Question about 1999 Daewoo Lanos

1 Answer

I just get a 2000 lanos but the check engine ligth is ON when i put it the code reader says to me 2 codes : 1st code is P0137 and p1336 say a lot lf items but got to be only one of those , whath can be??? can you please help me??/ DANIEL

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 439 Answers

Essentially the same as P0136, P0137 refers to the second oxygen sensor on Bank 1. P0137 means the O2 oxygen sensor's voltage remained low for longer than 2 minutes. This, is interpreted by the ECM as a low voltage condition and sets the MIL. Bank 1 Sensor 2 is located to the rear of the catalytic converter and should produce an output signal relative to oxygen storage capacity of the catalytic converter. This rear (sensor 2) sensor is less active than the signal produced by the front sensor. However, if the ECM senses the sensor is inactive, this code will set.

Symptoms There may be no visible symptoms to the driver, other than the MIL (Check Engine / Service Engine Soon) illumination.

Causes
A code P0137 may mean that one or more of the following has happened:

  • Faulty O2 sensor Exhaust leak near the rear sensor
  • Plugged catalyst
  • Short to voltage on O2 signal circuit
  • High resistance or open on O2 signal circuit

  • Possible Solutions
  • Replace faulty sensor
  • Repair exhaust leak near the rear sensor
  • Check for restriction in catalyst and replace as necessary
  • Repair short, open, or high resistance on o2 signal circuit
The other code is your crankshaft position sensor. You need to replace both of the sensors and the check engine light will go off.

Posted on Sep 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is trouble code P1336


Here's what I've found about this P1336 code:
P1336 Crankshaft sensor is out of sync with camshaft sensor test
If you get this code, the first thing to check is your distributor especially if you have an imported vehicle. Look for signs of oil in the distributor which can contaminate the signals being monitored by the ECM (engine computer). Check also the wiring leading to the distributor and see if the wires are properly insulated away from hot exhaust which could burn the wires. Check also on the crank sensor location whether it is located in the front of the engine or at the flywheel at the rear of the engine. The same can be done for the cam sensor.
On engines with distributor, the cam sensor is usually located in the distributor and it will give you a lot of grief if not properly align and synchronize with the crank sensor. On some applications (like Ford), an alignment tool is required which is can be bought from your local parts store (cost about $31). If you install the distributor without proper timing, it will still run but the mileage will suffer and the above code showing up.
Your local trusted mechanic or Ford Dealer should be able to resolve this for you (if you can't) without too much trouble.

Jun 26, 2013 | Cars & Trucks

1 Answer

Check engine code p1336 xterra 2000


The crank position sensor is not sending a signal to the computer.
Could be the sensor, the wiring, or the sensor plate.

Dec 04, 2012 | Cars & Trucks

2 Answers

Trouble code P0137 FOR 2000 PONTIAC FIREBIRD 3.6L


PO137-- Oxygen Sensor Circuit Low Voltage (Bank 1 Sensor 2)

That woud be most likely at the converters outlet

Nov 28, 2012 | 2000 Pontiac Firebird

1 Answer

P0137 issues changed out manifold new sensor new cat converter. Still have p0137. HELP!


Essentially the same as P0136, P0137 refers to the second oxygen sensor on Bank 1. P0137 means the O2 oxygen sensor's voltage remained low for longer than 2 minutes. This, is interpreted by the ECM as a low voltage condition and sets the MIL. Bank 1 Sensor 2 is located to the rear of the catalytic converter and should produce an output signal relative to oxygen storage capacity of the catalytic converter. This rear (sensor 2) sensor is less active than the signal produced by the front sensor. However, if the ECM senses the sensor is inactive, this code will set.

There may be no visible symptoms to the driver, other than the MIL (Check Engine / Service Engine Soon) illumination.

