Question about 2003 Toyota RAV4

Open Question

Where is the fuse for toyota rav 4 brake lights

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: toyota rav 4

I work for Toyota, and I will be glad to provide you with the actual answer:

The RAV/4 product is available in two models, a 4WD model and a 2WD model.
The difference between the two is on the 2WD model, there is no driveshaft going under the vehicle to the rear wheels, and no rear differential. There is no "RAV/2"; both models are called RAV/4's.

There is a lot of common confusuion about how the 4WD works. It is full time 4WD. In other words, it is always in 4WD. It does not "kick in/kick out/automatically engage", or anything like that. It is 4WD all of the time. But, when I say "4WD", that is sometimes mistaken for "all wheel drive", and, in this case, the RAV/4 is not "AWD". What this means is that if you raise the RAV/4 up on a lift, and put it in gear, 1 rear and the other side front tires will spin. True "all wheel drive" would have ALL 4 wheels spinning. This is not the case with the Rav/4. What the RAV does have, making up for not having "True AWD" on the 5 speed model, however, is a switch that locks the center differential in the transfer case, which, when engaged, applies a method of "locking" the 4WD system for maximum traction, but it is still not AWD. The automatic version doe not have this ability.
The last "true AWD" vehicle for purchase was a 1970's International Scout.
If you are considering purchasing a RAV/4, that is a very good investement. They hold their value quite well, and are virtually bulletproof; I do not make any "money" off my RAV/4 customers...
Just "gas station work". Very nice cars. I hope that this helps you, please feel free to comment back with any otherr questions...Glad to be of assistance.
Toyota Ed


Posted on Oct 17, 2008

  • 65 Answers

SOURCE: toyota rav 4

I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram

Posted on Nov 30, 2008

  • 1861 Answers

SOURCE: 2003 Toyota Camry - Both Brake lights not working

Lok in the trunk on the left side, behind the carpet for a small plastic box with a bunch of wires going to it. Look to see if there is brake light powe coming in with the pedal depressed. If so, and no power is coming out, you need to order and replace the "taillamp failure sensor".

Posted on Jul 16, 2009

  • 242 Answers

SOURCE: On a 94 Toyota Rav 4. A warning light is on. It

its rear accel oil low light ,top up very soon as can do damage.there a nut on accel to drain and refil

Posted on Dec 29, 2009

  • 1 Answer

SOURCE: 2008 rav-4 toyota brake pedal

If you own a Toyota with (BA) Brake Assist, it may be out of adjustment. It is adjustable on the 2010 Highlander and I would guess that it might be adjustable on your Toyota vehicle as well. (Assuming this is actually your problem, you have had it checked out by your service department and they said there is nothing wrong or that it was normal.) If the brake assist is out of adjustment it may be coming on too soon or when minimal brake pressure is applied. This causes a long brake pedal (brake fade or the pedal travels longer than normal before resistance is felt) and/or jerky brakes. As far as the Hill Climb Assist or DSC, this feature is activated when the brakes are applied after the vehicle has come to a stop and then you continue to press harder on the brakes for a couple more seconds. It also comes on if you drive with two feet. If you have your foot on the brake and you press slightly on the accelerator (when the vehicle is completely stopped), the DSC will come on and you will hear the chirp.

Posted on Jan 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brake lights dont turn on toyota rav 4, whats the problem?


Check the switch on the break peddle , thay can work loose or renewal good luck colin

Jul 05, 2017 | Toyota Cars & Trucks

2 Answers

Dashboard lights out and also brake lights. does that mean the battery needs to be changed on 1998 Toyota rav 4x4?


I doubt the battery would be the cause.
The dash lights are on a different circuit from the brake lights.
Do you have power at both fuses ?

Sep 06, 2014 | 1998 Toyota RAV4

1 Answer

Dashboard lights out and also brake lights. does that mean the battery needs to be changed on 1998 Toyota rav 4x4?


If all your fuses are good, start looking at your ignition switch. It's the one thing all those circuits have in common.

Sep 06, 2014 | 1998 Toyota RAV4

1 Answer

99 rav-4 wont come out of park


check to see if you blew a fuse your rav-4 has a switch that when you press on the brake it allows you to switch out of park but without pressing the brake you can't switch out off park. There should be an abs fuse or brake fuse or something of that order check it. Hopes it helps.

Apr 18, 2014 | 1999 Toyota RAV4

1 Answer

On a 94 Toyota Rav 4. A warning light is on. It


its rear accel oil low light ,top up very soon as can do damage.there a nut on accel to drain and refil

Dec 29, 2009 | Toyota RAV4 Cars & Trucks

2 Answers

Location of fuse box in Rav 4 1997


Yes there is also a fuse box under the hood. The schematic for fuses should be in the fuse box cover.

Dec 28, 2009 | 1997 Toyota RAV4

1 Answer

1998 toyota rav 4. Right side low beam headlight doesn't work. Hi beam on that side does. Checked fuses, they appear OK, and tried 2 other headlights. Left side hi and low working fine.


sounds like there is a broken wire. the only advise i can give you is to follow the hot wire for that light untill you find the break in the wire.

Dec 25, 2009 | 1998 Toyota RAV4

1 Answer

One of the dash board lights on my 2007 toyota rav 4 won't cut off, what is wrong with it? It's not the oil light


Sounds like the Orange engine light is on? If yes, the 07 Rav 4 is a great car but suffers greatly with Lambda faults. You need the code read to be sure plus there are 4 lambda's on your car.

If it is a Red triangle light staying on then it could be low brake fluid level.

Dec 07, 2009 | 1996 Toyota RAV4

Not finding what you are looking for?
2003 Toyota RAV4 Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...