Question about 1999 Jeep Grand Cherokee

3 Answers

Grand Cherokee 1999 - ABS light went on solid ?

Hello Guru,

My Brakes feel good, Brake Fluid is fine. Check Gauge light is on. ABS light went on solid with a ding. Is driving this Dangerous, Please Help.
Thank you . Howard Ca.

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 312 Answers

If the ABS light is on it is indicating a problem with the ABS system, not the mechanical braking system. Your brakes will still operate but not the ABS. So basically you'd need to go back to the old fashioned way of pumping the brakes. You'll probably need a new ABS sensor.

I wouldn't drive to long without getting it fixed because you may inadvertantly revert back to your familiarity and just stomp the brakes resulting in them locking up when you expect them to operate as normal.

Posted on Sep 29, 2009

Ad

Not necessarily but the Check and ABS are there to tell you something. Take me to the repair shop fairly soon and correct

Posted on Sep 29, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 101 Answers

Check your Fuses associated with ABS and brakes I know my vehicle abs light goes on if a fuse is blown... do you tow with this vehicle ... trailer wiring can also short wires and blow fuses

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 Jeep Cherokee 4.0L 4WD. Recently I replaced the rear brakes (drums, shoes, hardware kit, automatic self adjusting kit) on both sides. The brakes worked fine for a little while (probably


what are the symptoms.? there are over 20. or so.
  1. leaking DOT 3/4 fluid. , at every inch of the way, in system.
  2. stopping distance increased.
  3. pulling (steering changes as you brake)
  4. locked up brakes, 1 or any of all 4.
  5. noise
  6. ABS OR traction control (stability) lamps glowing
  7. ABS failure. of any kind.
  8. DTC errors, from the scan tool related to brakes.
  9. no hard pedal,
  10. pedal drifts to the floor.
  11. spongy brakes.
  12. pedal play is wrong , or height.
  13. power assist part of brakes , inactive.
  14. DoT 3/4 fluid levels keep dropping.
  15. rusty brake lines
  16. brake hoses cracking.
  17. im sure there are more, ....

Oct 24, 2014 | 1999 Jeep Cherokee

1 Answer

IS it safe to drive your jeep liberty with the ABS light and Brake light on. It seems to be running fine, but I am afraid of doing more damage.


I would not be concerned so much with the ABS light, but the brake light needs to be investigated-does the petal feel the same? Is the brake fluid full? If both are alright, you only do not have ABS, which is not as critical, but if you have any issues with a different petal feel or low on brake fluid, it needs to be looked at immediatly.

Dec 23, 2010 | 1997 Jeep Grand Cherokee

2 Answers

I have a 2001 Jeep Grand Cherokee Laredo, 6 cylinder 4WD vehicle. I replaced the left rear brake caliper. I bled the brakes but the ABS light and brake light won't go off. The brakes are a little...


JEEP VECHICLES 2001 MODELS AND UP HAS TO BE BLED USING A DRB BLEED TOOL.YOU HAVE TOW VECHICLE IN.MOST TIME YOU CAN TRY MANUAL BLEEDING BUT BRAKES WILL BE SPONGY AND ABS LIGHTS WILL TURN ON.THE DEALERSHIP HAS TO BLEED IN ORDER TO GET GOOD SOLID BRAKES AGAIN.

Nov 08, 2010 | 2001 Jeep Grand Cherokee

1 Answer

Brake and ABS light comes on. what does that mean?


Brake system fault. Must troubleshoot. Recommend starting with brake fluid reservoir. Then check all brakes for leaks.

Aug 25, 2010 | 1999 Jeep Grand Cherokee

1 Answer

I put the car in gear this morning and the abs service vehicle and trac off light came on and won't go off I also fixed a small leak on the tranny


CHECK TO SEE IF YOU HAVE TRANSMISSION FLUID ON FRONT BRAKE ROTOR OR BRAKE PADS.IF BRAKES CONTAMINATED THE TRAC LIGHT AND ABS LIGHT WILL COME ON.IF ALL LOOKS GOOD LET DEALERSHIP CHECK OUT THE ABS BRAKES AND TRAC SYSTEM.THEY HAVE TO USE DIAGNOSTIC EQUIPMENT TO FIX THE PROBLEM.

Mar 24, 2010 | 1999 Pontiac Grand Am GT

1 Answer

Driver side brake not bleeding properly after bleeding left side and changing rotors, calipers, and pads?


first of all make sure master cylinder is full of brake fluid.then you crank car leave foot off brake pedal. watch abs light on dash it should turn off in 10 seconds if not have car towed to garage or dealer. they have to use a scanner to scan the abs brakes if abs light turn off in 3 seconds. then starting bleeding from master bleed the lower brake line fitting at the proportional valve followed by the upper brake line fitting. keep eye on brake fluid in mastercylinder dont let run dry.next prime the abs hydralic modulator.connect the bleeder hose to the rear bleeder valve on the modulator.place the other end into a container partially filled with cleab brake fluid.make sure the end of the hose is submerged.open the bleeder valve slowly about 1/2 to 3/4 turn have an assistant depress the brake pedal and hold it in the depressed position. when the flow of fluid ceases close the bleeder valve.repeat process until no air bubbles are present in the fluid.then tighten the bleed valve securely. start bleeding brakes. your bleeding sequence is right rear - left front - left rear - right front.WARNING IF ALL FAILS YOUR BRAKES DONT FEEL SOLID AND FEEL VERY SPONGY.DONT DRIVE CAR. HAVE IT TOWED TO DEALERSHIP.THEY WILL HAVE TO PRESSURE BLEED YOUR BRAKE SYSTEM.

Nov 17, 2009 | 1999 Oldsmobile Alero

1 Answer

1999 jeep grand cherokee abs light has come on.what to do?


actually it could be something as simple as low on brake fluid. check this and then check to make sure you do not have worn brake pads on the tires this can also set a code when one tire stops quicker than the other

May 09, 2009 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

1,062 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...