Question about 1988 Mazda B2200

Open Question

1990 mazda b2200 pickup after 15 to 30 min of running the engine quits then in about 10 to 15 min it runs fine. I crank the engine but it just cranks and cranks I checked to see if it had spark. I checked at the coil wire then plug 1 spark was good I removed the gas line to the fuel injection system and pumped gas into a bottle and it pumped as the engine cranked put the hose back on still would not start then I wait 10-15 min starts right up runs very smooth and has a lot of power new plugs new wires new fuel filter.

Posted by on

  • ekandefer Sep 29, 2009

    Hello,

    There is nothing for me to look at where is the solution??

  • Anonymous Mar 26, 2014

    I have spark. There is gas while cranking. It won't fire when I put WD40 in the cylinders.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a 1990 ford ranger engine fit 1990 Mazda B 2200 truck without any modifications?


No it will not. Only a comparable engine from another mazda b2200 truck and I think the b2000 and possibly Miata, 2.2 engines were about the same from 1986-1993. You can pretty much count out just dropping in a motor from a different manufacturer for any make. Fords don't fit chevys, etc. etc., This would require you modify the entire drive train and quite possibly the electrical system, cooling system,etc. Definitely not worth the hassle involved.

Jul 22, 2014 | 1990 Mazda B-Series

1 Answer

2000 mazda protege kills and it wont crank back up for 10 mins


Have you checked for spark and fuel pressure while it will not start ?

Feb 09, 2013 | 2000 Mazda Protege

1 Answer

How to quiet noisey lifters


replace lifters or run diesel fuel thru engine at next oil change to remove sludge and coating on lifters

Mar 03, 2010 | 1988 Mazda B2200

1 Answer

Suburban stalls while driving after running for 15-30 minutes. After letting it sit for 5-10 min it runs fine for another 5-10 minutes, then starts doing it all over again.


a bad crank sensor can cause this. shuts off while going down road, and will start about 10 min, later with no problems runs fine until it quits again. hope this helps,

Oct 07, 2009 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

'98 s-10 won't crank and run


bad conection on starter solonid tray diferent starter or solonoid

Mar 13, 2009 | 1998 Chevrolet S-10 Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...