Question about 2002 Oldsmobile Aurora

Open Question

Ride height on rear socks ride high - 2002 Oldsmobile Aurora

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cadillac Escalade Suspension


Best Manuals

for the best solution of your problem visit this site

Apr 04, 2016 | Cadillac Cars & Trucks

2 Answers

Rear shock height


Whats the xact height of the normal shocks? If it not right, you got the wrong shocks installed..dont believe what anyone else says..

Jul 13, 2008 | 1991 Mercedes-Benz 560

1 Answer

Air supension stays too high


There could be a couple of problems, first and easiest is the rear height sensor became disconnected from its mount. This is common because the sponsor clips on by a kinda weak spring and can be easily disconnected.also where the sensor mounts is a small round metal ball that screws onto frame and rear suspension, the balls after time wear to the point that the sensor spring cannot hold on.there's also an adjustment on the lower mount, if you move it up the vehicle will lower....then you could have a concern with the air compressor vent not allowing it to vent down to ride height. Or the vent solenoid on top of each bag stuck also not allowing it to vent..to ck it yourself, go for a short ride around the block and when you come back park on a level surface, shut off car, exit and close door....listen for an auditable click in the rear, and front left corner of car and watch the distance between rite and wheel lip, see if it drops. If it does I would be leaning towards the simple adjustment...also check thr front ride height on level surface, if you have a suspension problem on 1side of the car and it sits lower,it will throw off rear ride height. ...

Jun 10, 2014 | 1995 Lincoln Town Car

1 Answer

Monster s4 rear ride height adjustment


Hi, Anonymous sorry you can't find the first and best tool you ever bought for your Ducati despair not for a mere $10 you can download another one. For more information about your issue and free valuable downloads that you will need please visit the websites below. Good luck and have a nice day.
http://www.ducatimonster.org/forums/tech/180432-adjusting-rear-height.html
Ride Height adjustment
DOWNLOAD Ducati Monster S4
Ducati OEM Parts Fiche Lookup and Online Ordering
Ducati Maintenance

Apr 27, 2014 | Cars & Trucks

2 Answers

1996 seville rear air ride too high


The ride level system uses an air compressor and either an air type of shocks or a type of air billow to raise and lower the vehicle, there is an adjustment to set the ride height and it is located under the vehicle and there is a control lever or rod that should be connected between the rear axle and a switch that is mounted on the body of the vehicle, and there will be an adjustment slot in the control lever between the switch and the body, and that is how you would adjust the ride level height, but be sure that the vehicle can not drop any further down if someone is under the vehicle trying to adjust the ride height.

However, you might find that the control lever to the ride level has fallen off from the switch on the body or it has come loose from the rear axle, and it is just hanging there not operating the switch on the body that controls the the ride level compressor.

Jun 06, 2010 | 1997 Cadillac Seville

1 Answer

Hard ride in rear 04 towncar


It looks almost like a little shock absorber and it is located above the rear differential. 

the ride height  is adjustable by adding or reducing the amount of air in the tires, ergo, any damage would occur in the tires, not the car. 

Mar 30, 2009 | 2004 Lincoln Town Car

1 Answer

EXPEDITION REAR AIR RIDE PROBLEM


do you have just rear air suspension? here's rear only. 4 wheel different. Deler an run a diagnostic test with WDS machine and get fault codes.
-------------------------------------------------------------------------------------
The air suspension system is designed to improve ride, handling and general vehicle performance for static, on-road and off-road driving conditions:
  • Ride is improved by using an air type spring (the soft ride is inherent).
  • Handling is improved by maintaining constant vehicle attitude.
The system consists of unique rear air springs, the air compressor, air lines, air spring solenoids, height sensor, air suspension control module, attachments and associated signals derived from both driver and road inputs. With these components and signals, the air suspension control module commands changes in vehicle height that are necessary for the load leveling features.
The load leveling feature rear air suspension (RAS) systems shall automatically make adjustments in vehicle height so that the vehicle is always at trim height and constant front-to-rear vehicle attitudes are maintained over the expected load range of the vehicle. Adjustments in height that are necessary to correct height differences between the vehicle's left and right sides for the RAS system shall be restricted to what can be reliably achieved with one air suspension height sensor.
The system uses one air suspension height sensor, a steering sensor, generic electronic module (GEM) and other vehicle sensors to measure driver and road inputs. The system changes vehicle height using an air compressor, two air lines and the use of air springs with air spring solenoids.
The air suspension system holds vehicle height when the rear hatch or any door is opened. The system stores rear vehicle height the moment any open door is detected. The system then maintains this height regardless of the addition or removal of a load. The system will return to its commanded height when all doors are closed or the vehicle speed exceeds 16 km/h (10 mph).
----------------------------------------------------------------------------------------
Air Suspension Height Sensor
One air suspension height sensor is mounted on the vehicle. The air suspension height sensor sends a voltage signal to the air suspension control module. The output ranges from approximately 4.75 volts at minimum height (when the vehicle is low or in full jounce), to 0.25 volts at maximum height (when the vehicle is high or in full rebound). The air suspension height sensor has a useable range of 80 mm (3.2 in) compared to total suspension travel of 200-250 mm (8 to 10 in) at the wheel. Therefore, the air suspension height sensor is mounted to the suspension at a point where full rear suspension travel at the wheel is relative to 80 mm (3.2 in) of travel at the air suspension height sensor. The air suspension height sensor is attached between the No. 5 frame crossmember (upper socket) and the panhard rod (lower socket).
When the air suspension height sensor indicates that the rear of the vehicle is lower than trim under normal driving conditions, the air compressor will turn on and pump compressed air to the air springs. When the sensor indicates that the rear of the vehicle is raised above trim under normal driving conditions, this will cause the air to be vented from the air springs to lower the vehicle back to its trim height level
------------------------------------------------------------------------------
  • Uneven vehicle height
  • Circuitry.
  • Rear pneumatic fault.
  • Air compressor assembly.
  • Air suspension control module.
  • Go To Pinpoint Test I .

Feb 21, 2009 | 2001 Ford Expedition

1 Answer

Air Ride Sensors Corroded?


you buy a car with all these electronics. ride hieght sensors for each wheel. this is affecting that. then when you go to the dealership you want them to replace only the exact one piece that fails. that could take hours of diagnosis time. at damn near 100 per hour. go ahead and give them the car. let them do diag. total price 2000. or you have narrowed it down to brains or sensor. do it yourself 1000. problem solved it should cost 1000-2000 to fix. if u find parts cheaper. money in your pocket

Jan 22, 2009 | 2003 Lincoln Navigator

1 Answer

Suspension


Yes, there is a rear ride height sensor.
Looks kind of like a little shock absorber.
You might be able to find it at NAPA or similar parts house.
You're looking at least $100.00 to $175.00 for the part if you can find them.

Oct 18, 2008 | 1996 Lincoln Town Car

Not finding what you are looking for?
2002 Oldsmobile Aurora Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...