Question about 1994 Chrysler LeBaron

1 Answer

How do i flush the radiator on a 94 chrysler lebaron

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 269 Answers

You must dispose of the antifreeze properly.The simplest method is to install a garden hose connector to the heater hose connect the garden hose to the connector.Run the engine with heater on and flush the system until the water is clear.You must open the radiator drain valve and the bleed valve at the water pump

Posted on Sep 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought 1995 lebarron radiater was really rusty inside and running hot i flushed it following directions on bottle discovered it leaks put bars stop leak silver powder in it drove fine from cali back...


Get a new radiator. Sounds like your old one is too far gone-will only keep giving you problems. Flush the whole coolant system, maybe a good strong back flush at a radiator shop or shop.
Bars stop leak is okay for an emergency, but most mechanics say don't use it as it can sure plug up a heater core.

Apr 18, 2012 | 1995 Chrysler LeBaron

1 Answer

How can I seal my back window into my 1991 chrysler lebaron convertible?


3M weather strip adhesive It worked on my 94 corvette MAKE sure it is clean

Mar 19, 2012 | 1991 Chrysler LeBaron

1 Answer

How do I get to the water pump on a 94 Chrysler Lebaron GTC when the right motor mount is in the way?


simple remove the motormount, but you will have to support the engine, you can block it but not under the oil pan, good luck

Nov 20, 2010 | 1994 Chrysler LeBaron

1 Answer

I need to flush the radiator can you tell me how?


best thing is to get a "Coolant tee" from the parts store

you cut this into a heater core hose

makes life simple!!

May 31, 2010 | 1995 Chrysler LeBaron

1 Answer

What SAE level of oil should i put in my '94 chrysler lebaron le


YOU CAN RUN 10W -30 OR 10W - 40 WEIGHT.IF YOU LIVE IN VERY COLD CLIMATES YOU CAN RUN 5W - 30.

May 20, 2010 | 1994 Chrysler LeBaron

1 Answer

Diagram for timing marks 94 lebaron 3.0litre


Click on the following free, direct Link. It has all the Timing Belt Diagrams with Marks you will need for your 1994 Chrysler LeBaron 3.0L.

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1994/make/chrysler/model/lebaron/1994_chrysler_lebaron_timing_belt_diagram_marks.htm

Apr 05, 2010 | 1994 Chrysler LeBaron

2 Answers

Do you have a diagram on how to install a serpentine belt on a 1994 Chrysler LeBaron?


1994 CHRYSLER LEBARON - V6 3.0L 2972cc 181ci GAS FI N 3

Open the hood, the diagram for the serpentine belt is on the cowling.

From DAYCO Catalog
Belt Routing Diagram (Alt., P.S., Idler & Tens.)
9e1b1eb.jpg


From comments to other users and Lebaron Owners; for remove, starting at the alternator pulley and going clockwise around the pathof the belt, the belt drops down and forward and goes under the idlerpulley, continues forward and less steeply downward and goes around thecrankshaft pulley clockwise, rises rearward going over the top or thetensioner pulley counterclockwise, then drops down and around the powersteering pump clockwise and rises to go around the alternator pulleyclockise (which is where I started the description). To loosen thetension to remove the belt, or to give you slack to install the beltwithout having to force it over a pulley while under tension you rotatethe tensioner pulley arm around its pivot clockwise according to the'94 shop manual. It doesn't show by what means to effect this rotation,but in the earlier manual I have ('89) it shows there to be a 1/2"square hole in the tensioner arm into which you insert a breaker barwith a 1/2" square drive which gives you the temporary lever to rotatethe tensioner against its spring action. I assume there is a similar1/2" square hole on the '94 you are working with. Interestingly,between '89 and '94 the idler pulley was added, and the requiredrotation of the tension arm changed from counterclockwise to clockwiseto relieve the tension."

I think this will help you get the belt on. Good luck.

Oct 13, 2009 | 1994 Chrysler LeBaron

2 Answers

Where can i find a diagram to install serpentine


Most parts stores can print this out for you for free.

Sep 10, 2009 | 1991 Chrysler LeBaron

Not finding what you are looking for?
1994 Chrysler LeBaron Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...