Question about 1990 Chevrolet Corvette

Open Question

The valle switch on my LT5-ZR1 won't stay on - 1990 Chevrolet Corvette

Posted by on

  • lgndavidson3 Sep 29, 2009

    the e-mail is lgndavidson37@gmail.com

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What arm the specs for 95 camaro lt1 350


Block and Basics
Displacement: 350 cubic inches, 5733 cubic centimeters, 5.7 liters
Block Material: Cast Iron
Main Bearings: 2-Bolt Centers and Ends (The Corvette LT1/LT4 had 4-bolt mains)
Stroke: 3.48"
Bore: 4.00"
Compression Ratio: 10.4:1
Combustion Chambers: 54 cubic centimeters
Factory Redline Rating: 5700 Rotations Per Minute

Bottom End
Piston Material: (10159437) Eutectic Aluminum/Silicon Alloy
Connecting Rod Material: (10108688) Powdered Metal
Crankshaft Material: (12556307) Cast Iron

Top End and Valvetrain
Cylinder Heads: (10168448) Cast Aluminum, 2 valves per cylinder/16 valves total, ~212 CFM flow (Impala SS and Caprice heads were made of cast iron*)
Valve Diameter: (intake- 10241743, exhaust- 12550909) 1.94 intake, 1.50 exhaust
Valve Overlap: 41*
Valvesprings: (10206040) 85 lbs, seated
Camshaft Specs (12551705): 205/207 duration @ 50*, .447/.459" lift, 117 Lobe Seperation Angle
Rocker Arms: (10089648) 1.5:1 Stamped Steel
Timing Chain: (10128485) Powdered metal link

Intake and Fuel Delivery
Fuel Delivery: Electronic Fuel Injection, sequential port
Injector Size: (17124248) 3.0gps, 22lbs/hr speed density (1992-1993), 24lbs/hr mass airflow (1994-1997)
Throttle Body: 48 millimeter twin butterfly
Intake Manifold: (12552137) Aluminum

Factory Power Ratings
92-96 LT1 Corvette: 300bhp, 330lb-ft
1996 LT4 Corvette: 330bhp, 340lb-ft
1992 LT5 Corvette: 375bhp, 370lb-ft
93-95 LT5 Corvette: 405bhp, 385lb-ft
93-95 LT1 F-Body: 275bhp, 325lb-ft
96-97 LT1 F-Body: 285bhp, 325lb-ft
96-97 WS6/SS: 305bhp, 335lb-ft
93-97 Firehawks: 315bhp, 340lb-ft

Factory LTX Camshaft Specifications**:
1992 Y-body: 205/207 0.451/0.450 lift 117 LSA
1993-1995 Y-body, F-body: 202/207 0.450/0.460 lift 116 LSA
1994-1996 B-bodies (including L99 4.3L): 191/196 0.418/0.430 lift 111 LSA
1996 Y-body, 1996-1997 F-body: 200/207 0.447/0.459 lift 117 LSA
1996 Y-body, F-body LT4: 203/210 0.476/0.479 lift 115 LSA


hope this helps

Mar 04, 2015 | Cars & Trucks

2 Answers

Power window won t stay up


May need a new window regulator installed.

Aug 25, 2014 | 2002 Nissan Altima

1 Answer

P0121 corvette zr1 2010


Check the Corvette Action Center: http://www.CorvetteActionCenter.com

Nov 20, 2012 | 2009 Chevrolet Corvette ZR1

1 Answer

My car won't stay started on my 98 Lincoln I was


look this link


http://www.neverhotwired.com/vehiclekillswitch/

Mar 23, 2012 | 1998 Lincoln Town Car

1 Answer

My fiat 2002 fuel cut off switch won't stay down - time for a new one? Or is there a simple fix?


Sorry but the only fix is to replace it, the internal locking pawl is probably worn.

Feb 11, 2012 | 2002 Fiat Punto

1 Answer

Got a '90 ZR1 vette. Starts every morning, but...


i know it sounds old school but try tapping the starter kinda hard and then try starting it sometimes they get to hot and freeze up

Sep 17, 2009 | 1990 Chevrolet Corvette

1 Answer

Won't start.


have the starter checked at a shop that is able to rebuild them possibly arevised part for the starter selonoid.if that isnt the issue see if the battery cable to the starter has high resistance due to battery acid getting on the cable

Oct 04, 2008 | 1992 Chevrolet Corvette

Not finding what you are looking for?
1990 Chevrolet Corvette Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...