A code P0137 may mean that one or more of the following has happened:
Faulty o2 sensor Exhaust leak near the rear sensor
Plugged catalyst
Short to voltage on O2 signal circuit
High resistance or open on O2 signal circuit

Hope helps; your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Oct 24, 2011 | 2000 Hyundai Elantra

1 Answer

Codes P0131, P0137, P0341, and B1218. Code P0131 and P0137 were listed twice. This is for a 2000 chevy venture. I already spent $400. 2 years ago for emissions


HI ghosthunter6 codes P0131&P0137&P0341 indicative of having electrical short .
P0131 Front Heated Oxygen Sensor Bank 1 harness is open or shorted .
P0137 Rear Heated Oxygen Sensor Bank 1 harness is open or shorted .
P0341 Camshaft position sensor harness or connectors (The sensor circuit is open or shorted) .
code B1218 horn relay coil circuit short to voltage battery .
IT could be cousin problem with other sensors .
First replace horn relay and clear E C M codes
IF problem and codes P0131&P0137 come back you need o2 sensors .put I don't thank so.
YOU MUST REPLACE HORN RELAY .OK

good luck


Jul 27, 2011 | Chevrolet Venture Cars & Trucks

1 Answer

Check engin light on. There are four error codes P0137,P0141,P0342, and P1792. How do I fix it. Will I pass inspection with these codes?


P0137 Error code Faulty O2 sensor Exhaust leak near the rear sensor
  • Plugged catalyst
  • Short to voltage on O2 signal circuit
  • High resistance or open on O2 signal circuit
Possible Solutions
  • Replace faulty sensor
  • Repair exhaust leak near the rear sensor
  • Check for restriction in catalyst and replace as necessary
  • Repair short, open, or high resistance on o2 signal circuit
P0141 Error code means Downstr Heated Oxygen Sensor Heater circuit fault - Bank No. 1.

- replacement is needed for this issue.

P0342 Error code means Camshaft Position Sensor Circuit Low Input

P1792 Error code means P1792 means the computer isnt properly programmed so if this code keeps comming back the pcm may need to be replaced


Aug 13, 2010 | 2002 Daewoo Lanos

1 Answer

I have code p0137 coming up on my 2003 jeep grand cherokee laredo what does the code mean?


P0137 - Oxygen O2 Sensor Circuit Low Voltage (Bank 1, Sensor 2)

Essentially the same as P0136, P0137 refers to the second oxygen sensor on Bank 1. P0137 means the O2 oxygen sensor's voltage remained low for longer than 2 minutes. This, is interpreted by the ECM as a low voltage condition and sets the MIL. Bank 1 Sensor 2 is located to the rear of the catalytic converter and should produce an output signal relative to oxygen storage capacity of the catalytic converter. This rear (sensor 2) sensor is less active than the signal produced by the front sensor. However, if the ECM senses the sensor is inactive, this code will set.

Symptoms: There may be no visible symptoms to the driver, other than the MIL (Check Engine / Service Engine Soon) illumination.

Causes: A code P0137 may mean that one or more of the following has happened:
* Faulty o2 sensor Exhaust leak near the rear sensor
* Plugged catalyst
* Short to voltage on O2 signal circuit
* High resistance or open on O2 signal circuit

Possible Solutions:
* Replace faulty sensor
* Repair exhaust leak near the rear sensor
* Check for restriction in catalyst and replace as necessary
* Repair short, open, or high resistance on o2 signal circuit

Hpe hti shelps (remember comment and rated this).

Jul 26, 2010 | 2003 Jeep Grand Cherokee

1 Answer

2000 saturn SL2,reader says PO131and (PO137 Peading)


P0131 - oxygen sensor circuit low voltage (bank 1 sensor 1)
http://www.obd-codes.com/p0131

P0137 - oxygen sensor circuit low voltage (bank 1 sensor 2)
http://www.obd-codes.com/p0137

www.obd-codes.com

These websites help me a lot. Hope they do the same for you too.









Jun 07, 2009 | 1999 Honda Civic

2 Answers

Code P0157 and P0137


Hi P0157 is
02 sensor circuit low voltage bank 2 sensor 1

P0137
02 sensor circuit low voltage bank 1 sensor 2

May 06, 2009 | 2000 GMC New Sierra 1500

Not finding what you are looking for?
1999 Daewoo Lanos Logo

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...