Question about 2005 Saturn ION

1 Answer

My power windows are not working on the drivers window controls only (all controls). Where should I start looking?

Posted by on

  • john_hutchin Sep 30, 2009

    Found the problem in the wiring. I pulled back the boot in the door and the wires were cut. Sounds like a common problem.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,865 Answers

Check the wiring connections at the switches that do not work

Posted on Sep 29, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: 2004 Expedition Power Window problems and power seat

Hopefully by now you have resolved your problem but my truck had that problem and I had to replace the motor for the window controls.

Posted on Nov 19, 2008

  • 4 Answers

SOURCE: 1999 Buick Century - passenger side power window does not work

Replace the Driver side window switch. These have a corrosion issue.

Posted on Apr 01, 2009

  • 2 Answers

SOURCE: 2003 toyota corolla sedan - power window stuck

u have to open the door pad for inspection of power winow motor and linkages

Posted on Apr 17, 2009

mcgyver468
  • 710 Answers

SOURCE: power windows

THERE IS A WINDOW LOCK BUTTON ON THE DRIVER WINDOW SWITCH PANEL. IF THIS IS PRESSED ONCE IT SHOULD ALLOW THE OTHER PASSENGER SWITCHES TO OPERATE. IF IT WON'T ALLOW THE PASS. BUTTONS TO WORK THEN THE LOCKOUT BUTTON MUST BE DEFECTIVE. HOPE THIS HELPS YOU. KEEP ME POSTED PLEASE. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD LUCK

Posted on May 18, 2009

  • 1810 Answers

SOURCE: 2003 Chevy Tahoe. Driver's side power window

check releys and wires in door jam 1 might be broken failing that u need a new switch

Posted on Jan 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Power windows stop working


start with the fuses replace it anyway or put a 12volt bulb in place of fuse , when its loading down it will shine bright , when normal it will not shine much at all.
be sure all connections to battery are working check for a second positive cable with a f useable link

May 03, 2015 | Cars & Trucks

2 Answers

2007 toyota tacoma started truck this morning windows all went down started driving now noticed no windows will work at aall on all doors.the doors power locks work but no power any of the windows on all...


There is a Power Window Relay labeled P/W Relay. Located under the hood, bottom right hand corner of the relay / fuse block. There is a 50A fuse feeding the PW relay. After the relay there are individual fuses for each window.

Loss of ground from the Drivers Door window switch bank could also disable the windows. The window switch should ground by your left foot, under the plastic somewhere.

Feb 09, 2015 | 2007 Toyota Tacoma

1 Answer

The windows on my crv wont work


at all stations?
all fuses, in both boxes. (did you read the operators guide to find them,
some cars have a circuit break (thermal) for windows,
and is located in the fuse box.
all this info is at alldata.com
ill look. ill respond , as you are a pro DIY person, can read schematics. if not , its just a guessing game.
IT IS a FUSE, not a breaker. but each motor in door has CB.
UNDER HOOD 40am Fuse #13
then fuse 23 underdash and fuse 8 same.
then the relay.same place.
and the relay is controlled by, master station (drivers)
the driver location doesnt need the relay to work.
the relay feeds power to all other window controls
so the master station is unique.
log in to alldata.com and see the pages on power windows.
here are some tid bits.
battery pull warning

Resetting the power window control unit is required after performing the following procedures: Disconnecting the battery, Removing the No. 6 (7.5 A) and/or the No. 23 (20 A) fuses from the under-dash fuse/relay box or disconnecting the driver's door wire harness.
and
window relearn/reset.
Control Unit Reset
  1. Turn the ignition switch ON (II).
  2. Move the driver's window all the way down by holding the driver's switch firmly down; when the window reaches the bottom, hold the driver's window switch firmly down for 2 seconds.
  3. Move the driver's window all the way up by holding the driver's switch firmly up; when the window reaches the top, hold the driver's window switch firmly up for 2 seconds.
  4. If the window does not work in AUTO, turn the ignition switch OFF and repeat the procedure.
  5. Check the window and power door lock operations

Jan 12, 2014 | 2006 Honda CR-V

1 Answer

All power windows quit working at same time in the up position.


check the main window switch on the driver door even the lock out switch that controls the other windows on the driver door that be the place i start

Feb 08, 2013 | 1996 Ford Explorer

2 Answers

The passenger side brake light, and passenger side (front and back) window control doesn't work is it a fuse?


Well, the short answer is no.
The lights and windows are are different fuses.
There's a slight chance you have a problem with a ground wire on that side, but I doubt the two problems are related.
I would check the light for power and ground, and look at the window switches for power and ground. The windows are powered thru the driver switch on most cars.

Jul 17, 2012 | 2004 Oldsmobile Alero

1 Answer

MY 2006 DOdge ram Thunder Road's windows dont work. They used to work i bought the truck new. All of a sudden all the windows from every control dont roll down their own windows as well as the driver side...


your truck also has power relays working with the fuses. each door has its on circuit except the main controller in drivers side door. if u cannot control anything from drivers side then look at the relays for possible cause to your problem.

Apr 22, 2010 | 2006 Dodge Ram

4 Answers

Window problem


Might want to check the doors with the problem windows for a broken wire from the door to the door jam.

The window lock switch is a single circuit to all the other windows, so if there was a problem with it, none of the window controls would work ( but the driver's side would still operate them ).

The other place to check for a broken wire is the driver's side door to a-pillar harness. The circuits for the other windows run through the driver's side switch. Could be a wire in the driver's side door harness.

The other item could be the driver's side switch, the contacts will get carbon built up on them, and the windows will not operate anymore.
This is what mine looked like when the driver's side window stopped working ( lower left hand corner of the picture is the driver's side window switch, note the carbon build up on the contacts )
ccfb7fb.jpg

I would start with checking for broken wires, by metering the window switch for power.

The back passenger's window switch should be getting power & ground on the white w/ yellow stripe wire and the tan w/ light blue stripe wire.
in the "at rest" position on the driver's side switch, these are supplying ground to the power window, and power is being applied to the other side of the motor ( depending on direction of travel ).
792a56e.jpg

Apr 05, 2010 | 2004 Ford F150

1 Answer

All power windows inoperative


Check the wiring bundle going into the drivers door by pulling back the rubber cover look for broken wires, all window controls pass through the drivers door before going to the others.
My local salvage yard was able to fix me up with a good useable bundle.
Jeep dealer was not able to get it.

Apr 11, 2009 | 1994 Jeep Grand Cherokee

1 Answer

Only Drivers Power window works


well if the drivers side window controll works but the others don't it doesnt look like a fuse or a relay problem. My advice is to check and see if the wireing clips for the window is conected. You would have to take off the door panel wich is held on by 3 or 4 screws and a few plastic clips, check both sides if they are connected you may have a break in the wire somewere or your window regulator motor could have gone bad. If they aren't connected just push them together an they should work.

Oct 10, 2008 | 2002 Dodge Neon

Not finding what you are looking for?
2005 Saturn ION Logo

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...