Question about 2003 Kia Sorento

Open Question

Kia Sorento 2003 Purge Control valve code P0443

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 139 Answers

SOURCE: 2003 kia sorento coolant change

you shoud not have to change it.this wouldbe long life
antifreeze have the PH check at a shop

Posted on Apr 09, 2009

Ad
  • 48 Answers

SOURCE: keep getting p0443 code and check engine light

might need to replace the purge selonoid valve

Posted on Jul 17, 2008

ghost4548
  • 776 Answers

SOURCE: Location of the Purge Control Valve for 2003 Hyundai Tiburon

There were two different engines which were installed in the 2003 Tiberon... the 2.0 liter 4 cylinder:
22c99c7.jpg

And the 2.7 Liter V6:
cb31feb.jpg

Posted on Jun 06, 2009

  • 12 Answers

SOURCE: where is the pcv valve on 2003 Kia sorento

If it is not near the rocker cover, then follow the hoses from the charcoal canster to the head cylinder.

Posted on Jan 21, 2009

  • 84 Answers

SOURCE: My 2003 Kia Spectra has Diagnostic codes: P1404 & P0444.?.?

the purge valve i believe is located near your gas tank unless theyve moved it i should look like a little canister cyclinder shaped. both codes could be set off by the same problem. try replacing the valve.

Posted on May 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have code P0443. How can I find out what is wrong?


OBD-II Trouble Code: P0443 Evaporative Emission Control ...

www.obd-codes.com/p0443
P0443 - Evaporative Emission Control System Purge Control Valve Circuit ... P0443 trouble code symptoms could be just an malfunction indicator lamp (MIL) ... But, it's also possible to have a lean condition or a rough running engine if the ...Missing: jaguar ‎xj6

P0443 OBD-II Code and Check Engine Light - Jaguar Forums - Jaguar ...

www.jaguarforums.com > ... > XJ XJ8 / XJR ( X308 )
Feb 24, 2014 - Anyone have an idea on where to look for this? Jaguar® Leasing Deals.... P0443 OBD-II Code and Check Engine Light-xj8-purge-valve. .... Newby with air suspension fault, philwarner, XJ XJ6 / XJ8 / XJR ( X350 & X358 ), 7 ...Missing: 1995

Error code p0443..Think dealer is on crack - F150online Forums

www.f150online.com/.../287418-error-code-p0443-think-dealer-crack.h...

Jan 01, 2016 | 1995 Jaguar XJ6

1 Answer

I have a truck that popped up a P0443 code up and I've been trying to see what it is so I can get it fixed thank yo


P0443 - Evaporative Emission Control System Purge Control Valve Circuit Malfunction

Possible causes: - Faulty Evaporative Emission (EVAP) Purge Solenoid Control
- Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
- Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection

When is the code detected? An improper voltage signal is sent to Engine Control Module (ECM) through the valve.
Possible symptoms: - Engine Light ON (or Service Engine Soon Warning Light)
P0443 Description: The Evaporative Emission System (EVAP) canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the Engine Control Module (ECM). The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.

P0443 Information for specific makes: P0443 ACURA
P0443 CHRYSLER
P0443 DODGE
P0443 FORD
P0443 HONDA
P0443 INFINITI
P0443 ISUZU
P0443 JEEP
P0443 KIA
P0443 LAND-ROVER
P0443 LEXUS
P0443 MAZDA
P0443 MERCEDES-BENZ
P0443 MITSUBISHI
P0443 NISSAN
P0443 TOYOTA
P0443 Evaporative Emission Control System Purge Control Valve Circuit...

Jun 03, 2015 | Cars & Trucks

2 Answers

Engine dies while driving. p0443 code. happens after I get gas.


P0443 Evaporative Control System Purge Control Valve Circuit Malfunction.

It is to do with venting the fuel tank.

It may simply be a loose gas cap.

