Question about 2004 Mitsubishi Galant

1 Answer

Egr flow not sufficient. how does one fix this . service engine soon light came on

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 5,763 Answers

First make sure egr valve works.with engine running aply vacum to valve, if idle drops,valve is ok.if not you may have a bad valve or possible carboned up egr passage.

Posted on Sep 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Chevy Venture. "Service engine soon" light on. Code PO401. I believe EGR passage in plugged. Will GM&#;s Top Engine Cleaner work?


diagnostic aids:
a vacuum restriction to the map sensor--a skewed map sensor reading can cause the PCM to read an incorrect MAP change during the EGR flow test
an engine that is running poorly due to mechanical condition such as worn piston rings, ect. can cause low engine vacuum thus EGR flow test will fail
excessif backpressure of the exhaust system can cause P0401
exhaust system leak can cause an insufficient amount of EGR flow
a restriction in the intake manifold such as carbon deposit and casting flash.

Nov 22, 2014 | 2004 Chevrolet Venture Passanger

1 Answer

1998 Ford Escort - P1405 Error code


Follow the link for help with this fault code P1405 Ford DPF EGR Sensor Circuit High Voltage Detected

I suggest you replace the EGR valve position sensor.

Mar 10, 2017 | 1998 Ford Escort

1 Answer

Ford Escort P1405 Error Code


Are you sure you have EGR flow?? Hold the EGR valve open the engine should run poorly, if not you have no flow.

May 31, 2012 | 1998 Ford Escort

2 Answers

P1401


Without all the technical detail -your EGR Valve is bad

May 30, 2012 | 2001 Lincoln Navigator

4 Answers

Grand carvan gives p402 code


This is not a cut and dry fault code. This means that more than one thing wrong can set the code in the computers memory. Here is the low down on the P0402 fault code. This is from the OBD2 fault code diagnostic book.

P0402 - Exhaust Gas Recirculation Flow Excessive Detected
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- Possible engine hesitation
Possible causes - EGR solenoid valve harness is open or shorted
- EGR solenoid valve circuit poor electrical connection
- EGR volume control valve stuck closed
- Dead (Weak) battery
- Faulty EGR temperature sensor and circuit
- Faulty EGR Valve
- EGR passage clogged
- Exhaust gas leaks

Jan 18, 2012 | Cars & Trucks

1 Answer

1998 Buick Century Custom 3.1--service engine soon light is on, I check the computer and it says EGR insufficiant flow code P90401. I changed the egr valve lite still on. Went back to Autozone checked...


well I'm a mechanic and you just told me what's wrong....
now all you have to do to fix it is test all parts listed replace the one (s) that fail test....

May 14, 2017 | Buick Century Cars & Trucks

1 Answer

Service engine soon light came on about two weeks ago... code P0401. Changed gas cap, egr valve and dpfe sensor. Also took throttle body off and cleaned with carb cleaner. Erased code aswell, light came...


P0401....Exhaust Gas Recirculation Flow Insufficient Detected

best advice with the EGR valve problem is to make a gasket with a coca cola can and sel it off completely

May 04, 2011 | Ford F-150 Cars & Trucks

1 Answer

What does the check engine code p0406 mean on my dodge caravan with a 3.3L engine?


P0406 - Exhaust Gas Recirculation Sensor A Circuit High
An improper voltage signal is sent to ECM through the valve

Early Models : The EGR valve control the amount of exhaust gas routed to the intake manifold. Vacuum is applied to the EGR valve in response to the throttle opening. The vacuum control the movement of the taper valve connected to the vacuum diaphragm in the EGR valve.

zjlimited_279.gif

Late Models : The EGR volume control valve uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECM. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECM does not issue the pulse signal. A certain voltage signal is issued so that the valve remains at that particular opening.

zjlimited_280.gif

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine hesitation

Possible causes
- Harness or connectors (EGR volume control valve circuit is open or shorted.)
- EGR volume control solenoid valve
- EGR temperature sensor and circuit

Possible solution
- Repair EGR harness or connector
- Replaced EGR volume control solenoid valve
- Replaced EGR volume control valve


Hope helps (remember to rate and comment this answer).

Mar 31, 2011 | Dodge Caravan Cars & Trucks

2 Answers

Engin light #po406 2005 ram quad cab


P0406 - Exhaust Gas Recirculation Sensor A Circuit High

Early Models : The EGR valve control the amount of exhaust gas routed to the intake manifold. Vacuum is applied to the EGR valve in response to the throttle opening. The vacuum control the movement of the taper valve connected to the vacuum diaphragm in the EGR valve.

zjlimited_230.gif

Late Models : The EGR volume control valve uses a step motor to control the flow rate of EGR from exhaust manifold. This motor has four winding phases. It operates according to the output pulse signal of the ECM. Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes, changing the flow rate. When no change in the flow rate is needed, the ECM does not issue the pulse signal. A certain voltage signal is issued so that the valve remains at that particular opening.

zjlimited_231.gif

Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Engine hesitation

Possible causes
- Harness or connectors (EGR volume control valve circuit is open or shorted.)
- EGR volume control solenoid valve
- EGR temperature sensor and circuit

Possible solution
- Repair EGR harness or connector
- Replaced EGR volume control solenoid valve
- Replaced EGR volume control valve
When is the code detected?
- An improper voltage signal is sent to ECM through the valve


Hope helps.

Mar 06, 2011 | 2005 Dodge Ram

2 Answers

Ford explorer 2002 v-8 code po401 low flow on obd-2


Replacement engine put in with 51000 miles and now the engine light is on and the speedometer goes from 50 to 0 and then jerks

May 31, 2008 | 2002 Ford Explorer

Not finding what you are looking for?
2004 Mitsubishi Galant Logo

374 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...