Question about 2005 Nissan King Cab
My navara starts fine on cold oil pressure light gose out then it cuts out then hard to start but is ok when warm can any one help please? thanks james
Hi james, you might have air in your injection system. ussually this air pocket could be corrected by bleeding the system; or, your fuel filter is clogged. First the filter, if your fuel filter is directly attached to a hand pump, and your filter has a sendimentary bleed port at its bottom, drain this first. Then, after its drained, close the drain plug. Next is to look for the fuel return bolt on the injection pump(usually it has a "out" word etched on it) and usually uses a 17mm hexagonal head. Loosen the bolt and slowly remove it. Take care, and watch orientation of the two copper washers that are used for gasket. You might also find a filter screen attached to the bolt on some injection pumps. Anyways, if there is no filter screen, re-screw in the bolt(remember the copper washers) but do not tighten it just let it loose for a while. Now for the sweaty part, using the hand pump, pump the fuel in until the return bolt spits out fuel. You will see bubbles on the first few pumps but do not stop until it bellows out pure and clear fuel w/o bubbles. If you attained the goal, stop pumping and screw the bolt shut. Wipe-off excess fuel from the injection pump. Try starting the engine. when the engine turns over let it warm up for a while the with, again, with your no. 17mm open wrench, try loosening the injector feedline one at a time(while the engine is running).Watch out for squirting fuel, your engine might rattle a little but it will be fine, just let the fuel flow a few seconds then re-tighten the nut. Do this on all 4 injectors. Let the engine run a few minutes then shut it down. Let it completely cool down then re-start it. Also try checking glow plug(or heater plug) condition. If one glow plug is busted replace all 4 at the same time with the same brand. this would help to keep the engine attain a 1-click engine run.
Hope this helps.
Posted on Sep 29, 2009
The rear side lights and number plate light on my 2006 Nissan Navara Outlaw have gone out. The front side lights, and all other electrical equipment works correctly. I have replaced the bulbs and checked all of the bayonet fuses (as the fuse identification guides do not mention side lights), but still they don't work - can anyone help?
Posted on Mar 19, 2011
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 13, 2016 | Nissan Cars & Trucks
Sep 23, 2015 | Nissan Cars & Trucks
Sep 27, 2014 | Cars & Trucks
Apr 10, 2012 | 2006 Nissan Navara 2.5
Apr 10, 2012 | 2005 Nissan Pickup Navara
Jun 01, 2010 | 2005 Nissan King Cab
Jan 13, 2010 | 2005 Nissan King Cab
Jul 30, 2009 | 2003 Nissan Pathfinder
2,298 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: