first ever post, with displacement . 93 Rodeo,
so can be looked up .
the belt (gates) comes with instructions, did you buy a cheap
china belt off fleabay? with none?
its a DOHC engine.
first the warning. at step 13
Set the timing sprockets so that the crankshaft and camshaft sprocket timing marks align with the timing marks on the oil pump and front plate. When the timing marks are align, no pistons are at TDC for the compression stroke. Valve damage may result if the sprockets and belt are out of alignment.
there is a tensioner that as a locking pin,.do you know how to do that?
ill not answer how do it all, only the timing question.
here is the answer.
Ill answer not for removal but install.
install : step 1 and 2
- Align the groove on the crankshaft timing pulley with mark on the oil pump.
- Align the marks on the camshaft timing pulleys with the dots on the front plate.
photo 1 shows crank marked at 3pm cog wheel. and pump base.
photo 2 shows.
there is more , but do log in at alldata.com and read all steps.