Question about 1999 Cadillac DeVille

1 Answer

I CHANGED MY REAR BRAKE PADS , NOW MY SERVICE DRIVING STABILITY,AND ABS LIGHTS ARE ON AND POWER STERRING IS STIFF

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 92 Answers

Sounds like you may have damaged, dislodged or unplugged one of the rear wheel speed sensors or their connectors while doing the rear pads. they are mounted directly on the hub and are the only component w/ wires going to them

Posted on Sep 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2006 Cadillac STS is braking by itself with all these lights on..stabilize stability system brake assist..etc what is going on could someone help


problem usually narrows down to abs system problem or hub failing causing problem with abs --have vehicle scanned for the trouble code it will assist you as where to start in repairing problem most auto stores offer this service for free --in the mean time pull the abs fuse so brakes can revert to a normal non abs system till repairs can be made

Jun 04, 2017 | Cadillac Cars & Trucks

1 Answer

How can i reset esc and abs dash light


The warning lights will stay on until the problem with the stability control and anti lock braking system is addressed and rectified.

If the warning lights are still showing there is still a problem with the system such as faulty wheel sensors.

May 19, 2015 | 2010 Hyundai Getz 1.6

1 Answer

Abs codes an brake codes


NEVER lift a vehicle with Air Shocks because you will damage the Shocks themselves. Did you work on the Brakes? Air in your System? Break a Wire?

Feb 13, 2014 | Oldsmobile Aurora Cars & Trucks

1 Answer

I have a 2007 Chevrolet uplander van I keep getting three messages , service the ABS system, service the traction system and service the stability system. I have changed front brake pads what else do I...


when you do the pads you will notice wires coming out of the front hubs clean up the plug ins .. its for the abs if the contacts get dirty your lights come on . start here other wise it can get complicated. do the same at rear i dont know if you have rear disc brakes you may not ??

Nov 21, 2013 | Cars & Trucks

1 Answer

Abs light on anf off after rear brake job. Today


Not a booster problem. what bad noises? abs problmes wont make noises, unless its the pump operating. ck the mushy pedal, that will maybe fix all problems. I dont think its related to the 2/4wd lights?

Jul 23, 2010 | 2000 GMC Jimmy

2 Answers

My DSC and Brake warning lamps continuously light up in yellow once the engine has warmed up. They remain on after driving for a while and sometimes they shut off. Any ideas?


Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car

Jul 09, 2009 | 2001 BMW 325

1 Answer

ABS and ASC warning lights stay on 2000 530d


Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car

Jul 06, 2009 | 1999 BMW 5 Series

1 Answer

Bmw 520i 1999 abs/asc lights on diagnostic


Check to see if your brake pads and rotors are in good condition. Or if you have replaced the pads yourself and have not reset the wheel sensors this would cause the ABS Antilock Brake System light and the ASC Automatic Stability Control light to stay on as the ASC uses the ABS brakes with computer assistance to control the car

Jul 05, 2009 | 1999 BMW 323 Series

1 Answer

Dcs and abs light staying on


car is sensing a problem with the stability control system (DSC) or the antilock brake system (ABS). usually an ABS problem will turn off the DSC, so DSC may be ok, just ABS needs a look at.

since its an '08 model, it should still be covered by the BMW warranty provided you live in the USA. take it in and have them fix it. not safe driving with both systems deactivated.

Feb 23, 2009 | 2008 BMW 528i Sedan

1 Answer

How do you reset service stability control & ABS


please send $100 to me and ill send you solution.. I was interested in your service until i heard some of your answers like requires expert must take to pro??? gee thanks for $15 advice

Sep 25, 2008 | 2001 Cadillac DeVille

Not finding what you are looking for?
1999 Cadillac DeVille Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...