2002 Nissan Altima Logo

Related Topics:

Posted on Sep 29, 2009

How do I remove the door card from a Nissan Almera Tino

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Feb 14, 2010

SOURCE: how do I remove the service spanner symbol from a

Try this: With the ignition ON but radio OFF, press in and hold the INFO button and turn volume control until the menu appears. Now choose CONFIRMATION and Enter. Go down and select SERVICE and press Enter. Select RESET and then Enter. Backup to the main menu and now turn ignition off. This should remove it.

Ad

Anonymous

  • 6 Answers
  • Posted on Jun 07, 2009

SOURCE: Nissan Almera Tino Diesel 2.1 - Temperature control not working

Hi there, very common on these vehicles, you need to remove the heater cotrols and check that the cable hasn't come out, usually the clips that hold the cables in place break causing the heaters to not work properly, Nissan do modified clips now to stop it from happening, it may need a cable too if its too far bent, hope this helps.

Anonymous

  • 57 Answers
  • Posted on Sep 22, 2009

SOURCE: Radio says Secure on Nissan Almera Tino (04)

Your radio believes that it has been stolen out of the car since battery power was lost to it (as a result of the car battery going dead). There should be instructions in the user manual on how to reset the radio.

Anonymous

  • 426 Answers
  • Posted on Oct 28, 2009

SOURCE: how to find the heater resistor for a nissan

the majority of heater resistors are on the heater box under the passenger ide of the dash, on some very few models it is part of the actual ac control panel

Anonymous

  • 318 Answers
  • Posted on Dec 09, 2009

SOURCE: Slow Electric window on Nissan Almera Tino 2002.

If you spray silicone in the tracks from the top open window and the speed changes faster I would say the channels are too tight. If no change then the voltage at the motor needs to be checked at 13+ volts. If not then the wiring at the door bend needs to be checked for fraying. If a garage does this job, then they should fix it right. It is not right. You paid for it.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My 2004 NISSAN Almera Tino manual starts but when I accelerate, the fire goes off.

Question edited for full 'year make model'.
Question moved to Nissan.

You need a mechanic with a scan tool to see why. A pro grade scanner can record what happens at the moment it shuts off.

It appears to be a known issue.

https://www.google.com/search?q=2004+nissan+almera+tino+cuts+out+while+driving

..
1helpful
1answer

Location of nissan almera tino crankshaft sensor

if you are under the car it should be on the firewall side. It is black piece or a light grey color.
0helpful
1answer

Heater on nissan almera

That noise is the heater and AC air temperature control electric blend door motor trying to move a duct door that is sticking due to heat warping. You will need to remove the entire dash assembly and replace the blend door. This door is located between the AC core and the heater core and "blends" the air from each (hot from heater core and cold from AC core) to give the desired air temperature,.
0helpful
1answer

Failed emissions test nissan tino

Mine just failed emissions test garage said its burning oil what is the soulution
0helpful
1answer

How do i adjust handbrake on 04 nissan tino dci

How do I adjust the handbrake cable on a Nissan Almere 2004 please
1helpful
1answer

I have a nissan almera 2001 1500 what model

hi i am not 100% sure but i think it is the P11 144 gearbox its used with the almera qg15de engine. i think it is also used in a primera and almera tino of the same years.
0helpful
1answer

Slow Electric window on Nissan Almera Tino 2002.

If you spray silicone in the tracks from the top open window and the speed changes faster I would say the channels are too tight. If no change then the voltage at the motor needs to be checked at 13+ volts. If not then the wiring at the door bend needs to be checked for fraying. If a garage does this job, then they should fix it right. It is not right. You paid for it.
13helpful
1answer

Nissan Almera Tino Diesel 2.1 - Temperature control not working

Hi there, very common on these vehicles, you need to remove the heater cotrols and check that the cable hasn't come out, usually the clips that hold the cables in place break causing the heaters to not work properly, Nissan do modified clips now to stop it from happening, it may need a cable too if its too far bent, hope this helps.
0helpful
1answer

Nissan Almera Tino Right hand side

YEs but if you are going to do some secrifice on your luck of car model from front,

otherwise its impossible,

you can get this from older car dealer or service center,

TNX
Not finding what you are looking for?

258 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...