Question about 2003 Ford Focus

1 Answer

2003 focus st170 revised timing needed - 2003 Ford Focus

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 1,757 Answers

Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt/MARK(S) Diagrams that you will need, complete with Instructional and Directional Diagrams.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2003/make/ford/model/focus/2003_ford_focus_timing_belt_diagram_marks.htm

Posted on Mar 28, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My focus st170 stutters and hold back after 4000 revs and up.


to many things can be wrong you need to get a diagnostic

Apr 08, 2010 | 2003 Ford Focus

1 Answer

The tyres on my focus st170 are wearing on the inside the tracking is ok


you have a toe out condition that is causing your tire wear. get to an alignment shop and have your front end checked

Mar 13, 2010 | 2003 Ford Focus

1 Answer

Ford Focus, 2003 - Leak in drivers footwell


drain through the firewall ,its blocked ,look for outlet and clean the end of the pipe

Nov 15, 2009 | 2003 Ford Focus

1 Answer

My focus st170 oil temp gauge is on the red what is causing this


Hi mate.

This could be caused by low oil level.

If this is not the case and you have the correct amount of oil, then I would suspect the sender unit ( maybe the wire has come off) or the oil pump has given out and needs replacing.

Until you sort this problem do not use the vehicle as you may damage the engine through lack of lubrication.

Ray

Sep 01, 2009 | 2003 Ford Focus

1 Answer

I am having problems compressing my rear caliper pistons on a 2003 ford focus 2.0 st170 how do i go about doing this?


Simple!

Use a large C-clamp and a piece of wood. Slowly tighten the c-clamp and it will compress the piston. Just remember, do this slowly so yopu don't have you master cylinder overflow.

Mar 21, 2009 | 2003 Ford Focus

2 Answers

Why is my oil tempriture showin that its cold most of time even though car has been runnin 4 hours on my focus st170


you dont have an oil temp guage,,,,its for your oil level you may want to have you oil checked.to make sure you have the right amount in it

Oct 26, 2008 | 2003 Ford Focus

1 Answer

Replace bulb ford focus


i have a 2003 st170 and to replace my bulbs you have to release the flaps on the back of the light by pushing the metal clip down. remove the cover completely.
on the bulb will be a metal clip i think if you push the end which will be towards the wing of the car down and then it will swing towards you and release the bulb.
remove bulb and replace with new.
try not to handle the bulb with your bare skin use a tissue to handle it with.
when fitting the new bulb make sure you get the groove in the bulb inline with the one in the housing this way the bulb will sit in the correct position its easy enough.

repeat for the opposite side... im not sure about your car but with the st170 you have to remove the battery in order to replace the drivers side bulbs.

i hope thats of some help to you.

Oct 25, 2008 | 2003 Ford Focus

Not finding what you are looking for?
2003 Ford Focus Logo

Related Topics:

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...