Question about 1997 Honda CR-V

1 Answer

I still have the problem with my 1997 honda cr-v .the diagnostic code is 14-01 - IAC -circuit failure.i have replaced the idle air control valve and it wont go.the idling is erratic and it starts and stalls in the morning but gets ok after acceleration.what is the solution to this problem?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 92 Answers

1)is the IAC new or used?
2)did you clean the IAC's air passages in the throttle body? sometimes those carbon deposits can be significant. shoot throttle body cleaner in there until most of the black is off
3)the IAC circuit is completely bypassed during acceleration because of air passage through the main throttle flap, therefore it is normal that acceleration is unaffected in spite of a problem in the IAC circuit

Posted on Sep 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 ford escort wagon lx 4cyl standard won't idle, dies at stops. Had idle throttle sensor and throttle sensor replaced. Doesn't help even though when coded it said that was the problem. Help!


The DTC - diagnostic trouble code may have had the word IAC - idle air control etc.... that doesn't mean the valve is bad . The IAC has electrical circuits associated with it . There could be an open circuit , short to ground , short to power etc.... The Idle air control passage could be plugged . How To Fix Car That Idles Poorly Clean the IAC
Ford idle air control valve IAC test stalling problems

May 06, 2017 | Ford Cars & Trucks

1 Answer

How to fix fault code P1507


Possible causes
- Faulty Idle Air Control (IAC) valve
- Idle Air Control (IAC) valve harness is open or shorted
- Idle Air Control (IAC) valve circuit poor electrical connection
What does this mean? Tech notes
The P1507 code means that the engine idle is out of factory specification. Sometimes the Idle Air Control (IAC) may have carbon built up. Disconnect the car battery, remove the valve, clean, re-install valve, and drive the vehicle for about 5 minutes with the headlights and A/C ON to get the idle relearned.
If the problem persist, the IAC valve may need to be replaced.

Read more: http://www.engine-codes.com/p1507_ford.html#ixzz3sFPyZe00

Nov 22, 2015 | 2000 Ford Ranger SuperCab

2 Answers

Code p0507


possible causes are:

Dirty throttle body
Electric throttle control actuator incorrectly adjusted/faulty/damaged
Air leak on Intake
Poor electrical connection to the Intake Air Control valve

P0507 KIA Idle Air Control IAC System RPM Higher Than Expected

May 14, 2014 | 2003 Kia Sedona

1 Answer

P0508 code on 2001 Honda CR-V how do I troubleshoot


Hello,

P0508 = Idle Air Control System Circuit Low

Symptoms:
Engine Light ON (or Service Engine Soon Warning Light) - Engine hard to start - Rough or erratic idle speed.

Causes:
Dirty throttle body - Electric throttle control actuator misadjusted or damaged - Faulty Electric throttle control actuator - Intake air leak - Poor electrical connection to the Intake Air Control (IAC) valve.

Solution:
If there are no intake leaks, clean throttle body, adjust engine idle and erase engine code. If the code comes back you may have to replaced the Electric Throttle Control Actuator (Motor) to repair the problem.


I hope this helps!

Mike

Dec 12, 2011 | 2001 Honda CR-V

3 Answers

Need to fix p1504 code on lincoln zs v8 2001


P1504 Idle Air Control Circuit Malfunction, take off the idle air control and inspect the inside. the pintle inside can get dirty and cause it to get stuck. try cleaning it out with some brake clean and see if it helps. dont spray it ont he electrical connection though.

Aug 05, 2011 | Lincoln LS Cars & Trucks

1 Answer

My ford taurus SE 1999 have 3 codes P1504, P1507 and P1131


DTC Description Possible Causes Diagnostic Aides P1504 - Idle Air Control (IAC) Circuit Malfunction This DTC is set when the PCM detects an electrical load failure on the IAC output circuit.
  • IAC circuit open
  • VPWR to IAC solenoid open
  • IAC circuit short to PWR
  • IAC circuit short to GND
  • Damaged IAC valve
  • Damaged PCM
  • The IAC solenoid resistance is from 6 to 13 ohms.
    • IAC valve stuck open
    • Vacuum leaks
    • Failed EVAP system
    • Damaged PCM
  • The IAC solenoid resistance is from 6 to 13 ohms.
P1507 - Idle Air Control (IAC) Underspeed Error This DTC is set when the PCM detects engine idle speed that is less than the desired rpm.
  • IAC circuit open
  • IAC circuit short to PWR
  • VPWR to IAC solenoid open
  • Air inlet is plugged
  • Damaged IAC solenoid
  • Damaged PCM
  • The IAC solenoid resistance is from 6 to 13 ohms
  • Disconnect IAC valve and look for no change in engine rpm as an indication of a stuck or damaged valve
P1131 - Lack of HO2S-11 Switch, Sensor Indicates Lean A HEGO sensor indicating lean at the end of a test is trying to correct for an over-rich condition. The test fails when the fuel control system no longer detects switching for a calibrated amount of time.
  • Electrical:
    • Short to VPWR in harness or HO2S
    • Water in harness connector
    • Open/Shorted HO2S circuit
    • Corrosion or poor mating terminals and wiring
    • Damaged HO2S
    • Damaged PCM
  • Fuel System:
    • Excessive fuel pressure
    • Leaking/contaminated fuel injectors
    • Leaking fuel pressure regulator
    • Low fuel pressure or running out of fuel
    • Vapor recovery system
  • Induction System:
    • Air leaks after the MAF
    • Vacuum Leaks
    • PCV system
    • Improperly seated engine oil dipstick
  • EGR System:
    • Leaking gasket
    • Stuck EGR valve
    • Leaking diaphragm or EVR
  • Base Engine:
    • Oil overfill
    • Cam timing
    • Cylinder compression
    • Exhaust leaks before or near the HO2S(s)
A fuel control HO2S PID switching across 0.45 volt from 0.2 to 0.9 volt indicates a normal switching HO2S.

Mar 16, 2011 | 1999 Ford Taurus

1 Answer

I got a code on my 98 honda crv AWD P1509 what's that code means


P1509 - Idle Air Control Valve Circuit Failure

Solution:
- Replace the Idle Air Control Valve

Jan 24, 2011 | 1998 Honda CR-V

1 Answer

2005 F150 5.4 Cuts off when driving at constant speed and show "Engine Fail Safe Mode" on display. It will crank back up and run for several hundred miles before doing it again. P2112 Throttle Air...


unfortunately no ! Your best bet take it to the dealer . The P0420 always ends up being the catalytic converter ! P2104 isn't throttle air control . P2112 - Throttle Actuator Control (TAC) System - Stuck Closed. Description: This powertrain control module (PCM) fault status indicates the throttle plate is at a lower angle than commanded. Possible Causes:
  • Binding throttle body, stuck closed.
  • Damaged PCM.
Diagnostic Aids: Application Key On Engine Off Key On Engine Running Continuous Memory All GO to DV1
P2104 - Throttle Actuator Control (TAC) System - Forced Idle Description: The TAC system is in the failure mode effects management (FMEM) mode of forced idle. Possible Causes:
  • Open or short in multiple accelerator pedal position (APP) sensor circuits.
  • Damaged APP sensor.
  • Damaged powertrain control module (PCM).
Diagnostic Aids: This DTC is an informational DTC and can be set in combination with a number of other DTCs which are causing the FMEM. Diagnose other DTCs first. Application Key On Engine Off Key On Engine Running Continuous Memory All GO to QE1
P0506 - Idle Air Control (IAC) System RPM Lower Than Expected For Vehicles With Electronic Throttle Control (ETC) Description: This DTC is set when the powertrain control module (PCM) detects an engine idle speed that is less than the desired RPM. Possible Causes:
  • Air intake restriction.
  • Exhaust restriction.
  • Engine mechanical fault.
  • Damaged electronic throttle body (ETB).
  • Damaged PCM.
Diagnostic Aids: This DTC is informational only and it may be accompanied by other DTCs. Diagnose other DTCs first. If other DTCs are not present inspect the intake air system for air restrictions and damage. If no concerns are present, clear the DTC and retest. For All Others Description: This DTC is set when the powertrain control module (PCM) detects an engine idle speed that is less than the desired RPM. Possible Causes:
  • IAC circuit open.
  • Air inlet is plugged.
  • B+ or VPWR to IAC solenoid open.
  • Damaged or incorrect IAC valve.
  • IAC valve stuck closed.
  • VPWR to IAC solenoid open.
  • IAC circuit shorted to PWR.
Diagnostic Aids: Disconnect the IAC valve and look for little or no change in engine RPM as an indication of a stuck or damaged valve. Application Key On Engine Off Key On Engine Running Continuous Memory Vehicles With Electronic Throttle Control (ETC) Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. All others GO to KE1

Jul 03, 2017 | 2005 Ford F-150

1 Answer

1989 Honda Civic Diagnostic Codes 7 and 14


Code 7: TP Sensor (throttle position) defective circuit or unplugged/defective sensor.
Code 14: IAC Valve (Idle Air Control) defective circuit or unplugged/defective sensor.
Hope this helps you.

Nov 09, 2009 | Honda CRX Cars & Trucks

Not finding what you are looking for?
1997 Honda CR-V Logo

Related Topics:

311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...