Question about 1992 Chevrolet Camaro

1 Answer

How do i change the ignition cylinder on my 1992 chevrolet camaro

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,068 Answers

Need to have the tool to compress the steering wheel lock plate and steering wheel and then it is not bad to do.

you can get them on rental from auto zone!

first remove steering wheel with puller then remove lock plate with compressor tool and you will have to take the clip out after compressing the lock plate you will see the c-clip around the column shaft.

once that is off you can remove lock plate and gain access to the multi function assambly that un screws with three main philliups head screws and the screw hoding the blinker arm and the flasher switch to it.

once those all are remove you can pull straight back towards you on the multi fuctin ***. it has a bunch of wire connected to it but don't worry they will pull out just far enough to get that out of your way.

once pulled back you will see a plastic piece that has two brass metal tabs on it on the right inner side of the column near the ignition switch. carefull pull straight back on it being extra crefull not to break it and once that is out you will need a t20 torx screw driver to remove the retaining torx bolt holding the ignition in.

once that is out your ingintion will come right out. install everything in the reverse procedure.

let me know if you have any more question. good luck

Posted on Sep 29, 2009

  • michael schultz
    michael schultz Sep 29, 2009

    just want to add i love these cars! love them so much i have three of them! can't get enough of the f-body cars! good luck man

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you locate and change an ignition control module on a 1994 Camaro?


1994 Chevrolet Camaro 3.4L SFI 6cyl

The Control Module-Ignition is located: Under hood, center, front engine area, below valve cover, mounted in distributorless ignition assembly

1994 Chevrolet Camaro 5.7L SFI OHV 8cyl

The Control Module-Ignition is located: Under hood, center, rear engine area, mounted in distributor

Jul 18, 2015 | Cars & Trucks

1 Answer

Diagnos ignitiom circuit on 92 Camaro 3.1liter /how to check


what referring to ignition switch or direct ignition system.for problem with direct ignition system either ignition module fails or the crankshaft position sensor faulty if you not getting no spark at spark plugs.

Aug 11, 2013 | 1992 Chevrolet Camaro

1 Answer

I just put a new ignition lock cylinder in my 92 Camaro Rs and I can't turn the key to lock which keeps it from releasing the key. What should I do?


Your ignition switch may be out of adjustment. If you did not pull apart the whole column and get the rack, which is opposite the lock cylinder, out of time then try sliding the switch downwards.
The swicth is located at the bottom of the column on top of the tube.

Jul 25, 2011 | 1992 Chevrolet Camaro

1 Answer

Remove security off a 1990 camaro because changed the ignition


One way is to change out the chip from the cars computer. Another way is use a General Motors GM VATS Override Bypass Kit, I'v learned that there is a pre-packaged set of resistors for the 15 GM resistor values I found a place called Sonic Electronix. Sonic here it is: http://www.sonicelectronix.com/item_...+DEI+652T.html
There is also a bit of misinformation on the internet Some tips I've learned when searching out this.
Example: Myth: The standard ignition cylinder lock will not fit or work in place of the vats ignition cylinder lock. Wrong! The standard 1990 camaro cylinder lock fits slightly deeper inside the column, so this takes away your ability to push in the key and turn it backwards for the accessory position. Other than that, it works fine for turning on the ignition.
I hope this helps some.

May 13, 2010 | 1990 Chevrolet Camaro

2 Answers

Changed a 1992 steering colmm,from a 1988 camaro,how do i by pass the chip key


You will need to remove the VATS module completely along with the harness. I would obtain a FACTORY Camero Chassis Manual with can be purchased on Ebay and a lower cost. This is a complexed job to take for so many wires are linked to many ares and need to be jumped once removed. Any wires going to the PCM ( computer ) will need to be spliced. I would leave this be and install the ignition cylinder with a resister key (chip type) which is much easier and a good theft deterent too

Mar 27, 2010 | 1992 Chevrolet Camaro

1 Answer

How do i change the ignition key cyliner on a 2000?


leave well alone ,if it starts and runs but the little light flashes then cover it with a bit of black tape .Big bag of worms and could cost mega bucks for a new ECU so dont touch

Nov 25, 2009 | 2000 Chevrolet Camaro

1 Answer

How do i change the ignition switch on 89 camaro?


I have not change the switch on a Camaro, but I have changed them on other vehicles, such as a 1985 Chevy truck. It should be similar. You do have to remove the switch from the cylinder lock first. On my 85 truck, there was a ring that held the switch to the lock. I disconnected the wires (after making a drawing showing where each went) then screwed off the ring and removed the switch.

Jan 18, 2009 | 1989 Chevrolet Camaro

Not finding what you are looking for?
1992 Chevrolet Camaro Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...