Question about 1999 Jeep Cherokee

Open Question

My jeep rotates but does not start i have no fuel at the fuel rail and none of my gauges on my cluster work all of my fuses are good and battery is brand new

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

01 Jeep grand Cherokee I have crank but no start no gauges no power at fuel pump. All fuses good under dash & hood . Turn key to on, 1st warning light low fuel. 2nd key w/ line 3rd check engine help

you used voltmeter at the pump?> or just didnt here it run
do say this...please. details, matter....
it told you low fuel is it? is the fuel gauge near "E"
why not state that first.?
dead gauges, be 1st right, smacks of gross power loss.
right>? not clear to me what no gauges means.
but the voltmeter is #1 no?

did you tests fuse that look ok. fuse that look ok can be bad.
no gauges, means all dead, no movement,
well the fuel gauge must work , does it, does it match reality?
cranks but never runs. good input there.

does not run for the jeep 3 seconds.? (ASD rules)
no 12vdc power to pump, when cranking,?
01 grand WJ jeep usa.
is the skim lamp off, the cluster lamp for SKIM security is first.
it must go out after key turn on, or it will never run, ever.
I can help.
WJ jeep
this jeep has a voltage gauge, it must read 12v keyon
if not power is lost, or battery low.
if cranks that tells me the fues blew.
skim cuts spark and fuel, not cranking btw.
2002 cluster
see that lamp 12, if stuck on car will never start but will crank.
the lamp falses if skim is not working or stays on for ******* key.
IF You can not scan a modern jeep then it can near impossible to diagnose (a hard cold fact)
IF the ASD fails to work, the PCM tells you every time
all 8 ways for it to fail.
but that takes a scan tool (any modern scanner works,)

Jan 26, 2017 | 2001 Jeep Grand Cherokee

2 Answers

I have a 2002 Jeep Grand Cherokee 4.0 . none of my dash gauges are working , including the speedometer

The Halo, on your ing key, you know the light ,is it working, if not your fuse blown, electrical short, wire grounded.

Jan 02, 2017 | Jeep Cars & Trucks

1 Answer

I had batteries and fuel pump replaced not my gauges arent working. Fuses ok (both)

What is year--make--model?
Your saying none of your instrument cluster gages are working?
On newer vehicles, the instrument cluster could be considered a computer. If batteries is disconnected. You may need to program instrument cluster. I don't know how many batteries you have? Gasoline usually one, diesel usually two.

Not only check applicable fuses, check voltage at fuse circuit. Even if the fuse is good, if no voltage at fuse circuit, circuit is still dead. Use a test lite to check voltage at fuse circuit.

Are there any applicable trouble codes?
On newer vehicles, they are making it harder and harder to work on them, unless you have a scanner that can communicate with whatever module your having a problem with? Those type scanners can be expensive, I don't have one of those.

Apr 16, 2016 | Cars & Trucks

1 Answer

None of the dash gauges work on my 99 jeep Cherokee

remove the cluster clean contacts with dielectric spray then apply dielectric grease to connectors and reinstall if this doesnt help you need a cluster

Aug 05, 2009 | 1999 Jeep Cherokee

1 Answer

The gauge cluster stopped working my radio works but nothing else

remove cluster clean terminals with dielectric cleaner then coat pins with dielectric grease that shoul do it

Jun 23, 2009 | 1996 Jeep Cherokee Country

2 Answers

97 Jeep Wrangler Dash Gauges Arent Operating..everything else ok!

ck the engine to body ground.located back side of engine and srew to firewall.

Jun 01, 2009 | 1997 Jeep Wrangler

1 Answer

Gauge's not working

There should be 2 connectors on the back of the cluster that you will have to check are still in place. Unhook battery then start taking off trim pieces until you can pull the cluster out enough to make sure the connectors are tightly snapped in.

Nov 20, 2008 | 1997 Jeep Cherokee Country

1 Answer

A big problem

hello first thing is check for spark at your coil and fuel at the throttle body a no start problem i would check the ignition module if theres no spark present fuel pump if no fuel as far as the instrument cluster double check fuses especially for gauges if good check your ground on your firewall to engine and ground to your fuse panel ect goodluck

Sep 08, 2008 | 1997 GMC Jimmy

Not finding what you are looking for?
1999 Jeep Cherokee Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides