Question about 2004 GMC Sierra Denali

1 Answer

How do i remove the door panel, drivers side 2004 sierra denali pick up

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 713 Answers

Fairly easy to do. Look inside the door handle area and you will see a small round or square plug cover pull it out and you will see a screw behind it, remove the screw. In the pull handle area you will see two more remove them. Check at the bottom of the door and make sure there are none there, generally not. You might have to remove the power window switch and check for a screw under it. Now the door panel will either have body clips holding it to the door or hook fastners, if it has the clips pull out on the door panel to release them then lift up. If it has the hooks just lift up on the door panel watch for wiring attached to the panel so you don't break them.

Posted on Sep 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix codes P0134 P0141 and P1133 on 2003 GMC Denali?


P0134 O2 sensor drivers side before catalytic converters.
PO141 O2sensor drivers side after converter
P1133 insufficient switching of O2 sensors. Will probably
go away once sensors are replaced.

Jun 24, 2014 | 2004 GMC Sierra Denali

1 Answer

How do I remove the passanger side door panel on a 2005 sierra denali to get at the cable connection to replace the power mirror?


Hi. Remove any visible screws and then use a still blade putty knife to gently lift the panel.
You will see plastic or metal clips which you will have to release one at a time until the panel is free. If you break a clip, don't worry as these are common items at any auto parts or auto body store. J.

Sep 18, 2010 | 2005 GMC Sierra

1 Answer

Air conditioner blows hot on drivers side, cold on passengers.


There is a door actuator motor that is not working,the dash will have to be removed to repair this problem.

Jul 13, 2010 | 2004 GMC Sierra Denali

1 Answer

I have a 03 GMC Denali, How do I replace the heater actuator,(air only comes out defroster and it makes a clicking noise when I first start it up)


the mode door actuator is under the drivers side foot area on the left side of the heater box. it has two 7/16 screws and one connector

Dec 10, 2009 | 2004 GMC Sierra Denali

1 Answer

Is it hard to replace a broken door handle on the outside driver side door of a 2004 gmc sierra extra cab with power windows and door locks?


its tricky but not hard. remove the door panel and put the window up, look in with a light and it will be obvious what to do......

Jul 07, 2009 | 2004 GMC Sierra 1500 Crew Cab

1 Answer

Replacing door handle driver side, exterior. How to release the lock set and put it on the new one?


u r asking 2 different things if u are working on a gm pick up as they r seperate items... door handle is bolted in, lock uses a clip... remove door panel!

Jan 11, 2009 | 1989 GMC Sierra

4 Answers

Location of fuse box/panel for 2004 yukon denali xl


There are 2 fuse panels in the Denali.
One is a panel on the drivers side, its on the dash but facing the door.

The ohter is under the dash and above the pedals, this one is much tougher to access.

Your Owner's Manual should tell you where the fuses are that you need to access.

Jun 15, 2008 | 2004 GMC Yukon

Not finding what you are looking for?
Cars & Trucks Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...