Question about 1994 Ford Explorer Limited

1 Answer

My 94 ford explorer keeps blowing the 30 amp EEC fuse under the hood. What can be causeing this to happen?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

There has to be a short in the EEC. My advice would be to take it to a mechanic you don't want to be playing with electronics if you don't have the expertiese. It's a good way to fry more systems

Posted on Sep 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Eec fuse blowed while driving and blows each time replace it


must have a short to earth ,would'nt advise using wire no matter what the situation,trace the wires and find a break or worn part , might be rubbing against a metal edge somewhere

Apr 02, 2014 | 1994 Ford Explorer Limited

1 Answer

What would cause the 30amp ignition fuse on 95 ford ranger to blow?


WHEN A FUSE BLOWS YOU HAVE A SHORT OR SOMETHING SHORTING OUT IN THAT CIRCUIT.MANY THNGS CONTROLLED BY 30 AMP FUSE PCM POWER RELAY, POWER WINDOWS.LOOK ON FUSE DIAGRAM COVER FOR 30 AMP FUSE THAT BLOWING SEE WHAT CIRCUIT THAT FUSE CONTROL OR LOOK IN DASH OWNERS MANUAL SEE WHAT THE 30 AMP FUSE CONTROL SEE WHAT CAUSING IT TO BLOW.

Sep 11, 2011 | 1995 Ford Explorer

1 Answer

Ford explorer eec relay


Try a new relay first. This may not be good news if that does not work. If you can find the EEC (computer) and unplug it, then replace the fuse-if it blows you have another cheaper part on the circuit thats bad.
If the fuse does not blow, then the EEC must be shorted.
If you have to replace the EEC you may find a kindly dealer with a cash-for-clunker sitting there to violate. Salvage yards have them, Ebay sells them. I have seen them at swap meets for $20. They are a high price part even rebuilt at Dealers or autoparts stores.

Aug 24, 2009 | 1991 Ford Explorer

1 Answer

1991 ford ranger 3.0 eec relay fuse keeps blowing fuel good no spark.Changed the distribitor, changed the ignition module.


I understand that there is a relay box under the hood with 3 relays. Which is which I don't know. However if you are blowing the fuse TO the ecc relay, then the relay must be bad. This relay controls the spark.

Jul 25, 2009 | Ford Focus Cars & Trucks

1 Answer

EEC fuse keeps blowing


replace with a fuse 5 amps higher than required, keep increasing until it stops

Jun 16, 2009 | 1992 Ford Explorer

1 Answer

E.E.C. relay causing power draw and killing my battery


My girlfriend has an eddie bauer as well. We had an issue where the blower motor for the heater comes on unexpectedly when the key is out and it's parked. And kills the battery ... in about 3 hours ... We pulled the 30A blower motor fuse under the hood ... I think it was called the ECC fuse Electronic Climate Control ... Go put that fuse back in ... sit in the car the blower for your heat may come on ... Maybe ... ours happened onlt 2x in 6 months, then it has been fine ... there are two possible solutions replace the ECC motor control (under the hood and fairly difficult to get to), or it could be the less likely Dash heat contol panel ... both are costly

Apr 01, 2009 | 1991 Ford Explorer

2 Answers

1994 ford explorer not staying on


Did you try the fuse panel under the hood. I have a 1994 Explorer with over 100,000 miles and it would do the same when I was driving it would sometimes just shut off. Check the EEC (Electronic Emission Control) Fuse (30 AMP) under the hood and see if it's blown, I replaced mine with a 40 AMP fuse and it worked.

Dec 17, 2008 | 1994 Ford Explorer Limited

1 Answer

EEC fuse: 1992 ford explorer


sounds like you have a bad relay that is shorted out or you might have a bad fuel injector shorting out fossible fuel pump wireing short do some probing aroun with the multi meter try to find direct short , use the process of elimination .
now let me see does your truck start up and run then fuse blows? is the fuse the correct amperage check your owners manual to see how long does it run before blowing fuse ? when its running is it running smooth while is running?

Jul 03, 2008 | 1992 Ford Explorer

2 Answers

E.E.C fuse keeps blowing in 1991 Ford Explorer


sounds like you got a short try tracing harness to see if theres anything visible

May 26, 2008 | 1991 Ford Explorer

Not finding what you are looking for?
1994 Ford Explorer Limited Logo

Related Topics:

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...