Question about 1998 Chevrolet K1500

1 Answer

I need to replace the drivers side outside door handle on a Chev Z 71

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,627 Answers

YOU NEED TO TAKE THE INNER PANEL OFF THE DOOR AND THEN UNDO THE CLIPS OFF THE DOOR UNLATCH ROD AND THE DOOR UNLOCK KEY ROD. TAKE OFF THE TWO 10MM NUTS AND IT'S IN YOUR HAND. REVERSE TO INSTALL.

Posted on Oct 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I 2006 Terrezza CXL,2006 Terrezza CXL, replace side driver outside door handle? replace rear driver outside door handle?


open from inside take inner door panel off and unbolt handle reverse procedure when done .

Jul 12, 2015 | Cars & Trucks

1 Answer

I need written instructions on how to replace a outside driver side door handle for an 06 ford focus


Close/wind up the window. Remove the inside door panel. Be careful with power window switch and door speaker wiring connectors. Disconnect them before pulling the door panel away. Remove any plastic covers that may be glued to the door. Have a look at the door handle from inside the door. You will have some idea as to how to remove it. Usually door handles are secured by screws from the inside. Locate and remove them. Remove linkages to the door handle then pull handle form outside.

Jul 20, 2014 | 2006 Ford Focus

1 Answer

2006 Chev Impala - back driverside door won't open from inside or out.


take the panel off the other side door and have a look and compair the two, though there is a small part between the two mechanisms that maybe missing

Jun 11, 2012 | 2006 Chevrolet Impala

1 Answer

Driver side door handle not working. Can open door from inside but not outside...outside door handle must be broken. Remote works to lock and unlock door. Need to be able to get into my car from the driver...


your linkage rod to the outside door handle has disconnected , if you open up the door panel to access the lock linkage rods you will find the rod that is disconnected . There is a plastic bushing the rod is secured with if it is broken you must replace it , if the rod will not stay in place replace the bushing , hope this helps you out

Jul 31, 2011 | 1999 Oldsmobile Aurora

3 Answers

How do I replace the driver side outside door handle on my 1996 Toyota Tacoma?


Make sure window is up. Remove inner door panel. Disconnect latch mechanism. Should be a few nuts holding handle on. Unscrew them. Install front door outside handle frame sub-assembly. Using a torx wrench (Usually T30) install the outside handle.

May 04, 2011 | Toyota Tacoma Cars & Trucks

1 Answer

How do I replace a '94 chev Astro outside drivers door handle


You first have to remove the inner door panel by taking the screws out of the inner handle and arm rest. the outer edges of the inner door panel either has screws or it has clips that can be pulled out. after you remove the panel you need to roll up the window and you will be looking at the back of the handle. simply un hook the clips that hold the lockrod and the inner opener rod and unbolt the outside door handle. reverse the prosses and walla.

Sep 19, 2009 | 1990 Chevrolet Suburban

1 Answer

Kia sedona outside door handle replacement


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll be able to get to remove the bolts securing the outer handle on

Sep 01, 2009 | 2002 Kia Sedona

1 Answer

Replace inside door handle 95 chev pick up


Got a 95' Silverado also. This happens from time to time. Start at the Bottom of the Door Panel and Loosen. Remove the Screws from the Top Panel. The Panel will Probably not come all the Way off so, You will need to work under it. That Handle is just Pinned. Once you get up to it Just remove the Pin. Buy some Replacement Plastic Clips for the Panel. You will need them!

Jan 22, 2009 | 1995 Chevrolet Silverado 2500

Not finding what you are looking for?
1998 Chevrolet K1500 Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...