Question about 1996 Jeep Grand Cherokee

2 Answers

Check engine light milleage at 152k vechicle does not appear to be running or driving any different

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 743 Answers

Check engine light usually refers to emissions. If you would take it to Auto Zone they will run the code on it and tell you what it is for free. You might see an improvement in your gas mileage if you take care of this problem.

Posted on Sep 29, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Most larger parts stores will do a code check for you for free. get the code and reference it in either chiltons or haynes manual and see what system is causing the code, then, go from there. Most codes that don't cause poor running are made by o2 sensor. Without proper testing, (essential to beginning any repair) I'm guessing...let me know how close I am!

Posted on Sep 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 jetta 4 cyl runs very rough, and firing order seems to be misfiring? engine is not overheating, although once warmed up it lags while excellerating. Noticed that it appears that sparking or arking...


Check timing of the engine is right using an engine timing light. Make sure the timing belt or chain isn't worn or slack. The head gasket could also have gone and may need replacing.

Feb 15, 2014 | 2001 Volkswagen Jetta TDI

2 Answers

Had check engine and AT light come on going down hill today. need help diagnosing


Likely an issue with the transmission. Check the transmission oil level with the engine running. If too high or low, then have a garage check your system. The 6 is sometimes prone to obvious transmission wear around 150,000 plus km.

Oct 30, 2012 | 2007 Mazda 6 2.3

1 Answer

Check engine light constantly on, now periodic blinking and car is choking


You need to have the systems computer scanned for trouble codes.

Jun 10, 2012 | 2002 Ford Windstar Cargo

1 Answer

Ecu box passat


ecm goes bad it will go in limp mode, vechicle will run poorly check engine light will stay on vechicle wont start.you need to use a code scanner check for ecm fault code, if check engine light not turning on when you start vechicle could have blowed ecm fuse or wiring problem, could have loose connection at ecm electrical connector or ecm getting poor ground but first check for a defective ecm using a code scanner.

Jan 23, 2012 | Volkswagen Passat Cars & Trucks

1 Answer

1999 jeep cherokee sport stalls and bucks while driving


you need code scan vechicle if check engine light is turning on.many things cause vechicle surge while driving like faulty tps sensor, faulty mass air flow sensor.clogged fuel filter,faulty egr valve, faulty torque converter clutch solenoid. best code scan vechicle save time and money from guessing.

Nov 06, 2011 | 1999 Jeep Cherokee

1 Answer

Nissan for year 2000 what all vehicles had a 3.3l engine and did they all use the same computers ecms/ecus and is there a way to modify them with chips or anything? i have a 2000 xterra that was made 4/99


THE 2000 FRONTIER HAD THE 3.3 ENGINE BUT COMPUTER SET UP DIFFERENT.SOME STATES YOU CANT MODIFY TAMPER WITH EMISSION CONTROL DEVICES MAKE VECHICLE RUN FASTER I WOULD VECHICLE AS IS.TRYING CHANGING VECHICLE OPERATION COST LOTS MONEY SPENDING AND HEAD ACHE VECHICLE MIGHT NOT RUN WELL.

Oct 22, 2011 | 2000 Nissan Xterra

1 Answer

How to check transmission fluid on a audi a3 1997


IF TRANSMISSION DONT HAVE FILLER TUBE AND DIP STICK.YOUR VECHICLE HAS LEVEL CHECK PLUG ON TRANSMISSION OIL PAN TOWARD EXHAUST END.YOUR VECHICLE HAS TO BE LIFTED UP LEVEL ON JACK STANDS.ENGINE HAS TO BE RUNNING.AND TRANSMISSION FLUID TEMPERATURE HAS TO BE 95 TO 113 DEGREES. SHIFT TRANSMISSION THROUGH ALL GEARS TWICE THEN BACK TO PARK.MAKE SURE ALL DRIVE WHEELS OFF THE GROUND AND VECHICLE IS FIRM AND SECURE ON JACKSTANDS.WHILE ENGINE RUNNING REMOVE LEVEL CHECK PLUG.REAR OF TRANSMISSION PAN. IF TRANSMISSION FLUID DRIPS YOUR FLUID LEVEL OKAY.IF TRANSMISSION FLUID POUR OUT CHECK PLUG HOLE YOU HAVE TOO MUCH FLUID IN TRANSMISSION.IF NO FLUID COME OUT ADD TRANSMISSION FLUID RIGHT SIDE OF THE TRANSAXLE IN FRONT OF THE DRIVE SHAFT.WARNING THIS VECHICLE TRANSMISSION FLUID SUPPOSE TO BE CHECKED AT A GARAGE ON LIFT. YOU CAN CHECK FLUID AT HOME IT IS DANGEROUS THE ONLY THING YOU NEED TO MAKE SURE VECHICLE ON SOLID LEVEL GROUND AND JACKSTAND SECURE SOLID NO MOVEMENT WHAT SO EVER.

Dec 13, 2010 | Audi A3 Cars & Trucks

1 Answer

Check engine light comes on after car is running and service 4 wheel drive is on


SOUND LIKE VECHICLE SPEED SENSOR PROBLEMS. SINCE IT CONTROL TRANSFER CASE SHIFTING.BUT TAKE VECHICLE TO A GARAGE HAVE IT CHECK.YOU COULD HAVE A ELECTRICAL OR MECHANICAL PROBLEM WITH THE 4WD SYSTEM.GARAGE HAS DIAGNOSTIC EQUIPMENT TO SEE WHATS MALFUNCTION.

Sep 08, 2010 | 1994 Jeep Grand Cherokee

1 Answer

The dash indicator light is on showing the


YOUR CAR IS IN THEFT SECURITY MODE.TRY USING DIFFERENT KEY.IF ANOTHER KEY DONT WORK.YOU HAVE PROBLEM IN THE SWITCH AND BCM.TO GET CAR TO STARTED TURN THE IGNITION WITH KEY IN TO ON POSITION WITH ENGINE OFF FOR 10 MINUTES.WATCH THE PADLOCK.IF IT TURNS OFF.TURN OFF IGNITION SWITCH FOR 5 SECONDS.THEN TRY TO START ENGINE.IF ENGINE STARTED PROBLEM IS IN THE IGNITION SWITCH AND BCM.IF YOU GET VECHICLE RUNNING NOT SAFE TO DRIVE BECAUSE THE VECHICLE WILL GO IN THEFT MODE SHUT OFF YOUR FUEL PUMP WHILE YOU ARE DRIVING IN HEAVY TRAFFIC. DONT LET GO GET IT FIX FOR YOUR AND FAMILY SAFETY.

Apr 25, 2010 | 2003 GMC Yukon XL

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...