Question about 1998 Chrysler Town & Country

2 Answers

Security alarm on so car won't start

I have a 1998 Chrysler Town & Country and when my sister open the passenger side door by sticking her hand in the window the alarm system went off and now I can't crank up the car. what do I need to do to get the alarm off so the car can run???any suggestions would be appreciated.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

24,
Try locking/unlocking the passenger door with the key into the door lock to reset the alarm system. If the passenger side doesn't work, then try the driver side. Good luck.

Posted on Oct 14, 2009

  • Jose L Nogueras Jun 27, 2011

    it work only on the back gate door. Our 1999 Town & Country would not start at all, not even a click. prior to that would start then die or alarm would turn on and stay on. An hour later unlocking and locking the back gate with the key disable the alarm just by pure luck. Just happened minutes ago. We did try many things over 2 days. Hope it works for all. Jose , Kissimmee FL.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What if my keys don't match the locks in the doors?

Posted on Sep 24, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 457 Answers

SOURCE: 1998 Chrysler town and country van won't

use the key in passernger door and lock it then do the same on driverside then go back to the passenger side and unlock with key then driverside this wil reset the alarm and the vehicle should start.

Posted on Jul 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 Chyrsler Town and Country Anti Theft system won't disarm


1St make sure your using the same key you always do not your spare or something that was cut new. also read your book on security usually there is a period of leaving the key in the ignition for so long so it will recognize this is the right key.

Jun 26, 2014 | 1998 Chrysler Town & Country

1 Answer

2001 Town and Country 3.8 When I open the driver's side door the alarm will go off and won't stop until I start the car.


There is a 2 wire switch that goes on the backside of your door lock cylinder. Prob got knocked off when u were in there. Till u can look just unlock the pass door or the lift gate with key and that will shut alarm off

Apr 19, 2013 | 2001 Chrysler Town & Country

1 Answer

1998 Chrysler town and country van won't start. I would like to know how to disarm my alarm system so car will start.


use the key in passernger door and lock it then do the same on driverside then go back to the passenger side and unlock with key then driverside this wil reset the alarm and the vehicle should start.

Jun 16, 2011 | 1998 Chrysler Town & Country

1 Answer

Alarm button broken. Cannot disarm alarm. What do I do? Chrysler Town & Country LX 2003 model.


You can arm or disarm alarm manually with the key at the drivers side door, turn the key to open the locks and the alarm must be disarmed.

Nov 01, 2010 | 2003 Chrysler Town & Country

1 Answer

2001 Town and Country 3.8l LXi When I open the each the passenger or driver side doors the alarm will go off..wont stop until i start the car. Does not happen when the doors are opened with the key...


the door does not have a key reccognition system,only the ignition,
so if you use the key,without first disabling the alarm,the alarm will go off,SO use the remote to unlock the car and the key to start it....no problem....

Sep 07, 2010 | 2001 Chrysler Town & Country

5 Answers

2005 Chrysler Town & Country. Passenger side window problem.


HAVEK 1005 sounds right on track.... but also try this, usually works well for non functional power windows, specially Caravans.

NO COST PROCEDURE TO FIX IT:

1. Sit in vehicle, on seat next to problematic window
2. Ignition key is on
3. Door in question is opened (in case you closed it)
4. While door is open, press and hold power window button in desired window travel, keep button pressed !!
5. SLAM hard the door closed with one hand while other hand holds button as per #4.
6. Watch window operate as it should.
7. Repeat 3-6 if necessary, but usually the first try works!

NOW, for the naysayers that says you must replace power window motors etc, at $$$ cost because the above fix does not work, or is not long lasting fix, or less than a "professional fix".... Well then, when the window fails to operate again, apply same fix again at that time.

I have fixed my van this way numerous times (usually once a year), and to all local friends I recommend this fix too, likewise do the same and are happy with the solution.

Jun 24, 2010 | 2005 Chrysler Town & Country

1 Answer

Looking to replace passenger side mirror on a 2006 Town and Country. Anyone have Instructions available?


    Remove Old Mirror
  1. 1 Open the side door to the Chrysler Town & Country, and find thescrew that holds the side mirror molding in place.

  2. Take the screw out and remove the molding panel that attached around the outside of the power mirror.

  3. Remove the bolts connecting the mirror to the door assembly. If equipped, unplug the power side view mirror wiring harness connector.

  4. Unplug the electric connectors, and pull the mirror out of the molding.

Jun 01, 2010 | 2006 Chrysler Town & Country

2 Answers

Town & Country the Power locks


check the switches in the door pillars first then the rubber boot where the cables go from the door to the door pillar

Nov 21, 2009 | 2002 Chrysler Town & Country

1 Answer

My car alarm will not reset and the issue with problems below


If you (hopefully) have the key fob (keyless entry remote), try closing the doors, then lock and unlock using the keyless entry. This should reset the security so the vehicle will start.

Jul 04, 2009 | 1998 Chrysler Town & Country

Not finding what you are looking for?
1998 Chrysler Town & Country Logo

1,612 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...