Question about 2006 Dodge Ram 1500
I had the same problem after I welded on the exhaust. There was an electrical feed back through the system. Take the negative battery cable off for a couple minutes then put it on and the computer should have reset itself
Posted on Oct 13, 2009
This is controlled by the computer as you said. Most of those types of things have three choices: default-which is probably 10 seconds, on longer-which can be programmed in by dealer, off-programmed in by dealer. Your owners manual should have this info, but you'll probably have to hunt for it. Once you decide, it has to go to dealer to reprogram it to what you decide.
Posted on Sep 29, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
The interior lamp switch is in the ON position.
The keyless entry transmitter unlocks the doors (illuminated entry).
When the key is removed from the ignition switch with all of the doors closed, the courtesy lights light for approximately 25 seconds before fading out.
Battery positive voltage (B+) is applied at all times through the IP fuse block CTSY LP/PWR MIR fuse 6A via CKT 640 (ORN) through the body control module (MALL) to the courtesy lights via CKT 1732 (ORN). The MALL provides a ground through CKT 156 (WHT) for the courtesy lights under the following conditions:
The MALL receives an input from a door being opened.
The MALL receives an input from the interior lamp being turned ON.
The MALL receives an input from the doors being unlocked using the keyless entry transmitter.
The courtesy lamps then light.
When the courtesy lights are activated by opening and closing a door, the courtesy lights will remain on for approximately 25 seconds before fading out after all of the doors are closed. If the ignition switch is turned to START or RUN within the 25 seconds, the lights immediately begin to fade out. If a door is left open, the MALL removes battery positive voltage (B+) to the courtesy lights after 10 minutes. When the courtesy lights are activated by the interior lamp switch, the lights remain on as long as the interior lamp switch is in the ON position. When the courtesy lights are activated by unlocking the doors using the keyless entry transmitter, the lights remain on for approximately 40 seconds. If the doors are locked using the keyless entry transmitter within the 40 seconds, the lights immediately begin to fade out.
Body Control Module (MALL) Diagnostic Mode
For a detailed explanation of the MALL module diagnostic mode, refer to Body Control Module Cell 51.
What interior light ? Dome , courtesy lights etc....They don't work with switch, keyless entry , door opening ?
Dec 03, 2015 | Buick Cars & Trucks
Mar 29, 2014 | 2004 Jeep Grand Cherokee
Apr 01, 2017 | 2003 Kia Sorento
Jan 20, 2012 | 2001 Mazda 626
Sep 28, 2010 | Chevrolet Silverado 1500 Cars & Trucks
Feb 12, 2010 | 1996 Ford F250 Crew Cab
Jan 07, 2010 | 2002 Ford F150 Regular Cab
Dec 13, 2009 | 1991 Chevrolet S-10 Blazer
Nov 05, 2009 | 1999 Ford Windstar
Jan 23, 2009 | 1999 Jeep Cherokee
135 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: