Question about 1990 Mazda MX-6

Open Question

Can u tell me where i can find a gear shift

Can u tell me where i can find a gear shift linkage for a 1990 mazda mx6

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Mazda MX6 Clutch pedal has no push back from floor but still shifts


I am not a mazda guy but it sounds like the pressure plate is bad. Have you check the clutch linkage to be sure something did not slip or break. If so I would be looking at the clutch pressure plate.

May 18, 2017 | Mazda Cars & Trucks

1 Answer

2004 mazda 6 wont shift out of 1st gear smoothly. It whines, then finally catches. If it's cylinder (will be 3rd one) which number is it?


your gear selector linkage cable has come adrift from the linkage bracket just below the battery tray ,you can temporarily fix with two cable ties ,but will need to replace one of the two cables one is for neutral and the other is to select gear

Jan 09, 2013 | 2004 Mazda 6

1 Answer

2000 mazda 626 5 speed manual transmission is stuck in a gear and won't shift out


A clutch problem will not interfere with gear selection when the engine is off and the car stationary.

It does seem like you have a gearbox or gear linkage trouble.

Sep 16, 2017 | 2000 Mazda 626

1 Answer

1990 Porsche 911 Carerra 2 Targa (964)...car was shifing fine...now is stuck in second gear. Clutch will engage...but no other gear is selectable. ...no strange noises...just will not...


YEP SHIFT LINKAGE LOOSE OR WORN NEED ADJUSTMENT.ADJUST THE SHIFT LINKAGE BY POSITION THE SHIFT LEVER IN NEUTRAL .REMOVE THE REAR TUNNEL COVER IN FRONT OF THE REAR SEAT.PULL THE RUBBER DUST COVER FORWARD ON THE SHIFT ROD.LOOSEN THE CLAMP BOLT ON THE SHIFT ROD.MOVE THE TRANSMISSION SELECTOR SHAFT ALL THE ITS LEFT STOP,KEEPING IT IN NEUTRAL.WITH THE TRANSMISSION STILL IN NEUTRAL . MOVE THE GEARSHIFT ROD TO THE RIGHT TO ITS STOP.TIGHTEN THE CLAMP BOLT TO 18 FT LBS.TEST THE SHIFT LEVER PLAY SHOULD BE THE SAME IN ALL GEARS IN ALL DIRECTIONS.

Apr 18, 2011 | 1990 Porsche 911 Carrera

1 Answer

Won't go in reverse and all gears are in forward motion including nutral


check the linkage from the tranny, is it an automatic tranny ?, make sure the shifter cable is moveing in and out when you shift gears, if it moves both ways you might have to adjust the linkage again as it could have slipped, hope this helps.

Dec 30, 2010 | 1990 Mazda 323

1 Answer

2001 Mazda 626 will not come out of park. Gear


shift cable or linkage is broke or poped off

Nov 16, 2009 | 2001 Mazda 626

1 Answer

Shift linkage, ? trans dosn't seen to go into gear


look on the top of your trans have a friend or gf shift the car from gear to gear when nor running look for moving cable if none then time to take the console apart
remember there are also shift linkages on some models so you might ha ve to jack the car up and go under it to find linkage
they are only bolted on under car and in a ball others

Jul 29, 2009 | 1992 Mazda MX-3

Not finding what you are looking for?
1990 Mazda MX-6 Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...