May 12, 2015 | 2004 Kia Sorento EX

1 Answer

2004 Chevy impala code p0443, how do I correct


P0443 Evaporative Emission Control System Purge Control Valve Circuit
P0443 - Evaporative Emission Control System Purge Control Valve Circuit

Read more at: http://www.obd-codes.com/p0443
Copyright © OBD-Codes.com
The Evaporative Emissions System (EVAP) allows fumes from the gas tank to enter the engine to be burned, rather than vented into the atmosphere as an emission. The purge valve solenoid is supplied switched battery voltage. The ECM controls the valve by operating the ground circuit, opening the purge valve at specific times allowing these gasses to enter the engine. The ECM monitors the ground circuit as well, watching for faults. When the purge solenoid isn't activated, the ECM should see a high voltage on the ground circuit. When the solenoid is activated, the ECM should see the ground voltage pulled low, close to zero. If the ECM doesn't see these expected voltages, or senses an open in the circuit, this code is set. Note: This DTC is similar to P0444 and P0445. Potential Symptoms P0443 trouble code symptoms could be just an malfunction indicator lamp (MIL) illumination. There may be no drivability problems at all. But, it's also possible to have a lean condition or a rough running engine if the purge valve is stuck open. Usually though, these symptoms are accompanied by other EVAP codes. Another symptom may be excessive pressure in the gas tank in the form of a "whooshing" sound when the cap is removed, indicating a purge valve that isn't working at all or stuck closed. Causes To cause a P0443, there has to be a problem with the purge control CIRCUIT, not necessarily the valve. Usually they are a unit housing the valve and the solenoid as an assembly. Or it could be comprised of a separate solenoid with vacuum lines to a purge valve. That said, it could be any of the following: Bad purge solenoid (internal short or open) Wiring harness chafing or rubbing another component causing short or open on control circuit Connector worn, broken or shorted due to water intrusion Driver circuit inside powertrain control module (PCM) is bad Possible Solutions 1. Using a scan tool, command the purge solenoid to activate. Listen or feel for a clicking coming from the purge solenoid. It should click once, or on some models it may click repeatedly. 2. If it doesn't click with scan tool activation, unplug the connector and examing the solenoid and connector for damage, water, etc. Then check for battery voltage on the feed wire with the key on. If you have battery voltage, then ground the control side manually using a jumper wire and see if the valve clicks. If it does, then you know the solenoid is working properly but there is a problem with the control circuit. If it doesn't click when you manually ground it, replace the purge solenoid. 3. To check for a problem on the control circuit (if the solenoid tests okay and you have voltage to the solenoid) plug the solenoid back in and remove the control circuit (ground) wire from the ECM connector (If you're unsure how to do this, do not attempt). With the ground wire removed from the ECM, turn the key on and then manually ground the Purge valve control wire. The solenoid should click. If it does, then you know there is no problem with the control wire to the solenoid and there is a problem with the ECM purge solenoid driver circuit in the ECM. You'll need a new ECM. However if it doesn't click, then there must be an open in the wiring between the ECM and and the solenoid. You must find it and repair it.

Read more at: http://www.obd-codes.com/p0443
Copyright © OBD-Codes.com

Apr 29, 2015 | Cars & Trucks

1 Answer

I have a 2001 dodge ram 1500 code P0443 code came on code p0455 code was on I replace the purge valve then the code p0443 came on


code p0443=It's whining about the control circuit for the purge valve. Make sure you are getting power to the valve, and you see 12 volts on the control side as well.

code p0445 might be just a gas cap problem.

Mar 14, 2015 | Dodge Ram 1500 Cars & Trucks

1 Answer

Code P0443


Error Code: P 0443
Description:
Evaporative Emission (EVAP) Canister Purge Valve - Circuit Malfunction
Problem Area:
Wiring, or VSV connector loose or detached.
Evaporative emission (EVAP) canister purge valve.

Feb 24, 2014 | 2003 Mitsubishi Montero

2 Answers

Code p0443


Code 443 is a problem with the EVAP canister purge control valve.
The computer can not purge the vapors in the gas tank to the canister because the valve is not functional.
The valve and the circuit would need to be tested.

Jan 25, 2013 | 2001 Hyundai XG300

1 Answer

I have a plymouth neon and need to find out how to fix code p0443


P0443 Code is purge control valve circuit. Go to the driver side near the battery or better yet use the underhood sticker emission diagram That black cylinder is the canister,on it is the purge valve which hoses lead to the intake. make sure the hose are not torn,or leaking or disconnected if it is clear the code rerun the monitor (just drive it its 2 trip),because more likely that would be the code for P0443.Just because its a valve circuit doesnt mean its the valve circuit the ECM sent a command to purge and the MAP did not detect a purge,The ECM doesnt know if it is caused by a bad purge solenoid a disconnected line for the purge (normally closed) so it coded it if you want to fix it it is either the hose of the purge or the valve itself.

Mar 08, 2012 | Plymouth Neon Cars & Trucks

1 Answer

2002 Kia sportage with the code p0443


Hi Brittany:
The Evaporative Emissions System (EVAP) allows fumes from the gas tank to enter the engine to be burned, rather than vented into the atmosphere as an emission. The purge valve solenoid is supplied switched battery voltage.

The ECM controls the valve by operating the ground circuit, opening the purge valve at specific times allowing these gasses to enter the engine. The ECM monitors the ground circuit as well, watching for faults. When the purge solenoid isn't activated, the ECM should see a high voltage on the ground circuit. When the solenoid is activated, the ECM should see the ground voltage pulled low, close to zero. If the ECM doesn't see these expected voltages, or senses an open in the circuit, this code is set.

Potential Symptoms: P0443 trouble code symptoms could be just an malfunction indicator lamp (MIL) illumination. There may be no drivability problems at all. But, it's also possible to have a lean condition or a rough running engine if the purge valve is stuck open. Usually though, these symptoms are accompanied by other EVAP codes. Another symptom may be excessive pressure in the gas tank in the form of a "whooshing" sound when the cap is removed, indicating a purge valve that isn't working at all or stuck closed.

To cause a P0443, there has to be a problem with the purge control CIRCUIT, not necessarily the valve. Usually they are a unit housing the valve and the solenoid as an assembly. Or it could be comprised of a separate solenoid with vacuum lines to a purge valve. That said, it could be any of the following:
Bad purge solenoid (internal short or open)
Wiring harness chafing or rubbing another component causing short or open on control circuit
Connector worn, broken or shorted due to water intrusion
Driver circuit inside powertrain control module (PCM) is bad

Possible Solutions
1. Using a scan tool, command the purge solenoid to activate. Listen or feel for a clicking coming from the purge solenoid. It should click once, or on some models it may click repeatedly.

2. If it doesn't click with scan tool activation, unplug the connector and examing the solenoid and connector for damage, water, etc. Then check for battery voltage on the feed wire with the key on. If you have battery voltage, then ground the control side manually using a jumper wire and see if the valve clicks. If it does, then you know the solenoid is working properly but there is a problem with the control circuit. If it doesn't click when you manually ground it, replace the purge solenoid.

3. To check for a problem on the control circuit (if the solenoid tests okay and you have voltage to the solenoid) plug the solenoid back in and remove the control circuit (ground) wire from the ECM connector (If you're unsure how to do this, do not attempt). With the ground wire removed from the ECM, turn the key on and then manually ground the Purge valve control wire. The solenoid should click. If it does, then you know there is no problem with the control wire to the solenoid and there is a problem with the ECM purge solenoid driver circuit in the ECM. You'll need a new ECM. However if it doesn't click, then there must be an open in the wiring between the ECM and and the solenoid. You must find it and repair it.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 23, 2012 | Kia Sportage Cars & Trucks

1 Answer

Loss of power kia sportage PO443 440 CODES


p0443 is emission control system purge valve C fault, p0440 is emission control system malfunction-- fix p0443 and it should be fine. good-day !

Nov 01, 2011 | 2002 Kia Sportage

Not finding what you are looking for?
2003 Kia Sorento Logo

Related Topics:

545 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...