 | 1990 Honda CRX

1 Answer

Hi, I have a 1990 honda civic LX, the speedometer doesn't work and the check engine light is on, but the gauges work and no fuel is blown. Could you tell me what could be the problem?


check and see if the cable from the back of the speedo is connectedto the top of the transmission .I have had the same problem with my 91 crx and thats what it was.hope this helps

Feb 03, 2011 | 1990 Honda Civic

2 Answers

1990 crx base model honda civic want start


I would suggest an ignition module. If it is a rough idle at startup I would check the throttle position sensor. You can check that by starting the car and unplugging the TPS. If the car runs differently then chances are it is working fine.

Dec 04, 2009 | 1990 Honda CRX

1 Answer

I have an A1 transmission in my car ...the clutch just went out and i cant find **** about it ...can someone please tell me some info about the clutch that goes in it ..its a 1994 honda civic del sol b16a...


212 spine. It depends there are three different types. You need to pull it out and check to order a new one. eBay has loads once you know whch one it is either 19,20 or 21mm.

Vote for me :)

Oct 12, 2009 | 1990 Honda CRX

1 Answer

My 1990 honda crx clutch is very hard, after i changed it.. i have a crx transmission and 1999 civic engine. should i have bought the clutch for the transmission or the engine?


Generally that stiffness is due to a failed clutch cover (engine side). the pressure fingers inside lose their ability to compress and throw out sufficiently. I have had mixed results with aftermarket pressure plates as many are stiff right out of the carton. If you can afford,use honda oem parts for best results and dont forget to include the bearing

Jul 24, 2009 | Honda CRX Cars & Trucks

1 Answer

1991 honda crx si m/t almost impossible to shift after it warms u


Have you adjusted the clutch cable enough to allow it to disengage the clutch ? try that first. Is this the original clutch?

Jun 11, 2009 | 1990 Honda CRX

2 Answers

Switching transmissions


First make sure you know what your trany came out of . honda did not go hydro until 92 all i do are honda swaps . get on e-bay they offer a kit or you will need clutch master and slave cylinder and the lines out of a doner car .Good luck and hope this helps you!

Jan 26, 2009 | 1991 Honda Civic

1 Answer

Tranny Problems


yes it will fit but get a new clutch

Oct 17, 2008 | 1990 Honda CRX

Not finding what you are looking for?
1990 Honda CRX Logo

1,169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...