Question about 2005 Dodge Caravan

2 Answers

It just doesnt work wont turn on no lights on the timer nothing , i dont even know how to check the fuse because i dont know where it is

Posted by on

  • forever0082 Sep 30, 2009

    lol they cut off half my question ,, its not the car that doesnt work ,it works fine , its the radio in the car went dead and wont turn on at all .



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 426 Answers

Have you tried jumping the vehicle with a set of jumper cables or another vehicle?
Just asking

Posted on Sep 29, 2009


I hate to even ask on this one. Do you not have a good repair shop lined up before you need one.? Have it towed in. What other choices do you have. Your not going to do the repairs yourself anyway.

Posted on Sep 29, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Outlander2004 start but wont fire up

You mean it cranks but won't start ?
If the check engine light is not on when you turn the key on, the engine computer does not have power from a fuse, or the computer has failed.

Aug 03, 2014 | 2004 Mitsubishi Outlander

1 Answer

95 nissan d21 will not turn on/over

You have power to other items but if you have none to the ig switch usually a big red or brown wire then there is nothing going back to the starter etc.You say the red is dead. That usually comes from the big starter terminal. Try google images for a diagram if you don't have one. Alternatively if you can easily access the starter take a length of heavy wire and flash between the battery positive and starter terminal and see if it turns over. If so, you have to fault find the supply to the key.

Apr 08, 2017 | Nissan Cars & Trucks

1 Answer

My 2008 Chrysler 300 would not start. I turned the iginiton key and nothing turns on, not even my AC, Radio, or not even my blinkers. My battery is full charge and even my front lights work. Also, not even...

you can check the ignition switch but for such a young car its pretty unlikely. If its not the ignition switch then you have an electrical wiring issue and those are typically very complex.

Aug 28, 2011 | 2008 Chrysler 300

1 Answer

2002 super duty 7.3 wont start wait to start light on dash doesnt come on anymore hasnt started since the light quit

Hello, Follow your Glowplug wires back to a box and that box is your Timer. You should have wires going into the Timer from either the Ignition or from a Relay between the Ignition and the Timer.

When you turn the Key to Run, there should be power going into the Timer box. If there is power going in and nothing is happening, then the Timer is bad. If there is no power going into the Timer, work your way up to the Relay.

On your truck the Relay should be a DY 861 Motorcraft. It will look a little like a starter Relay. Check the power in and out, there is a fuse in the panel for this too! But if the fuse blew it will probably do it again until a bad part is replaced.

Feb 22, 2011 | 2002 Ford F250 Super Duty SuperCab

1 Answer

My 98 jeep grand cherokee wont start. It doesnt even click or turn over. battery is fine, headlights, dome lights, all go on. Radio doesnt work with ignition on. I checked ALL the fuses, I replaced the...

fuse 8 40a supplies power to starter relay and ignition switch, to close the starter solenoid and engage the starter which draws directly from the battery. check to see that the starter relay is closing, if not ensure that the park neutral switch is not faulty (open circuit), it provides path to close relay (ground side) on the 85 - 86 terminals. if the starter relay does not close the starter will not run. if you have a spare relay swap out the relay for a quick fix attempt. hope this helps

Jan 28, 2010 | 1998 Jeep Cherokee

1 Answer

My lights wont come on when i turn the switch on!

I would check around the turn signals first. see if there is any current at the wires coming in to the light. (take 2 wires and a light bulb if you dont have a current meter)

and ofcoarse I would check the fuse box inside the car and under the hood to make sure there is nothing strange goin on.

Aug 14, 2009 | 1999 Mercury Cougar

2 Answers

2002 Grand Am GT Headlights seem dim , fog lights dont work

Check at the headlight sockets for a bad ground.

Mar 02, 2009 | 2002 Pontiac Grand Am

2 Answers

Nothing electrical works

the main terminal is a heavy red wire attached to the fuse block it should be clean and tight. also you can hook a test light from the battery neg. to the terminal it should light. if it doesn't light you could have a bad engine ground (primary ground). or a poor connection tot he main fuse block terminal previously mentioned

Sep 29, 2008 | 2002 Chevrolet Blazer

Not finding what you are looking for?
2005 Dodge Caravan Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides