Question about 2009 Hyundai Genesis

1 Answer

How do I change the 3rd brake light on a 2004 Hyundai Getz (without spoiler).

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,986 Answers

The light housing will either be clipped in and you will need to gently pry on the housing to open it, or you will be able to unscrew the housing through the trunk itself

Posted on Sep 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change stop light globe on 2008 hyundai getz


Remove the two 10 mm (head) bolts that hold the stop light. This bolts are between the tail light assembly and the tail gate weatherstrip. You can see them without having to remove anything.

By using a masking tape wrapped flat screwdriver, pry "back" the whole tail light assembly. Once out, you can twist the brake light (or reverse, or turn signal) bulb plug, remove and replace the bulb.

The Getz uses standard two filament brake globes (1/4 turn to install).

May 12, 2014 | 2008 Hyundai Getz 1.6

1 Answer

I have a 2007 Infiniti G35s sedan. I installed an OEM spoiler & spliced the spoiler wires to the 3rd brake light wires. Non of the brake lights work now including the 3rd & spoiler. What did I do?!...


Sounds like you have lost ground somewhere along the way. might try running a ground from spoiler to frame or simply replacing wires back to original and trying again. Would put my money on a ground wire. good luck

Aug 12, 2012 | Cars & Trucks

1 Answer

How to replace rear brake light hyundai getz 2004


Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

May 15, 2011 | Hyundai Motor 2004 Accent

1 Answer

How to replace 3rd brake light on 2004 Chrysler Pacifica?


the 3rd brake light is mounted to the spoiler. you need to remove the spoiler from the liftgate to acces the mounting bolts and the wire clip. there are five points of attachment of the spoiler,four hex nuts (metric) and one snap clip. two are accessable when the liftgate is open, they are in the corners of the liftgate. two more are under the upper rear window interior trim. the interior trim is held on by snap clips. if you pry outward on the trim starting on the right side of the window and work your way toward the middle you will be able to gain access to the two other nuts. once you have removed all four nuts, then close the liftgate and remove the spoiler by lifting up to disengage the last attachment point (snap clip). you will then need to change the light by removing the two nuts and disconnecting the wire clip. re-instal is the opposite of above. make sure that the wire for the third brake light does not get pinched when installed. (mine was improperly installed from the factory and the wire was pinched and this may have been why there was an early failure of the light)

Feb 18, 2010 | 2004 Chrysler Pacifica

1 Answer

High Level Brake bulb replacement


If memory serves, there are two screws holding this light assy to the rear package deck. They are covered (LH and RH side of this assy). remove the covers and using a phillips screwdriver, remove the screws and lift the assy up and away from the rear glass. you now have access to the bulb and socket.

May 18, 2009 | Hyundai Motor 2004 Accent

1 Answer

How do you replace the brake light on the rear spoiler on a 2001 Hyundai Accent?


This is the Spoiler Dude. The spoiler light is attached with screws to the spoiler. You must remove the screws and then the spoiler light will come away from the spoiler. Clip the two wires ( Black & Red ). Attached the new spoiler light ( I can get that for you) with a sleeve. Test the new light with the brake pedal depressed. Screw in the new light and that is it. If you have any questions.
Call Spoiler Dude Paul
719-661-8600
www.spoilerdudepaul@gmail.com

Apr 20, 2009 | 2001 Hyundai Accent

3 Answers

Can't get the spoiler, that holds the 3rd brake light on the off


regarding chevy equinox spoiler there are three 10mm bolts one on each end and one in the middle then there are three pins in the middle that snap in. these are very difficult to release without breaking them. If they break use a two part adhesive sparingly to hold the spoiler down or it will hit when you open the hatch.

Apr 05, 2009 | 2005 Chevrolet Equinox

1 Answer

How do I change the bulb 2004 infiniti high mount bake light?


Unfortunately, these are not very simple. If you have a factory high mount brake light-meaning not one in a spoiler, you have to remove the rear seats, the rear parcel shelf and then the 3rd brake light. the 3rd brake light I believe is an LED setup which get replaced as an assembly which inserts into the housing. If you need further guidance let me know.

Thanks,

Brian

Dec 10, 2008 | 2005 Infiniti G35

1 Answer

Brake Light


hi from uk to change the brake light bulb/s on the getz is easy just open rear hatch then you will see 3x pozi drive screws alongside each lamp assy that screw /secure the lamp to body at the lower endof drain channel? remove screws and lift away lamp from body each bulb is accessable then now would be a good opportunity to clean the area at rear of lamp ? then reassemble is reverse as above my wife has one of these cars and has been absalutely trouble free for past 5yrs but it does get lots of tlc/servicing by myself hope the instructions are ok to follow?

Nov 23, 2008 | Hyundai Motor 2003 Elantra

Not finding what you are looking for?
2009 Hyundai Genesis Logo

386 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...