Question about 1999 Ford Taurus

Open Question

Replacing a 99 taurus pressure power steering line DOHC. How?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 69 Answers

SOURCE: power steering line leak for 93' taurus lx at pump

did the hose get cracked or crimped when it was replaced may need new hose

Posted on Oct 06, 2008

Ad
csmock132
  • 4669 Answers

SOURCE: power steering

Go to a parts store and tell them you want power steering return hose or transmission cooler hose. It comes in bulk, they can just cut off how much you need.

Posted on Mar 25, 2009

  • 297 Answers

SOURCE: I need to know how to replace a power steering

Yep

http://www.motorera.com/books/ford/TAURUS.htm


Proper Hayes manual explaining all carefully does not exist for that year/model.
Shame, I have used these manuals whenever I could get them.

Thereyou will find everything you need anbout how to fix that car.
But maybe she is not very different from previous years. Chck local library bokshop after looking good under your bonnet.

Posted on Apr 28, 2009

  • 299 Answers

SOURCE: pressure line for power steering on 2000 olds

In will have a crimped fitting,low preasure will have clamp.

Posted on Jun 18, 2009

MNfisherman
  • 11896 Answers

SOURCE: 99 FORD TAURUS DOHC - WON'T START. CRANKS, BUT

If it has fuel pressure and fuel to the regulator and the rails, the regulator is working, it is getting spark to every cylinder and the timing is correct, You have good compression, it is likely a faulty sensor. You can test each one with a sensor tester or ohmmeter/multi-tester

Relay or sensor.

Posted on Jul 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a 99 Olds Alero, in the return lines of the power steering hoses, which place does the high pressure hose attach to?


RETURN TURN LINE GOES TO THE LEFT OF RACK PINION AND HIGH PRESSURE HOSE GOES TO THE RIGHT OF RACK PINION.LOOKING AT POWER STEERING PUMP HIGH PRESSURE HOSE THICK HOSE SCREWS INTO POWER STEERING PUMP.WHILE LOW PRESSURE HOSE HAS A HOSE WITH A CLAMP THE LOW PRESSURE HOSE HOOKS TO TOP OF POWER STEERING PUMP.LOW PRESSURE DONT SCREW INTO POWER STEERING PUMP IT IS HELD IN PLACE BY A HOSE SMALL CLAMP.

Jun 24, 2011 | 1999 Oldsmobile Alero

1 Answer

My car ('99 taurus sw se dohc) will not start. starter works, engine will not turn over. does not seem to be getting fuel. replaced fuel filter. is there anyway to tell if this is a bad fuel pump without...


yeah check the pressure with a fuel gauge should have around 40 psi or so. can u hear the pump run momentarily when you first turn the key over? if u have no fuel pressure then remove the backseat and check the wiring and make sure theres power to the pump.

Oct 05, 2010 | 1999 Ford Taurus

1 Answer

What to expect replacing power steering pulley, 2000 Taurus dohc duratec sel.


Replace the entire pump if you have pulley issues. No one presses off pulleys on steering pumps, even though you see pullers advertised.

Jul 28, 2010 | 2000 Ford Taurus

1 Answer

I NEED TO REPLACE THE POWER STEERING PRESSURE SENSOR BUT I NEED A DIAGRAM OF WHERE IT WOULD BE ON A 99 CRHYSLER CONCORDE


Hi!
The power steering pressure switch is mounted in the pressure line between the steering gear and the steering pump.
Just follow the line from the pump and you'll find it.
Good luck

Feb 10, 2010 | 1999 Chrysler Concorde

2 Answers

99 FORD TAURUS DOHC - WON'T START. CRANKS, BUT WON'T TURN OVER. HAS FUEL, PRESSURE, SPARK, POWER - ANY IDEAS?


If it has fuel pressure and fuel to the regulator and the rails, the regulator is working, it is getting spark to every cylinder and the timing is correct, You have good compression, it is likely a faulty sensor. You can test each one with a sensor tester or ohmmeter/multi-tester

Relay or sensor.

Jul 19, 2009 | 1999 Ford Taurus

1 Answer

High pressure power steering hose - one or two?


Here is a pic.

[IMG]http://i253.photobucket.com/albums/hh43/chuck943/DG1690A.gif[/IMG]



1 3A674 Power Steering Pump 2 3A714 Power Steering Pressure Hose 3 3C510 Power Steering Hose Bracket 4 3N824 Power Steering Pressure Switch 5 3504 Steering Gear 6 3A713 Power Steering Return Hose (Gear to Cooler) 7 3D746 Power Steering Fluid Cooler 8 3493 Power Steering Return Hose (Cooler to Pump

Feb 23, 2009 | 1999 Ford Taurus

1 Answer

Power steering line leak for 93' taurus lx at pump


did the hose get cracked or crimped when it was replaced may need new hose

Oct 06, 2008 | 1993 Ford Taurus

Not finding what you are looking for?
1999 Ford Taurus Logo

Related Topics:

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...